Eaton Tripp Lite Series TAA SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS

Protect mission-critical rack-mounted equipment with a dependable, fully regulated sine wave UPS designed for data centers, network closets, and telecom environments. The Eaton Tripp Lite Series SmartPro UPS delivers clean power to servers, storage devices, and networking hardware, helping prevent data loss and hardware stress during power fluctuations. With a 1 kVA / 800 W rating, 1U rack/vertical form factor, USB connectivity, optional network management capabilities, and six rugged 5-15 outlets, this unit is engineered to streamline uptime and simplify management in demanding IT deployments. Built with Trade Agreements Act (TAA) compliance, it’s a smart choice for enterprise-grade deployments that require reliable power protection and easy integration with existing management tools.

• Reliable protection for mission-critical rack-mounted equipment with a 1 kVA / 800 W capacity ensures your servers, NAS devices, and telecom gear stay online during outages and brownouts.
• Fully regulated sine wave output provides clean, steady power to sensitive IT hardware, minimizing voltage irregularities that can cause crashes, data corruption, or premature component wear.
• Flexible deployment in 1U rack or vertical (tower) configurations, paired with a 10-foot (3.05 m) power cord and a 120V input, enables efficient siting in data centers, racks, or network closets with minimal cable clutter.
• Power-management options include a USB interface for local monitoring and an optional network management card for remote visibility, alerts, and graceful shutdowns across the IT environment.
• Six NEMA 5-15R outlets provide ample surge-protected real estate for critical devices, keeping key servers, switches, and storage devices close at hand without sacrificing space for other gear.

Technical Details of Eaton Tripp Lite Series TAA SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS

• Topology: Line-Interactive with fully regulated sine wave output
• Capacity: 1 kVA / 800 W
• Input: 120V, NEMA 5-15P; 10 ft (3.05 m) power cord
• Output: 120V nominal with six NEMA 5-15R outlets
• Form factor: 1U rack-mountable / vertical (tower) compatibility
• Management: USB port for local monitoring; optional Network Management Card for remote management
• Compliance: TAA compliant for government and contractor environments
• Audible alerts: confirms loss of utility power, overload, and low battery status

How to Install Eaton Tripp Lite Series TAA SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS

• Prepare the installation location by selecting a stable, well-ventilated rack or cabinet space with adequate clearance for heat dissipation and service access.
• Mount the UPS in a 1U rack space or position it vertically as a tower if needed, securing it with appropriate hardware to prevent movement during operation or transport.
• Connect the 10-foot power cord from the NEMA 5-15P input to a properly grounded 120V receptacle. Ensure the outlet is on a dedicated circuit with adequate protection for critical loads.
• Attach your critical devices—servers, storage systems, switches, and telecom equipment—to any of the six NEMA 5-15R outlets. Distribute loads to avoid overloading a single outlet bank.
• If you plan to monitor or manage the UPS remotely, install the optional Network Management Card and connect it to your network. Install the USB management cable if you prefer local control via a computer or server, and install any required management software.
• Power on the UPS and verify operation using the front-panel indicators. Conduct a controlled power-down test to confirm that connected devices shut down gracefully and that alarms trigger as expected in scenarios like utility loss or overload.
• Configure basic settings, such as runtime estimates, notification preferences, and shutdown policies, to align with your organization’s IT SOPs. Keep firmware up to date according to the manufacturer’s recommendations to ensure compatibility with your devices and monitoring software.

Frequently Asked Questions

• What devices can I protect with this UPS? This SmartPro UPS is designed to protect mission-critical rack-mounted equipment, including servers, network-attached storage (NAS), switches, and telecom hardware, by delivering a stable, clean sine-wave output during power events.
• How many outlets does it have and what kind? It features six NEMA 5-15R outlets, all suitable for standard 120V equipment with a 15A rating, providing ample room to power several essential devices from a single, centralized power source.
• What management options are available? The unit includes a USB port for local management and monitoring. An optional Network Management Card can enable remote monitoring, alerts, and graceful shutdowns across a broader IT environment.
• What is the output waveform and why does it matter? The UPS delivers a fully regulated sine wave output, which is crucial for sensitive equipment and modern power supplies that require clean, stable AC power to avoid performance issues and unexpected reboots during power disturbances.
• Is this UPS compliant with trade regulations for procurement? Yes. It is TAA (Trade Agreements Act) compliant, making it suitable for use in government and contractor environments that require compliance with trade regulations for product procurement.
• How do I know the right load and runtime? Runtime depends on the actual load placed on the UPS. With 800 W rated capacity, you should sum the wattage of connected devices to stay well below the 800 W limit for optimal battery runtime and heat management. Use the included management tools to estimate runtime under your typical load.