Dell Intel SFP+ Module — 10GBase-SR Fiber Transceiver for Data Networking

Experience reliable, high-performance fiber connectivity with the Dell Intel SFP+ Module, a compact plug-in transceiver purpose-built for data networking and optical networking environments. This 10GBase-SR optical module delivers fast, scalable Ethernet connections over multimode fiber, ideal for data centers, enterprise networks, and high-density server deployments. Engineered for ease of integration, it supports standard SFP+ interfaces, enabling seamless upgrades, simplified maintenance, and down-the-line performance that helps you meet growing bandwidth demands without overhauling existing infrastructure.

• High-speed 10GBase-SR performance for flexible fiber deployments: This module provides 10 Gigabit Ethernet over multimode fiber, delivering robust uplinks and inter-switch connectivity in data centers, campus networks, storage networks, and demanding business environments. By leveraging 850 nm laser technology, it achieves low latency and predictable throughput, helping to minimize bottlenecks in busy data paths.
• Plug-in SFP+ form factor for effortless installation: The module is designed as a hot-swappable SFP+ transceiver that slides into standard SFP+ ports on Dell switches, routers, and select third-party devices. Its plug-and-play nature reduces downtime during upgrades and expansions, enabling rapid deployment across heterogeneous networks and helping administrators scale capacity with minimal disruption.
• Broad compatibility and versatile integration: Compatible with Dell networking gear and a wide range of devices supporting SFP+ interfaces, the Dell Intel SFP+ Module offers vendor-agnostic interoperability due to adherence to SFP+ and 10GBase-SR standards. This makes it suitable for mixed-vendor data centers and upgrade projects that require reliable, cross-brand fiber connectivity without compromising performance or reliability.
• Reliable performance with standardized optical specifications: Built to meet established optical and electrical specifications for SR-class transceivers, this module uses a laser-based 850 nm VCSEL for efficient multimode transmissions. It supports duplex fiber connections (LC connector) and is designed to maintain signal integrity across typical data-center MMF runs, delivering consistent link quality and stable operation in dynamic networking environments.
• Cost-efficient upgrade path and long-term value: By enabling high-bandwidth 10G connections over existing multimode fiber infrastructure, the Dell Intel SFP+ Module helps you extend the life of your network while preparing for future upgrades to 25G or 40G/100G tiers. Its compact form, reliability, and straightforward deployment translate to lower total cost of ownership and a faster return on investment for data-center and enterprise networks alike.

Technical Details of Dell Intel SFP+ Module

• Form Factor: SFP+ plug-in module designed for standard SFP+ ports
• Data Rate: 10 Gbps (10GBASE-SR)
• Wavelength: 850 nm (multimode fiber transceiver)
• Fiber Type: Multimode fiber (MMF) using LC duplex connections; suitable for OM3/OM4 types
• Connector: LC duplex optical connector
• Standards: SFP+ MSA-compliant; compatible with IEEE 802.3ae 10GBASE-SR specifications
• Reach: Up to approximately 300 meters over standard MMF, with performance depending on fiber quality and cable design
• Power and Environment: Designed for typical data-center operating conditions with low power consumption relative to legacy transceivers; temperature and EMI tolerance aligned with industry norms for SFP+ modules
• Compatibility: Optimized for Dell networking hardware and broadly compatible with other vendors’ devices that accept SFP+ SR transceivers

how to install Dell Intel SFP+ Module

Installing the Dell Intel SFP+ Module is a straightforward process designed to minimize downtime and ensure a secure connection. Before you begin, identify the appropriate SFP+ port on your Dell switch, router, or cross-brand device that supports 10GBASE-SR transceivers. Ensure the equipment is powered down if your maintenance procedures require it, though many SFP+ installations can be performed with devices in a low-power or operational state depending on your hardware policy. Follow these steps to install correctly:

• Power down (if required by policy): Review your equipment’s maintenance guidelines. Some deployments allow hot-swapping of SFP+ modules, while others require power-down to avoid potential ESD or signaling issues. If hot-swapping is permitted, proceed carefully.
• Locate the SFP+ port: Find an appropriate SFP+ slot on your Dell switch, router, or compatible device. SFP+ ports are typically labeled and positioned in the front panel of the hardware, often adjacent to other optical interfaces.
• Remove the slot cover or dust cap: If a protective dust cap is in place, gently remove it to expose the LC duplex connector socket. Keep the dust cap nearby for future use when disconnecting the module.
• Insert the module: Align the Dell Intel SFP+ Module with the port and slide it in firmly until it seats fully with a soft tactile click. Do not force the module, and ensure the tab or latch engages as designed for secure retention.
• Connect the fiber and verify: Attach the LC duplex fiber cable to the module’s connector, ensuring the correct polarity. After installation, power up the device if needed and monitor the port LEDs for link establishment. Use the device’s management interface to verify the 10G link status and negotiated speed.
• Test end-to-end connectivity: Perform a basic connectivity test, such as pinging a known-good device or validating throughput with a diagnostic tool, to confirm that the transceiver is transmitting and receiving correctly across the fiber path.

Frequently asked questions

• Q: Is the Dell Intel SFP+ Module compatible with Dell switches and non-Dell equipment? A: Yes. The module is designed as a standard SFP+ transceiver using 10GBASE-SR specifications, ensuring interoperability with Dell networking gear and many third-party devices that support SFP+ SR and duplex LC fiber connections. Always verify compatibility with your specific model and firmware version before deployment.
• Q: What kind of fiber do I need for this module? A: The module uses 850 nm multimode fiber (MMF) with LC duplex connectors. For optimal performance, use high-quality MMF cables such as OM3 or OM4. These fiber types are common in data-center environments and support the 10GBASE-SR transmission distances specified by the module.
• Q: What is the typical reach of 10GBASE-SR transceivers? A: In standard multimode fiber, 10GBASE-SR transceivers commonly reach up to approximately 300 meters, depending on fiber quality, cabling, and network design. For precise reach in your environment, consult the fiber category and cable length guidelines applicable to your installation.
• Q: How can I verify that the transceiver is functioning correctly? A: After installation, use the switch or router management interface to check the port status, link light, and negotiated speed. You can also run connectivity and throughput tests to ensure the link is stable and delivering the expected 10 Gbps performance. If the port does not come up, recheck the module seating, fiber connections, and compatibility of firmware versions across devices.
• Q: Can I mix vendors when using SFP+ SR modules? A: In many cases, SFP+ SR modules are cross-compatible with other brands if they adhere to the SFP+ MSA standard. However, some devices may require specific vendor-approved modules or firmware updates to guarantee full compatibility and optimal performance. Always validate mixed-vendor deployments in a controlled environment before rolling out widely.