EDGE 16GB PC310600 ECC DDR3 RDIMM (2RX4) Memory Module

The EDGE 16GB (1X16GB) PC310600 ECC DDR3 RDIMM (2RX4) is a premium memory module built to lift the performance and reliability of servers, workstations, and high-demand computing environments. From EDGE Memory, a trusted name with over 30 years of experience in memory solutions, this DDR3 ECC RDIMM delivers robust error correction, stable operation, and dependable bandwidth for data-intensive workloads. Designed for server-grade use, it combines ECC protection, registered memory technology, and a dual-rank configuration to support memory-intensive tasks such as virtualization, large-scale databases, and high-traffic web services. Whether you’re upgrading a single server node or equipping a multi-socket system, this module provides a seamless, plug-and-play upgrade path with compatibility across a wide range of DDR3 ECC RDIMM platforms. The PC3-10600 rated speed translates into smooth data throughput, lower latency under load, and improved caching performance, making it a prime choice for professionals seeking reliability without sacrificing efficiency. EDGE Memory’s engineering focus on precision manufacturing ensures consistent unit-to-unit performance, backed by comprehensive testing and a commitment to quality that professionals rely on in mission-critical environments. If you’re looking to maximize uptime while expanding memory capacity, this EDGE 16GB RDIMM is engineered to meet the demands of modern data centers, virtualization hosts, and compute-intensive workstations.

• Enhanced ECC protection and error correction for improved data integrity in servers, virtualization hosts, and databases, helping to prevent silent data corruption during critical operations.
• 2Rx4 dual-rank RDIMM configuration delivers higher memory density and improved multi-channel throughput, supporting tighter timing across memory banks for better server performance under heavy workloads.
• Generous 16GB capacity in a single module enables larger in-memory datasets, faster cache warm-up, and easier expansion paths with fewer DIMMs required for scalable systems.
• PC3-10600 (1333MHz) DDR3 speed balances performance and power efficiency, delivering steady memory bandwidth for virtualization, I/O-intensive tasks, and enterprise applications.
• EDGE Memory quality and support: built byEDGE with more than three decades of experience, with rigorous testing, compatibility across major server platforms, and access to reliable technical support and warranty.

Technical Details of EDGE 16GB PC310600 ECC DDR3 RDIMM (2RX4)

• Memory Type: DDR3 ECC Registered (RDIMM)
• Capacity: 16GB (1x16GB)
• Speed: PC3-10600 (1333MHz)
• Rank/Width: 2Rx4
• Pin Count: 240 pins
• Voltage: 1.5V
• Form Factor: RDIMM
• ECC: Yes
• Compatibility: Servers and workstations supporting DDR3 ECC RDIMM modules

how to install EDGE 16GB PC310600 ECC DDR3 RDIMM (2RX4)

To install this memory module safely and effectively, follow these steps. Power down the system completely, unplug the power cord, and ground yourself to minimize static discharge. Open the server or workstation chassis, locate the appropriate DDR3 DIMM slots for ECC RDIMM modules, and identify the recommended memory population order from the motherboard manual. If you’re upgrading an existing system, remove any existing memory modules in the same channel group, taking care to release the retaining clips on both ends of the slot. Align the notches on the edge connector with the keying in the slot, and insert the module straight down into the slot with firm, even pressure until the retention clips snap into place. Avoid wiggling the module once seated, as misalignment can cause improper contact. If using multiple modules, install them in the recommended slots according to the system’s memory topology to maximize bandwidth and stability. Reassemble the chassis, reconnect power, and boot the system. Enter the BIOS or UEFI to verify the memory is recognized and running at the correct speed (1333MHz) and with ECC enabled. Run a memory diagnostic tool (such as MemTest86 or a built-in OS utility) to confirm stability under typical workloads. If any issues arise, reseat the modules, check for proper seating, and ensure BIOS settings are aligned with the motherboard’s memory configuration guidelines. Finally, monitor system performance and stability during initial operation to confirm reliable memory behavior under your expected workload.

Frequently asked questions

• Q: What does PC310600 mean? A: PC310600 refers to DDR3 memory with a data transfer rate of 10600 MT/s, commonly labeled as PC3-10600, which corresponds to 1333MHz memory speed.
• Q: Is this memory ECC and RDIMM? A: Yes. It is ECC (Error-Correcting Code) memory in a Registered DIMM (RDIMM) form factor, designed for reliability in servers and workstations.
• Q: What systems is it compatible with? A: It works with servers and workstations that support DDR3 ECC RDIMM modules, especially platforms that utilize dual-rank 2Rx4 memory configurations. Always verify compatibility with your motherboard or server’s QVL (Qualified Vendors List).
• Q: How many modules come in this bundle? A: This listing describes a single 16GB module (1x16GB). For higher memory capacity, you can add additional 16GB RDIMMs in matched configurations as supported by your system.
• Q: What kind of warranty or support does EDGE Memory provide? A: EDGE Memory products are backed by the company’s standard warranty and technical support policy, reflecting EDGE’s commitment to reliability and service for professional deployments.
• Q: Do I need to update BIOS for new memory? A: In some server configurations, BIOS updates improve memory compatibility and performance with newer modules. If you encounter recognition or stability issues, consider checking the motherboard or server vendor’s guidance and applying any recommended BIOS updates.