Eaton Tripp Lite Series HDMI over Cat5/6 Extender: Box-Style Remote Repeater, Up to 125 ft (38 m) - TAA Compliant

Enhance your professional AV setup with the Eaton Tripp Lite B126-110 remote repeater, a compact, box-style accessory that extends HDMI over Cat5/6 networks. This remote repeater is designed to work seamlessly with the Tripp Lite B126-Series HDMI over Cat5 systems, enabling longer cable runs and the addition of extra displays without sacrificing picture quality. Built for reliability in commercial environments, the B126-110 helps you scale your installation—from conference rooms and classrooms to digital signage and command centers—while maintaining crisp color and dependable performance. When paired with high-quality Cat5e/6 cabling, you can achieve maximum distance and consistent resolution across multiple monitors, making it the ideal solution for professional AV deployments that demand clarity, flexibility, and easy integration. This model is TAA-compliant, ensuring it meets government procurement standards, and is designed for use in a wide range of professional applications where robust HDMI distribution over Cat5/6 is required.

• Extends HDMI over Cat5/6: The B126-110 remote repeater adds extension distance within Tripp Lite’s B126-Series installation, enabling longer runs and easier multi-monitor deployments without degrading signal quality.
• Box-style, compact remote repeater: A compact, rack-friendly form factor that integrates neatly into existing AV racks and installations, keeping cables organized while expanding capability.
• Supports 24-bit True Color with solid wiring guidance: For maximum distance and color fidelity, use 24 AWG solid-wire Cat5e/6 cables (as recommended by Tripp Lite’s N202-Series) to preserve image integrity across longer runs.
• Compatibility and compliance: Specifically designed to work with the Tripp Lite B126-Series HDMI over Cat5 installations and is TAA-compliant, suitable for federal and commercial procurement.
• Versatile for multi-display setups: Ideal for expanding an HDMI distribution network to additional monitors, enabling synchronized video and audio across multiple screens with minimal latency.

Technical Details of Eaton Tripp Lite Series HDMI over Cat5/6 Extender

• Model: B126-110 remote repeater unit for B126-Series HDMI over Cat5 installations
• Function: Remote repeater to increase extension distance and/or add extra monitors within a Cat5e/6 HDMI distribution
• Cable guidance: Encourages use of 24 AWG Solid Wire Cat5e/6 cable (Tripp Lite’s N202-Series) to achieve maximum distance and resolution
• Supported signaling: HDMI over Cat5/6 extension with 24-bit color depth
• Compliance: TAA-compliant for government procurement

How to install Eaton Tripp Lite HDMI over Cat5/6 Extender

• Plan your layout: Verify compatibility with your existing B126-Series installation and determine optimal locations for the transmitter, receiver, and remote repeater.
• Power down equipment: Ensure all devices in the HDMI over Cat5/6 chain are powered off before making connections to prevent damage.
• Connect the repeater to the installation: Integrate the B126-110 remote repeater into the existing B126-Series network according to the manufacturer’s guidelines, placing the repeater at a point that optimizes distance and display coverage.
• Run the correct cable: Use 24 AWG solid-wire Cat5e/6 cables to connect between the transmitter, repeater, and remote displays. Keep cable runs as clean and as direct as possible to preserve signal quality.
• Test and verify: Power on the system, verify HDMI integrity, and check video and audio across all connected displays. If needed, adjust cable routing or repeater placement to optimize resolution and synchronization.

Frequently asked questions

• Q: What is the maximum extension distance when using the B126-110 repeater? A: The extender supports up to 125 ft (38 m) via Cat5e/6 using 24 AWG solid-wire cables for optimal distance and 24-bit color performance.
• Q: Which cables should I use for best results? A: Use 24 AWG solid-wire Cat5e/6 cables, in line with Tripp Lite’s recommendations for the N202-Series, to maximize distance and maintain signal quality.
• Q: Is this repeater compatible with all B126-Series configurations? A: The B126-110 is designed to be added to Tripp Lite B126-Series HDMI over Cat5 installations to extend reach and/or support additional monitors; verify your specific kit’s compatibility with the remote repeater.
• Q: Is the product compliant with procurement standards? A: Yes, the unit is TAA-compliant, meeting Trade Agreement Act requirements for government and commercial purchases.