Eaton Tripp Lite Series SmartOnline 1000VA 900W 120V Double-Conversion UPS — 8 Outlets, Extended Run, Network Card Included

The Eaton Tripp Lite Series SmartOnline 1000VA 900W 120V Double-Conversion UPS is engineered for reliability where power is mission-critical. In environments such as data centers, server rooms, networking closets, and desktop IT suites, this online UPS delivers clean, continuous power to protect sensitive equipment from outages, surges, sags, and electro-magnetic interference. With a robust 1000 VA / 900 W rating, eight outlets, an LCD interface, and comprehensive management options (USB, DB9, and an included network card), it provides seamless protection, intelligent monitoring, and flexible deployment as a 2U rack or tower unit. Designed to maintain uptime, it becomes the backbone of a resilient IT infrastructure, ensuring data integrity and uninterrupted operation even during power disturbances.

• Online double-conversion technology: delivers continuous, clean power to connected equipment, isolating loads from utility fluctuations for improved reliability and data integrity.
• Power capacity and outlets: 1000 VA / 900 W with 8 protected outlets capable of supporting critical servers, storage devices, and network gear.
• Extended Run capability: built to provide extended runtime options, allowing you to add battery packs or configure longer backup periods to match workload demands.
• Comprehensive management: LCD display for local status, plus USB and DB9 serial ports, and an included network card for remote monitoring and centralized administration.
• Flexible deployment: 2U rack/tower form factor enables easy integration into existing racks or secure desktop setups, with scalable protection for expanding infrastructure.

Technical Details of Eaton Tripp Lite Series SmartOnline 1000VA 900W 120V Double-Conversion UPS

• Model: Eaton Tripp Lite SmartOnline 1000VA 900W 120V Double-Conversion UPS
• Topology: Online double-conversion UPS to maintain continuous output independence from input power fluctuations
• Input/Output: 120V nominal input and 120V output with stable voltage regulation
• Power rating: 1000 VA / 900 W
• Outlets: 8 total protected outlets for server, storage, network, and peripheral devices
• Form factor: 2U rack/tower capable for flexible installation in racks or on a stable surface
• Battery/run capability: Extended Run support to extend runtime with additional battery packs or configurations
• Management interfaces: LCD display for local monitoring; USB and DB9 serial ports; Network Card included for remote management and alerting

how to install Eaton Tripp Lite Series SmartOnline 1000VA 900W 120V Double-Conversion UPS

1. Choose installation location: select a well-ventilated, stable area near the equipment you intend to protect. If mounting in a rack, ensure there is enough clearance for ventilation and maintenance access.
2. Mounting the unit: for rack deployment, secure the UPS in a 2U space according to your rack’s mounting rails. If using as a tower, place the unit on a solid, level surface with adequate airflow around all sides.
3. Connect the load: plug critical devices—servers, storage, networking gear—into the UPS outlets. Avoid overloading any single outlet circuit and distribute devices to balance power draw.
4. Connect to power and network: plug the UPS into a grounded utility outlet using the included power cord. Attach the Network Card to enable remote monitoring, and connect USB and/or DB9 ports to management computers as needed.
5. Configure and test: power on the UPS and use the LCD to configure basic settings (voltage sensitivity, audible alerts, notification options). Run a self-test through the LCD menu to verify battery health and runtime estimates. Confirm that protected devices respond immediately to power events and that management software receives proper status updates.
6. Plan for maintenance and upgrades: document the installation, set firmware or software updates as they become available, and schedule periodic battery health checks to maintain the expected runtime and protection levels.

Frequently asked questions

• Q: What is the power capacity of this UPS?

  A: It is rated at 1000 VA and 900 W, suitable for protecting a small to mid-sized group of critical devices in a server room or network closet.

• Q: How many outlets does it have and what kind of protection do they provide?

  A: It has 8 outlets that protect connected equipment from power disturbances, with the protection aligned to the unit's online double-conversion core.

• Q: Does this UPS include remote management capabilities?

  A: Yes. It includes a network card for remote monitoring, along with USB and DB9 serial ports for local management and integration with existing IT management platforms.

• Q: Can I extend the runtime beyond the built-in capabilities?

  A: The unit supports Extended Run configurations, allowing you to add battery packs to increase runtime to meet longer backup needs.

• Q: What mounting options are available?

  A: The UPS is a 2U rack/tower unit, designed to integrate into standard server racks or be deployed on a stable surface as a tower.