Eaton 9130 UPS — 2000 VA, 1800 W, 208V Online Power Protection

The Eaton 9130 UPS delivers premier online power quality and scalable battery runtimes for servers, voice and data networks, storage systems, and other IT equipment. Designed to protect critical workloads from outages, sags, and surges, this 208V online UPS provides constant clean power to keep your data center or office infrastructure running smoothly. With an efficiency rating exceeding 95%, the Eaton 9130 helps reduce energy costs while ABM technology extends battery life and minimizes maintenance, delivering long-term value for modern IT environments. Whether you’re powering a small data closet or a growing edge deployment, the 9130 combines reliability, efficiency, and scalable runtimes to support uptime and business continuity.

• Online power quality with scalable runtime. The Eaton 9130 uses online double-conversion technology to deliver continuous, clean power to servers, storage systems, and network devices. This means instantaneous response to power disturbances and zero transfer times, ensuring sensitive equipment stays online through brief outages and brownouts. Combine this with scalable battery runtimes to match changing workload demands and growth trajectories.
• High efficiency for lower operating costs. With an efficiency rating of >95%, the 9130 reduces energy consumption and heat generation in data centers, equipment rooms, or remote sites. Efficient operation translates into cooler facilities, lower cooling costs, and improved overall data center economics while maintaining high protection standards for your IT assets.
• ABM battery management for longer life. Adaptive Battery Management (ABM) technology optimizes battery health and service life, reducing the frequency of battery replacements and maintenance. This intelligent battery care helps extend runtime availability and reliability, which is especially valuable for multi-year deployments or environments with limited maintenance windows.
• Versatile 208V output with mixed outlets. The Eaton 9130 provides robust output options to accommodate diverse IT equipment, including eight IEC C13 outlets and one IEC C19 outlet, all delivering 208V. This configuration supports a wide range of servers, storage units, switches, and network gear, simplifying rack provisioning and cable management while ensuring power is distributed where it’s needed most.
• Secure, reliable input connection for data-center-grade installations. The L6-20P input plug (20A, 208/240V) is designed for secure, locking connection to standard data-center power circuits. This reduces the risk of accidental unplugging and helps maintain continuous protection for critical workloads in environments with robust electrical infrastructure.

Technical Details of Eaton 9130 UPS

• Capacity: 2000 VA / 1800 W rated output to support essential IT loads with headroom for growth and virtualization needs.
• Input: L6-20P locking input connection configured for 208V (typical data-center and commercial power environments).
• Output: 208V delivery through (8) IEC C13 outlets and (1) IEC C19 outlet to accommodate a mix of servers, storage, switches, and other IT gear.
• Efficiency: >95% operating efficiency, delivering energy savings and cooler operation in rack rooms and edge environments.
• Topology: Online double-conversion architecture ensures continuous, isolated power with clean voltage and frequency regulation for sensitive equipment.
• Battery runtime: Scalable runtimes with optional battery modules, enabling you to tailor protection to your workload and uptime requirements without overprovisioning.
• Management: Intuitive onboard display for real-time status, plus remote monitoring options to integrate with existing IT management software and alerting systems.

How to Install Eaton 9130 UPS

• Plan placement and clearance. Choose a well-ventilated area with adequate clearance for airflow, access to cables, and easy serviceability. Consider rack-mount or floor-standing deployment based on your data center layout and future expansion plans. Ensure the environment stays within the operating temperature and humidity ranges specified by Eaton.
• Prepare power infrastructure. Verify the availability of a dedicated 208V power circuit with a matching L6-20P outlet. Use appropriate circuit protection and ensure grounding complies with local electrical codes. This step minimizes nuisance trips and protects connected devices from electrical faults.
• Connect the UPS to mains. Secure the L6-20P input cord to the UPS input port and connect the other end to your 208V power source. Double-check the connection to ensure a secure, locked fit that won’t loosen during operation or movement.
• Attach and organize loads. Plug critical devices into the APC outlets (the eight C13s and one C19). Group high-priority servers and storage on dedicated circuits to simplify management and improve fault isolation in case of battery deviation or alarm conditions.
• Configure protection and monitoring. Use the onboard LCD interface to set voltage (208V), alarm preferences, and notification methods. If your installation includes a network management card or software, integrate the UPS into your monitoring platform to receive alerts, perform self-tests, and track runtime estimates in real time.
• Optional battery integration and testing. If you’re deploying optional battery modules, install them per the user manual, connect them to the UPS, and perform a controlled self-test to verify runtime and protection performance. Periodically run self-tests to confirm battery health and readiness for contingency scenarios.

Frequently Asked Questions

• Q: What loads can the Eaton 9130 protect?
  A: The 9130 UPS is designed for IT workloads such as servers, storage, virtualization platforms, and network equipment. The unit provides up to 1800 W of real power, which covers the typical protection needs of small to mid-size data centers, edge deployments, and converged infrastructure. Actual runtime depends on the mix of devices connected and the condition of the battery modules.
• Q: What makes ABM technology important?
  A: ABM, or Adaptive Battery Management, optimizes battery performance and longevity. By prioritizing healthy charging cycles and reducing full-discharge stress, ABM helps extend battery life, lowers maintenance costs, and improves reliability for mission-critical uptime.
• Q: How energy-efficient is the Eaton 9130?
  A: The UPS delivers greater than 95% efficiency under typical operating conditions, which minimizes heat output and reduces cooling requirements in data centers or office environments where power protection is essential.
• Q: What outlets and voltages are available?
  A: The output features eight IEC C13 receptacles and one IEC C19 receptacle at 208V, providing flexible power distribution for mixed IT gear, including older equipment that requires C13/C19 configurations.
• Q: Can I extend runtime if my loads grow?
  A: Yes. The Eaton 9130 supports scalable runtimes through optional battery modules. This enables you to adapt to increasing workloads without replacing the UPS, protecting your IT environment during longer outages or maintenance windows.
• Q: How is the unit typically deployed in a data center?
  A: It can be deployed in a rack-mounted or floor-standing configuration depending on space and cabling needs. Its compact footprint, robust input and output options, and clear management interface make it suitable for data centers, server rooms, and edge locations requiring reliable power protection.