Eaton Tripp Lite Series Cisco-Compatible QSFP-100G-SR4-S QSFP28 Transceiver – 100GBase-SR4, 850 nm, 100 m

The Eaton Tripp Lite Series Cisco-Compatible QSFP-100G-SR4-S QSFP28 Transceiver is engineered to deliver ultra-fast, reliable 100G connectivity for data centers and enterprise networks. Specifically designed to integrate with Cisco ecosystems, this pluggable QSFP28 transceiver provides high-density uplinks through four parallel 25 Gbps lanes, enabling scalable bandwidth for cloud services, virtualization, AI workloads, and large-scale storage platforms. With 100GBase-SR4 optics operating at 850 nm and a multimode MTP/MPO interface, you get dependable performance over short-reach links that connect servers, switches, and fabric interconnects within racks and across close-proximity data center spaces. The transceiver supports link lengths up to 100 meters on OM3/OM4 multimode fiber, making it a cost-efficient, easy-to-deploy solution for campus-to-data-center interconnects and high-capacity intra-data center fabrics.

• High-performance 100GBASE-SR4 with four parallel lanes delivering a total 100 Gbps over multimode fiber for dense, scalable data center networks.
• Cisco-compatible QSFP28 form factor enables seamless integration with Cisco switches and routers that support QSFP28, reducing deployment friction and maintaining network standards.
• 850 nm VCSEL technology optimized for multimode fiber, providing reliable short-reach transmission with excellent optical efficiency and low power consumption.
• Multimode MTP/MPO interface supports 12-fiber connectors, simplifying high-density fiber routing and patching in data centers and campus deployments.
• Up to 100 meters on OM3/OM4 fiber for flexible layouts, enabling efficient interconnects between top-of-rack, aggregation, and core networking tiers without expensive single-mode deployments.

Technical Details of Eaton Tripp Lite Series Cisco-Compatible QSFP-100G-SR4-S QSFP28 Transceiver

• Technology: 100GBASE-SR4 optics for multimode fiber
• Form Factor: QSFP28 pluggable transceiver
• Wavelength: 850 nm VCSELs
• Fiber Interface: Multimode MTP/MPO connector (12-fiber interface)
• Distance: Up to 100 meters on OM3/OM4 multimode fiber
• Compatibility: Cisco-compatible transceiver compatible with supported Cisco switches androuters
• Applications: High-density data center uplinks, cloud and virtualization environments, storage networks, and campus interconnects requiring 100G performance

How to install Eaton Tripp Lite Series Cisco-Compatible QSFP-100G-SR4-S QSFP28 Transceiver

• Power down or ensure hot-swappable capability in accordance with your Cisco switch or router's maintenance guidelines, then locate an available QSFP28 port.
• Remove the existing module from the QSFP28 slot with care, or prepare the slot if a replacement is required, ensuring no dust or debris enters the port.
• Insert the QSFP28 transceiver firmly into the slot until you hear or feel a click indicating proper seating and engagement with the electrical contacts.
• Connect the multimode MTP/MPO fiber cable to the transceiver using an appropriate OM3/OM4 duplex MPO-to-MPO patch cord or patch panel, aligning fiber colors and lanes as required by your network design.
• Route fibers to the corresponding switch fabric or patch panel, secure cables to prevent movement, and power on the device. Verify link integrity via the device’s LED indicators or management interface, then perform a basic throughput test to confirm 100G performance across all four lanes.
• If the link does not establish, verify fiber type (OM3/OM4), connector cleanliness, patch cord quality, and compatibility with the host device’s software/firmware; consult your network administrator for any required device-specific compatibility lists.

Frequently asked questions

• Q: Is this transceiver Cisco-compatible?
  A: Yes. It is designed for Cisco-compatible QSFP28 ports and typically integrates with Cisco switches and routers that support 100G SR4 optics, enabling a seamless fit within Cisco-based networks.
• Q: What is the data rate and protocol?
  A: The transceiver supports 100GBASE-SR4 with four parallel lanes delivering 100 Gbps over multimode fiber, suitable for short-reach data center uplinks and interconnects.
• Q: What type of fiber and connector does it use?
  A: It uses multimode fiber (OM3/OM4) with an MTP/MPO connector (12-fiber interface) for high-density fiber connectivity.
• Q: What is the maximum link length?
  A: Up to 100 meters on OM3/OM4 multimode fiber, making it ideal for data center racks, ToR, and campus-scale deployments.
• Q: Is installation hot-swappable?
  A: Yes. The transceiver is designed for hot-swappable installation in compatible QSFP28 ports, minimizing downtime during upgrades or migrations.
• Q: Are there special firmware requirements?
  A: Always verify compatibility with your switch model and firmware version; consult your vendor’s interoperability guides to ensure full support for 100G SR4 optics in your specific hardware revision.