Eaton Tripp Lite Series 5.7kW 3-Phase Local Metered PDU

The Eaton Tripp Lite Series 5.7kW 3-Phase Local Metered PDU is the essential power distribution solution for data centers, server rooms, and edge environments where efficiency, visibility, and reliability matter most. Engineered to handle demanding workloads in modern IT infrastructures, this 0U vertical PDU delivers precise energy monitoring, robust protection, and a versatile outlet mix to support a wide range of devices—from high-density servers to networking gear. With a compact footprint that fits standard 19" racks, it streamlines installation while providing real-time power data to help you optimize cooling, capacity planning, and overall data center efficiency. Built for rugged performance and long-term reliability, this PDU is a smart, scalable choice for organizations seeking better control over their electric use and infrastructure costs.

• High-density power distribution for growing IT workloads: The 5.7 kW capacity enables you to run multiple servers, storage devices, and network gear from a single, centralized power module. This high-density distribution supports scalable data center setups while reducing clutter and simplifying management in busy rack environments.
• Versatile outlet configuration to fit diverse equipment: Features 21 x 5-15/20R outlets and 6 x L6-20R locking outlets, giving you ready-made options for both standard consumer/server gear and high-current equipment. The 208/120V distribution matches common data center power rails, reducing the need for multiple adapters or power strips.
• 3-phase, 208/120V operation for balanced loads: Designed to distribute power evenly across three hot legs, helping to balance loads across servers, switches, and storage devices. This arrangement minimizes voltage drop and improves overall efficiency, especially in dense rack deployments.
• Local metering for real-time energy visibility: Built-in metering provides immediate insight into current draw, voltage, watts, and power factor. This visibility supports proactive capacity planning, proactive maintenance, and smarter cooling strategies that can lower operating costs and extend equipment life.
• 0U vertical rack-mount design for space-efficient deployments: Engineered to mount in a standard 19" rack without occupying any rack units (0U), maximizing your available space. The compact form factor is ideal for data centers, server rooms, and edge locations where space is at a premium, while maintaining a clean and organized rack layout.

Technical Details of Eaton Tripp Lite Series 5.7kW 3-Phase Local Metered PDU

• Power rating: 5.7 kW
• Phase: 3-Phase
• Input: L21-20P, 6 ft (1.83 m) cord
• Outlets: 21 x 5-15/20R, 6 x L6-20R
• Voltage: 208/120V AC
• Mounting: 0U vertical rack-mount (fits standard 19" racks)
• Local metering: built-in power monitoring for real-time usage data
• Compliance: TAA (Trade Agreements Act) compliant

How to install Eaton Tripp Lite Series 5.7kW 3-Phase Local Metered PDU

Installing this PDU is straightforward for technicians familiar with 19" rack layouts. Follow these general steps to ensure a safe and reliable setup that maximizes performance and monitoring capabilities.

• Plan placement in a compatible 19" rack and confirm there is adequate clearance for airflow and cable routing. Verify that the rack and mounting hardware are rated for 0U vertical installation and can support the weight of the PDU and connected devices.
• Power down the equipment in the rack area and ensure the main power source supply is isolated before making any connections to the PDU. This minimizes the risk of electric shock or equipment damage during installation.
• Mount the PDU in the rack in a 0U vertical orientation using standard rail kits or mounting hardware compatible with your enclosure. Align mounting holes, secure the unit firmly, and ensure there is no bowing or movement that could compromise connections.
• Connect the incoming power using the L21-20P plug to a dedicated 208/120V power circuit. Make sure all connections are tight and that the circuit is rated to handle the PDU’s load. Route the 6 ft cord neatly to avoid interference with fans or doors.
• Arrange devices on the 21 x 5-15/20R and 6 x L6-20R outlets, label circuits for easy identification, and verify load balance across the three phases. Power on the rack and confirm that the local meter registers correctly and that individual outlets are supplying power to connected equipment.

Frequently asked questions

• Q: What is the power capacity of the Eaton Tripp Lite Series 5.7kW Local Metered PDU?
  A: It is rated for up to 5.7 kW of total power distribution, suitable for multi-device racks and dense IT deployments.
• Q: How many outlets are included and what types are they?
  A: The PDU provides 21 outlets of 5-15/20R and 6 locking L6-20R outlets, enabling connection to a mix of standard servers and higher-current equipment.
• Q: What is the input plug and cord length?
  A: The unit uses an L21-20P input connector with a 6 ft (1.83 m) cord, suited for 208/120V power distribution in data centers.
• Q: Is this PDU compatible with 3-phase power systems?
  A: Yes. It is specifically designed for 3-phase, 208/120V environments to balance loads and improve efficiency in multi-phase racks.
• Q: What does local metering provide?
  A: Local metering delivers real-time electrical measurements (such as current, voltage, watts, and power factor) directly from the PDU, enabling closer monitoring and energy optimization at the rack level.
• Q: Is the PDU 0U and rack-mountable?A: Yes. It is a 0U vertical PDU designed to mount in standard 19" racks, preserving space while delivering full power distribution capabilities.