Eaton Tripp Lite Series 1-Port Industrial USB over Cat6 Extender, ESD Protection, PoC - USB 2.0, Mountable, 330 ft., TAA

Discover a rugged, industrial-grade solution that brings USB content to where you need it most without sacrificing performance or reliability. The Eaton Tripp Lite Series 1-Port Industrial USB over Cat6 Extender is engineered for demanding environments, delivering seamless USB 2.0 connectivity through standard Cat6/6a Ethernet cabling up to 330 feet away. Its heavy-duty all-metal housing, PoC (Power over Cable) support, and ESD protection make it ideal for manufacturing floors, control rooms, warehouses, or any setup that requires a durable USB extension beyond the desk or rack. Whether you’re printing from a distant printer, streaming a 1080p webcam, or accessing an external drive from across the room, this extender provides a straightforward, plug-and-play experience with enterprise-grade protection and reliability.

• Industrial-grade design features a rugged, all-metal housing built to withstand harsh environments, with secure mounting options for wall, rack, or bench installation.
• USB 2.0 high-speed performance supports common USB peripherals, including printers, webcams, external hard drives, keyboards, mice, and more, while maintaining compatibility with legacy devices.
• Long-distance USB over Cat6 delivers reliable USB connectivity up to 330 ft (100 m) over Cat6 or Cat6a Ethernet cable, enabling flexible device placement from the host computer.
• Power over Cable (PoC) support allows powering compatible USB devices through the Cat6 link, reducing cable clutter and eliminating the need for an extra power supply in many installations.
• Plug-and-play with built-in protections offers driver-free setup and robust electrostatic discharge (ESD) protection, along with TAA compliance for procurement in government and enterprise environments.

Technical Details of Eaton Tripp Lite Series 1-Port Industrial USB over Cat6 Extender

• USB standard: USB 2.0 High Speed (480 Mbps) interface for broad compatibility with USB-A devices.
• Maximum distance: Up to 330 ft (100 m) when used with Cat6/6a cable between transmitter and receiver units.
• Cable requirements: Cat6 or Cat6a Ethernet cable required to connect extender units; designed for reliable data transmission over long runs.
• Housing and mounting: Industrial-grade heavy-metal enclosure with mounting options suitable for wall, rack, or bench setups.
• Power delivery: PoC (Power over Cable) capability to supply power to compatible USB devices through the Cat6 link when applicable.
• Compliance and protection: TAA-compliant device with built-in ESD protection to guard against electrostatic discharge and enhance longevity.
• Kit composition: Extender kit designed for two-way USB extension, typically including transmitter and receiver units and necessary interconnects (cat6 cable between units).

How to install Eaton Tripp Lite Series 1-Port Industrial USB over Cat6 Extender

1. Begin by identifying a suitable location for the transmitter unit near the host computer’s USB-A port. Position it so the USB cable to the host remains short and unobstructed.

2. Connect a standard USB-A cable from the computer’s USB port to the transmitter’s USB input. Ensure a snug connection to prevent any intermittent contact.

3. Run a Cat6 Ethernet cable from the transmitter to the receiver unit. Use cable that is rated for the installation environment, and avoid sharp bends or heavy congestion along the run.

4. On the remote end, connect your USB device (printer, webcam, external drive, etc.) to the receiver’s USB port using a standard USB-A cable. Make sure the device is supported by USB 2.0 and within the device’s power requirements.

5. If your setup supports PoC, verify that the power-over-cable configuration is enabled and that the remote device receives adequate power through the Cat6 link. If a separate power supply is required for the USB device, connect it per the extender’s guidance, ensuring all connections are secure and protected from dust or moisture.

6. Power on both units (if applicable) and test the USB device from the host computer. The device should enumerate normally without the need for additional drivers. If it does not, re-check all connections, the Cat6 cable integrity, and ensure the device itself is functioning correctly.

7. For permanent installations, use the built-in mounting provisions to secure the transmitter and receiver units in their final positions. This helps maintain a clean setup and reduces the risk of accidental disconnections.

Frequently asked questions

Q: What is the maximum distance supported by this extender?

A: The system supports USB extension across Cat6/6a cables up to 330 ft (100 m) between the transmitter and receiver units, enabling flexible placements away from the host computer.

Q: Is this extender compatible with USB 3.0 devices?

A: This extender is designed for USB 2.0, which covers the vast majority of peripherals such as printers, webcams, and external drives. USB 3.0 devices may function at USB 2.0 speeds or may require a USB 3.0-compatible extender. Always verify device compatibility for your specific use case.

Q: Does it require drivers?

A: No drivers are required. The extender is designed for plug-and-play operation and works with standard USB peripherals without additional software in most standard Windows, macOS, and Linux environments.

Q: What if I need to power a high-draw USB device remotely?

A: The extender supports Power over Cable (PoC) for powering compatible USB devices through the Cat6 link. If your device requires more power than PoC can supply, you may need an auxiliary local power source attached to the remote unit according to the installation guidelines.

Q: Is this product compliant with procurement standards?

A: Yes, the unit is TAA compliant, making it suitable for government and enterprise purchasing. It is built to endure industrial environments and provides ESD protection for sensitive electronics.

Q: Can I mount the extender on a wall or in a server rack?

A: Absolutely. The rugged, industrial-grade all-metal housing is designed for wall, rack, or bench mounting to fit a wide range of installation requirements.

Q: What peripherals work best with this extender?

A: The extender is optimized for USB-A devices such as printers, 1080p webcams, external USB hard drives, keyboards, mice, scanners, and other USB peripherals that operate under USB 2.0 specifications. For devices requiring higher power or bandwidth, consider PoC configurations and verify compatibility with the specific device.