Ecostruxure Micro Data Center with 24U SX Rack, 3kVA, 120V, 60 Hz, Pre-Assembled – 1199H x 600W x 1070D mm

Immerse your IT infrastructure in a compact, secure, and turnkey solution designed for reliability at the edge and in the data center. The Ecostruxure Micro Data Center (MDC) with a 24U SX rack delivers a complete, stand-alone enclosure that houses critical servers, storage, and networking gear with built-in power distribution, an uninterruptible power supply (UPS), and sophisticated environmental monitoring. This pre-assembled system is engineered to minimize deployment time, maximize protection for vital applications, and simplify ongoing management through EcoStruxure compatibility. Whether you’re consolidating a data center rack footprint or extending edge capacity, this MDC is engineered to safeguard your IT investment while delivering scalable performance, security, and intelligent monitoring.

• All-in-one MDC solution: A turnkey enclosure that combines a 24U SX rack, integrated UPS, ready-made power distribution, and built-in environmental sensing for immediate deployment and ongoing protection of critical workloads.
• Secure, stand-alone enclosure: A rugged, closed cabinet designed to shield IT gear from dust, tampering, and environmental fluctuations, with lockable doors and enhanced physical security for sensitive operations.
• Reliable power protection: A 3kVA UPS paired with integrated PDUs delivers clean, conditioned power to IT equipment, supports graceful shutdowns, and helps prevent data loss during outages or fluctuations on a 120V/60 Hz grid.
• Intelligent environmental monitoring: Built-in sensors monitor temperature, humidity, and ambient conditions, delivering real-time alerts and historical data to keep devices within safe operating ranges and optimize cooling.
• Pre-assembled for rapid deployment: Factory-assembled and tested to reduce on-site steps, enabling faster commissioning, simplified maintenance, and predictable deployment timelines for edge sites or remote locations.

Technical Details of Ecostruxure Micro Data Center

• Rack configuration: 24U SX rack included, offering ample space for servers, storage, and networking gear within a compact footprint.
• Enclosure type: Stand-alone, secure cabinet designed to protect critical IT equipment while providing organized cable management and easy service access.
• Power and protection: 3kVA UPS with integrated power distribution units (PDUs) to support protected IT loads and clean power delivery at 120V, 60 Hz.
• Dimensions: 1199 mm (H) x 600 mm (W) x 1070 mm (D), providing a scalable, space-efficient solution for data centers and edge deployments.
• Assembly status: Pre-assembled and factory-tested for rapid deployment and predictable performance, reducing on-site configuration time.
• Environmental monitoring: Sensors for temperature and humidity with alerting, trend data, and integration with EcoStruxure for remote visibility and proactive management.
• Management and integration: Designed to be compatible with EcoStruxure architecture, enabling centralized monitoring, remote management, and scalable integration with existing IT and facility systems.

How to install Ecostruxure Micro Data Center

Preparing the site and equipment correctly ensures a smooth, safe, and compliant deployment. Begin by selecting a stable, level floor with adequate airflow and clearance for access, cabling, and maintenance. Ensure the area has sufficient electrical service and a grounded, surge-protected circuit capable of supporting the MDC’s 120V, 60 Hz requirements and UPS load. Unpack the MDC in a clean area, verify that all components are present, and inspect for any transit damage. Once verified, position the stand-alone enclosure in the desired location, using appropriate leveling feet or racks if required. Route sleeves and conduits for power and data that will feed the PDUs and IT devices, keeping cable management channels clear for airflow and service access.

• Power and connectivity setup: Connect the MDC’s UPS input to a dedicated electrical circuit with proper grounding. Attach PDUs to the UPS output and plan IT device connections to the PDU outlets, ensuring loads are balanced and within the UPS’s capacity.
• Install IT equipment: Slide servers, storage, and networking gear into the 24U rack, secure equipment with rails, and manage cables using built-in channels and ties to minimize obstruction to airflow.
• Sensor and monitoring configuration: Power up the MDC and configure environmental sensors for temperature and humidity thresholds. Enable EcoStruxure integration if you plan to leverage centralized monitoring, alerts, and dashboards.
• Calibration and testing: Verify power sequencing, test orderly startup and shutdown procedures, and simulate fault conditions to confirm alerts are received and escalations are properly triggered.
• Documentation and validation: Record wiring schematics, sensor thresholds, and asset inventory. Validate that the enclosure doors lock securely and that there is no obstruction to intake or exhaust airflow.

Post-installation, run a full system check to confirm UPS operation, PDUs power distribution, and sensor reporting accuracy. Regular maintenance should include sensor calibration checks, firmware updates for management modules, and periodic inspections of seals and door locks. By planning for routine upkeep, you extend the MDC’s lifespan and preserve the reliability of your critical workloads.

Frequently asked questions

• Q: What does the Ecostruxure MDC include out of the box? A: The MDC ships with a 24U SX rack, a 3kVA UPS, integrated PDUs, a secure stand-alone enclosure, and built-in environmental monitoring. It is designed for turnkey deployment and EcoStruxure compatibility for remote monitoring and management.
• Q: What environments is this MDC suited for? A: It is ideal for data centers needing compact rack space, edge deployments at remote sites, and facilities requiring protected, centralized IT infrastructure with integrated power and monitoring.
• Q: Can I expand my MDC later? A: Yes. The 24U rack provides room for additional servers, storage, and networking gear, and EcoStruxure integration supports scalable monitoring and management as your IT footprint grows.
• Q: What are the essential electrical requirements? A: The MDC operates on standard 120V, 60 Hz power with a UPS to ensure clean, uninterrupted power delivery. Confirm the local electrical supply matches these specifications and that a properly rated circuit is dedicated to the MDC and its UPS.
• Q: How does the environmental monitoring work? A: Integrated sensors measure temperature and humidity, generating real-time alerts and storing historical data. When connected to EcoStruxure, you gain centralized visibility, remote alerting, and proactive maintenance capabilities.