Eaton Power Cord for Select Eaton Universal PDUs - 11.5 kVA, 240V, 60A, 10 ft

Ensure reliable, scalable power delivery for Eaton UPDUs with this detachable power cord designed for North American 240V single‑phase installations. Built to support Eaton universal input PDUs (UPDUs), the cord features an 8‑pin universal input connector that mates with Eaton UPDU ports and a wide range of compatible outlets, enabling flexible deployments in data centers, server rooms, and IT closets. With an impressive 11.5 kVA rating and a 60A current capacity, this cord delivers ample headroom for demanding loads, while the 10‑foot length provides generous reach for clean cable management and optimized airflow around critical equipment. The detachable design simplifies maintenance and upgrades—you can replace or reconfigure the connection without disturbing the UPS or PDU itself. This combination of safety, reliability, and adaptability makes it an essential accessory for professionals who demand uptime and operational efficiency from their power infrastructure. Whether you’re wiring a new rack, upgrading an existing UPDU setup, or planning future scalability, this power cord helps you maintain a tidy, safe, and high‑performing power distribution environment.

• Detachable design enables quick maintenance and straightforward upgrades. You can swap the cord without disconnecting the UPDU from servers or other equipment, reducing downtime and simplifying spare parts management.
• 8‑pin universal input connector provides broad compatibility with Eaton UPDUs and a variety of compatible outlets. This flexible interface supports consistent, reliable connections across different data center layouts.
• High power capacity with an 11.5 kVA (11500 VA) rating and 60A current capability. This ensures the UPDU and connected devices have sufficient headroom during peak loads and power events, helping to protect critical equipment from voltage sag or outages.
• 10 ft (3.05 m) cord length offers ample slack for tidy cable routing, unobstructed airflow, and simplified rack organization. The longer reach helps minimize stress on plugs and reduces clutter in densely populated racks.
• North American 240V single‑phase design tailored for U.S. and Canadian installations. The robust construction and configuration are optimized for business‑critical environments where uptime and reliability matter most.

Technical Details of Eaton Power Cord for Select Eaton Universal PDUs

• Power rating: 11.5 kVA (11500 VA) maximum
• Current rating: 60 A
• Voltage: 240 V AC, single‑phase
• Cord length: 10 ft (3.05 m)
• Connector: 8‑pin universal input compatible with Eaton UPDU ports (360P6W interface)
• Compatibility: Eaton universal input PDUs (UPDU) and compatible North American outlets
• Detachable: removable power cord assembly for easy replacement and maintenance

How to install Eaton Power Cord for Select Eaton Universal PDUs

• Power down all equipment connected to the UPDU and unplug from the power source before handling the cord to ensure personal safety and protect connected devices.
• Detach any existing cord from the UPDU input if you are replacing an older cable, then inspect the UPDU input port for signs of wear or damage before proceeding.
• Inspect the 8‑pin universal connector on the cord and the UPDU input receptacle to confirm clean pins and proper alignment, preventing bent pins or poor contact.
• Align the 8‑pin universal plug with the UPDU input port, insert firmly, and ensure the connector is fully seated and secure to prevent accidental disconnections during operation.
• Route the cord for safe, neat cable management: avoid tight bends, keep the path clear of heat sources, and maintain clear airflow around racks and cooling vents. Use cable ties or management channels as needed.
• Connect the opposite end of the cord to a compatible North American 240V outlet rated for at least 60A, ensuring the outlet and circuit can handle the load. If needed, secure strain relief to prevent movement or stress on the connector.
• Power on the equipment and verify that the UPDU and connected devices initialize normally. Check status indicators on the UPDU and confirm that monitored loads and protections respond correctly to the power input.

Frequently asked questions

• What is the length of this power cord? Answer: 10 ft (3.05 m).
• What voltage and phase is the cord designed for? Answer: 240V single‑phase, designed for North American installations.
• What connector does it use? Answer: An 8‑pin universal input connector compatible with Eaton UPDUs (360P6W interface).
• What is the maximum power rating and current? Answer: Up to 11.5 kVA (11,500 VA) and 60 A at 240 V.
• Is this cord detachable? Answer: Yes, it is a detachable power cord intended for easy replacement and UPDU maintenance.
• Which equipment is compatible? Answer: Eaton universal input PDUs (UPDUs) that utilize the 8‑pin universal input interface.