Eaton Tripp Lite Series Gigabit PoE/PoE+ Extender – Water Resistant, IP65, 30W, 1 Port

The Eaton Tripp Lite Series Gigabit Ethernet PoE/PoE+ Extender is a rugged, reliable solution designed to extend Power over Ethernet connections beyond typical reach, without sacrificing performance or security. Built for both indoor and outdoor deployments, this 1-port extender combines Gigabit Ethernet speed with PoE and PoE+ capabilities, delivering up to 30W of power to IP cameras, wireless access points, network sensors, and other PoE-enabled devices. Its IP65-rated, weatherproof enclosure makes it ideal for harsh environments, stormy weather, and remote installation sites where dependable connectivity is critical. Whether you’re upgrading a campus, expanding an outdoor surveillance network, or simply extending a power-delivery point in a warehouse or facility yard, this extender provides a compact, easy-to-install solution that harmonizes with Cat5e/6/6a cabling and existing PoE infrastructure.

• Rugged IP65 weatherproof enclosure for outdoor and indoor use. Designed to withstand dust, water exposure, and harsh conditions, ensuring reliable operation in exposed locations or weather-prone environments.
• Single-port PoE/PoE+ extension with up to 30W power budget. Supports IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) power standards to energize compatible devices over a single Ethernet run.
• Gigabit Ethernet performance over Cat5e/6/6a cabling. Delivers full 1 Gbps data speeds with compatibility across commonly used Ethernet cables, enabling high-bandwidth devices to operate at their full potential.
• Versatile 1-port design for flexible deployments. Ideal for powering and extending a single high-demand device such as a security camera, access point, or sensor at a distance from the PoE source.
• Indoor/outdoor readiness with robust construction. Engineered for reliable operation in both controlled interiors and outdoor environments, minimizing maintenance and downtime in critical networks.

Technical Details of Eaton Tripp Lite Series Gigabit PoE/PoE+ Extender

• Ports: 1 Ethernet port designed to deliver PoE/PoE+ power and data to a connected device
• Power budget: Up to 30W available for PoE-enabled devices on the output
• PoE standards supported: IEEE 802.3af (PoE) and IEEE 802.3at (PoE+)
• Cable compatibility: Works with Cat5e, Cat6, and Cat6a cabling to support Gigabit performance
• Speed and performance: Gigabit Ethernet throughput for high-bandwidth devices
• Enclosure rating: IP65-rated for water and dust resistance, suitable for outdoor installations

How to install Eaton Tripp Lite Series Gigabit PoE/PoE+ Extender

Installing the Eaton Tripp Lite PoE/PoE+ Extender is straightforward and can be completed with minimal tools or professional assistance. Follow these practical steps to deploy quickly and confidently while maximizing performance and reliability:

• Verify compatibility: Ensure your PoE switch or injector supports IEEE 802.3af/at and provides sufficient power up to 30W for the device connected to the extender’s output.
• Choose a mounting location: Select an accessible area that preserves the IP65 protection strategy, keeping the enclosure dry and shielded from direct water exposure when possible. For outdoor installations, mount the unit in a sheltered area or use a weatherproof mounting surface.
• Connect the input run: Run a Cat5e/6/6a cable from the PoE source (switch or injector) to the extender’s input connector. Use proper strain relief and secure connections to prevent moisture ingress and physical damage.
• Connect the output device: Run a second Cat5e/6/6a cable from the extender’s output to the PoE-powered device (for example, an IP camera or wireless access point). Ensure cables are routed away from potential water exposure and protected from impact where possible.
• Power up and test: Power on the PoE source and verify that the connected device powers up and maintains a stable network connection. Check for indicator LEDs if present and validate device operation under typical operating conditions.

For optimal performance, use high-quality Cat5e/6/6a cables and ensure the installation adheres to local electrical and building codes. The extender’s rugged construction and IP65 rating help protect against rain, dust, and temperature fluctuations, enabling reliable operation in demanding environments. The combination of a single PoE/PoE+ port and Gigabit Ethernet capability makes this extender a practical choice for delivering robust power and data to remote devices without creating clutter or requiring multiple power outlets.

Frequently asked questions

• Q: What devices can I power with this extender? A: The extender is designed to power PoE/PoE+ devices such as IP cameras, wireless access points, and network sensors that require up to 30W of power per device. It is ideal for remote cameras, outdoor APs, and other single-device PoE deployments where cable length or environmental exposure is a concern.
• Q: What is the IP rating and why does it matter? A: The enclosure is IP65 rated, meaning it is protected against dust ingress and water jets from any direction. This makes it suitable for outdoor use in rain, dust, and harsh environments, reducing maintenance and downtime.
• Q: What cabling works with this extender? A: The extender supports Cat5e, Cat6, and Cat6a cables, enabling flexible installation across standard Ethernet fiber blends and ensuring compatibility with most modern networks while preserving Gigabit performance.
• Q: Is indoor use also supported? A: Yes. While the IP65 rating targets outdoor durability, the device is designed for reliable operation in both indoor and outdoor environments, providing versatility for facility interiors, server rooms, and outdoor campuses alike.
• Q: How does the power budget affect device choices? A: The extender provides up to 30W of PoE power on the output. When selecting devices, ensure their PoE consumption does not exceed this budget, factoring in any headroom for startup surge and device behavior to maintain stable operation.