Eaton Tripp Lite SmartPro 1500VA UPS — 208/230V Line-Interactive Sine Wave, 8 Outlets, LCD Display

The Eaton Tripp Lite SmartPro 1500VA UPS is a high-performance power protection solution designed for demanding IT environments. Built to safeguard servers, networking gear, and critical workstations, this 1500VA, 1500W unit delivers clean, reliable sine-wave output at 208/230V, ensuring uninterrupted operation during power fluctuations and outages. With its flexible 2U rack/tower form factor, intuitive LCD interface, and scalable runtime options, the SmartPro series is engineered to maximize uptime while simplifying management for IT administrators and service professionals alike.

• Reliable sine-wave power for sensitive equipment: This unit provides true sine-wave output and robust voltage regulation to protect delicate servers, switches, storage devices, and other critical components from brownouts, surges, and momentary outages.
• 208/230V operation with line-interactive design: Optimized for modern data centers and network closets, the UPS maintains stable output across fluctuating mains, reducing wear on connected equipment and external power supplies.
• Eight outlets for comprehensive protection: A generous set of eight protected receptacles enables you to consolidate protection for essential devices, with room to expand connections as the system grows.
• Management options for local and remote control: It features a convenient LCD display along with USB and DB9 (serial) connections, plus an optional network management card to enable remote monitoring and controlled shutdowns in complex environments.
• Extended runtime and flexible deployment: Designed for rack or tower installation, the SmartPro 1500VA supports extended runtime through optional battery packs, allowing longer uninterruptible operation during extended outages or maintenance windows.

Technical Details of Eaton Tripp Lite SmartPro 1500VA

• Power capacity: 1500 VA / 1500 W, providing ample headroom for mid-range servers, networking gear, and critical workstations.
• Topology: Line-Interactive Sine Wave UPS, delivering clean, regulated AC power with automatic voltage regulation to correct mild power fluctuations without resorting to battery discharge.
• Input/output voltage: Designed for 208/230 VAC operation to match common data center power standards and to minimize transformer losses in higher-voltage environments.
• Form factor: 2U rack/tower convertible, enabling quick deployment in racks or on flat surfaces to suit existing infrastructure.
• Outlets: 8 protected outlets to safeguard multiple devices and provide centralized power protection for critical equipment.
• Display and interfaces: LCD status display for real-time monitoring of input voltage, output voltage, load level, battery status, and event history; USB and DB9 serial connections for local management and integration with existing management software.
• Networking: Optional network management card allows remote monitoring, SNMP integration, and centralized control for larger deployments or data centers.
• Extended Run: Supports extended runtime with external battery packs, enabling longer periods of operation during extended outages or planned maintenance.
• Protection features: Built-in surge protection, automated shutdown capabilities, and battery-backed protection to maintain uptime during a power disturbance pulse or outage.
• Compatibility and certification: Designed to integrate with common IT environments and management workflows, with compatibility considerations for industry-standard servers and networking equipment.

How to Install Eaton Tripp Lite SmartPro 1500VA

• Determine whether you will mount the unit in a rack or place it on a stable surface as a tower. Ensure adequate clearance for ventilation and access to the LCD display for monitoring and configuration.
• Place the UPS near your rack or workstation, then connect your critical devices to the eight protected outlets. Keep the UPS within reach of the power source and away from sources of heat or moisture.
• Plug the UPS into a properly grounded AC outlet rated for the unit’s input requirements (208/230 VAC). Avoid using power strips or extension cords upstream of the UPS, as these can compromise protection and performance.
• Power on the UPS and use the LCD display to verify input voltage, load, battery status, and estimated runtime. Perform a controlled self-test to confirm proper operation and to validate battery health.
• If you require centralized monitoring, install the optional network management card and connect the UPS to your network. For local control, ensure the USB and DB9 connections are wired to the server or management workstation as needed.
• Schedule periodic battery health checks and firmware updates if available. Maintain a record of replacement battery timelines to avoid unexpected downtime.
• Follow all local electrical codes and safety guidelines when installing and configuring the UPS. Do not block ventilation grilles and never service the unit with the power connected.

Frequently asked questions

• What is the capacity of the SmartPro 1500VA UPS? It delivers 1500 VA and 1500 W of backup power, suitable for protecting a mix of servers, switches, storage, and workstations in small to midsize deployments.
• Does it support extended runtime? Yes. The SmartPro series is designed for extended run scenarios when used with optional external battery packs, enabling longer outages to be managed without disconnecting critical services.
• What management options are available? The UPS includes an LCD display and both USB and DB9 serial ports for local management. An optional network management card enables remote monitoring and integration with SNMP-based management systems.
• Can I rack-mount this unit? Yes. The SmartPro 1500VA is a 2U rack/tower design, allowing installation in standard equipment racks or placing it on a flat surface with stable support.
• What kind of outlets are included? The unit provides eight protected outlets for powering essential devices. Specific outlet configurations (surge-only vs. battery-backed) vary by model; refer to the product’s specification sheet for exact details.
• Is the input voltage limited to 208/230V? The unit is designed to operate at 208/230 VAC, aligning with common enterprise electrical standards and enabling efficient operation in data centers and network closets.