Dell 16GB DDR5 SDRAM Memory Module

Upgrade your Dell system with the Dell 16GB DDR5 SDRAM Memory Module, a high-performance memory upgrade designed for today’s demanding workloads. This 16GB RAM module features DDR5 technology at 4800MHz, a 1Rx8 configuration, and a UDIMM form factor, delivering noticeably faster data access, smoother multitasking, and enhanced responsiveness for creative, gaming, and professional applications. Built to meet Dell’s reliability and compatibility standards, this memory module is your straightforward upgrade path to better system performance without the hassle of compatibility guessing.

• Turbocharged performance for multitasking and heavy workloads — with 16GB of fast DDR5 memory at 4800MHz, you’ll experience quicker application load times, faster file transfers, and smoother data processing across creative suites, video editing, 3D rendering, and complex spreadsheets.
• Dell-validated compatibility for seamless upgrades — designed to work with Dell desktops and workstations that support DDR5 UDIMMs, this module is tested to ensure reliable compatibility, stability, and plug-and-play installation within Dell ecosystems.
• Efficient DDR5 architecture for power-conscious performance — DDR5 technology delivers higher bandwidth and improved power efficiency, helping to reduce overall system heat and extend battery life on portable Dell configurations where applicable.
• 1Rx8 single-rank configuration for balanced capacity and latency — optimized for a wide range of Dell platforms, the 1Rx8 arrangement offers solid bandwidth with reliable latency suitable for everyday tasks and intensive applications alike.
• Easy upgrade, reliable reliability, and warranty coverage — packaged as a standard 288-pin UDIMM module, this memory upgrade is designed for straightforward installation with Dell-ready reliability, backed by Dell’s service and warranty terms where applicable.

Technical Details of Dell 16GB DDR5 SDRAM Memory Module

• Capacity: 16GB
• Memory Type: DDR5 SDRAM
• Module Configuration: 1Rx8
• Form Factor: UDIMM
• Speed: 4800MHz (PC5-38400)
• Pin Count: 288
• Voltage: 1.1V (DDR5 standard)
• Compatibility: Dell desktops and workstations that support DDR5 memory and UDIMM form factor

How to Install Dell 16GB DDR5 SDRAM Memory Module

Installing the Dell 16GB DDR5 SDRAM Memory Module is a straightforward upgrade that can yield immediate performance gains. Before you begin, ensure your system supports DDR5 memory and that you have a compatible Dell model. Follow these steps for a clean and successful installation:

• Power down your computer completely and unplug all cables, including the power cord. If you’re using a laptop, remove the battery if it is accessible and removable, or ensure it is powered down with the lid closed.
• Open the computer case or access panel to reach the memory slots. For laptops, carefully locate the memory compartment and release the retaining clips or screws securing the current module or access panel.
• Ground yourself to prevent static discharge. This can be done by touching a metal part of the chassis or using an anti-static wrist strap. Avoid touching the gold contacts on the DIMMs.
• Align the new 16GB DDR5 UDIMM with the memory slot. The notch on the module should line up with the key in the slot. Gently press the module straight down into the slot until the side clips snap into place and secure the module.
• Reassemble the case or access panel, reconnect cables, and power on the system. Enter the BIOS/UEFI if needed to confirm that the module is detected and running at the correct speed (4800MHz). Save settings and boot into your operating system to verify the memory is recognized as 16GB.

Frequently asked questions

• Q: What does 1Rx8 mean in this memory module?
  A: 1Rx8 indicates a single-rank memory architecture with 8-bit wide data paths per chip. This configuration balances capacity and latency, providing reliable performance across a broad range of Dell systems that support DDR5 UDIMMs.
• Q: Will this module work with any Dell PC?
  A: It is designed for Dell desktops and workstations that support DDR5 UDIMM RAM. Always check your system’s memory compatibility and the motherboard’s supported speeds and configurations before upgrading.
• Q: Is 4800MHz the maximum speed for this module?
  A: The module is rated at 4800MHz. Your system will run at this speed if the motherboard and BIOS support it, otherwise it may default to a lower supported speed. Enabling XMP/DOCP profiles can help reach higher performance when supported.
• Q: Does this memory require any special software or drivers?
  A: No special software is required. Memory operates at the hardware level with your system BIOS/UEFI recognizing the module automatically once installed.
• Q: Is there a warranty or support for this memory?
  A: Dell memory modules typically come with warranty coverage through Dell or the retailer, depending on the purchase channel. Check the seller’s warranty policy for specifics and duration.