Eaton Tripp Lite Series SmartRack 15U Low-Profile Wall-Mount Half-Height Rack Enclosure, Hinged Back

The Eaton Tripp Lite Series SmartRack 15U Low-Profile Wall-Mount Half-Height Rack Enclosure with Hinged Back is engineered to maximize space efficiency without sacrificing performance. Designed for busy offices, data closets, and small data centers, this enclosure provides a secure, accessible home for your network gear while keeping cables organized, airflow optimized, and equipment readily serviceable. With a slim, low-profile footprint and switch-depth interior, it allows you to deploy standard 19-inch equipment—such as switches, patch panels, and small UPS units—directly where you need them, reducing clutter and improving reliability. This enclosure blends durability with practicality, delivering the protection, accessibility, and scalability you demand from a compact, wall-mounted network rack.

• 15U capacity with standard 19-inch mounting rails: The enclosure provides ample mounting space for essential networking gear, including multi-port switches, patch panels, and compact servers, while maintaining a compact wall-mount footprint. The 15U height is ideal for optimizing vertical space in restricted rooms and closets, enabling clean, professional installations that meet evolving network needs.
• Switch-depth design for streamlined cabling: Specifically engineered to accommodate switch-depth equipment, this SmartRack enclosure supports front-accessable gear with efficient rear cable routing. The design minimizes the depth required to manage cables from front to rear, helping improve airflow and reduce tangling, so you can organize cables neatly and access ports without removing devices.
• Low-profile, half-height wall-mount form factor: Perfect for offices, retail backrooms, and edge environments, the half-height profile sits close to the wall, leaving more usable floor space. This configuration is especially advantageous when ceiling height or space is at a premium, enabling you to deploy critical equipment without the bulk of full-height enclosures.
• Hinged back for rapid service and cabling optimization: The hinged-back design provides convenient rear access for quick wiring changes, component swaps, and routine maintenance. With easy-release panels and a front door that remains secure, technicians can perform installations and upgrades without moving the enclosure from its mounted position.
• Durable construction with secure enclosure features: Built from robust steel with a durable powder-coated finish, this SmartRack enclosure delivers long-lasting protection against everyday wear and environmental factors. It combines secure front-door access with serviceable rear panels, simplifying maintenance while maintaining security in shared spaces.

Technical Details of Eaton Tripp Lite Series SmartRack 15U Low-Profile Switch-Depth Wall-Mount Half-Height Rack Enclosure

• U-Height: 15U
• Mounting style: Wall-mount, half-height enclosure designed for space-constrained environments
• Depth alignment: Switch-depth design optimized for network gear and cable routing
• Construction: All-welded steel with a durable black powder-coated finish
• Access features: Front door with secure latching; hinged back panel and removable side panels for service access
• Rails and compatibility: Standard 19-inch mounting rails compatible with a wide range of network equipment
• Ventilation: Perforated panels and ventilation openings to promote airflow and prevent heat buildup
• Security: Front access provides security while rear panels enable easy maintenance and cable management

How to install Eaton Tripp Lite Series SmartRack 15U

Before you begin, identify a sturdy wall with ample support and confirm clearance for door swing, cable routing, and ventilation. Gather the included mounting hardware and a basic set of tools. Start with a plan for cable management, including where your mains power, data cables, and vented areas will be positioned. With the wall-mount enclosure, you’ll be securing the unit to the wall, then attaching internal rails and mounting your equipment in a logical order. Follow these general steps to install the enclosure securely and efficiently:

1) Locate studs or structural anchors and mark your mounting points. For best results, attach the enclosure to wall studs to support the weight of the equipment inside. If studs are not available, use heavy-duty wall anchors rated for enclosure weight and equipment load. Ensure the chosen location allows for front access to ports and rear cable routing.

2) Install mounting rails and hardware. Attach the front rails to the enclosure per the manufacturer’s instructions, aligning with standard 19-inch rack spacing. Some models provide adjustable rails to accommodate varied equipment depths. Tighten all fasteners securely, checking that rails are parallel and level to ensure gear sits properly and cables route cleanly.

3) Secure the enclosure to the wall. With the rails in place, lift the enclosure into position and align the mounting holes with your wall anchors or studs. Tighten the mounting screws evenly to avoid warping the enclosure. Verify the unit is firmly anchored before proceeding to cable management and gear installation.

4) Route cabling and install equipment. Plan a neat cabling layout using the rear hinge area, door channels, and cable Management features. Install switches, patch panels, and other mounted devices, starting with the heaviest components to maintain balance inside the enclosure. Route power and data cables through the rear, leaving adequate slack for maintenance and future expansion. Close the rear access panels, then secure the front door for protection.

5) Final checks and testing. Confirm door latching works smoothly, verify cable routes do not pinch, and check for unobstructed airflow. Power up the equipment in a controlled sequence—typically starting with power distribution units (PDUs) and then devices—and verify connectivity, port activity, and temperature within safe operating ranges. Maintain a clean, accessible cabling system for ongoing serviceability and scalability.

Tips for successful installation: use cable ties and management channels to keep wires organized, label cables for easy future identification, and consider a small form factor UPS or surge protector within the enclosure if power protection is required. If you routinely upgrade equipment, modular rear panels and removable side panels will simplify future changes while retaining a compact, professional appearance.

Frequently asked questions

• Q: Is this rack designed specifically for wall mounting? A: Yes. It is a wall-mount, half-height enclosure designed to save floor space while accommodating standard 19-in. network equipment.
• Q: What equipment fits inside the 15U SmartRack? A: The enclosure accommodates typical 19-inch network gear such as switches, patch panels, and compact servers, with a switch-depth interior that helps optimize cabling and airflow.
• Q: Does it provide rear access for cabling? A: Absolutely. The hinged back panel and removable side panels give quick access for installation, maintenance, and future expansions without removing the enclosure from its wall mount.
• Q: Is there any dedicated ventilation or airflow support? A: Yes. Perforated doors and panels are designed to promote airflow and prevent heat buildup around mounted equipment, supporting reliable operation in compact spaces.
• Q: What security features are included? A: Front access is secured with a latch mechanism, and service access is simplified through secure rear panels and removable sides. Depending on the model, locking doors may be used to protect sensitive gear.
• Q: How do I know if this enclosure will fit my space? A: Measure your wall area, confirm sufficient clearance for door swing and rear cabling, and verify compatibility with standard 19-inch equipment. The 15U height and switch-depth interior are optimized for compact deployments without sacrificing access or airflow.