EDGE 4GB DDR2 ECC Registered 240-Pin Kit (2x2GB) – SR

Enhance the reliability and performance of servers, workstations, and memory-intensive applications with EDGE Memory’s 4GB DDR2 ECC Registered kit. Presented as a 2x2GB bundle, this kit is crafted for environments where data integrity and stability are non-negotiable.EDGE Memory has a long-standing history dating back to 1986, and today it sits behind the world’s largest manufacturers of domestically produced memory modules and solid-state drives. This pedigree translates into dependable, server-grade memory designed to keep critical systems running smoothly under load. The ECC (Error-Correcting Code) capability detects and corrects single-bit memory errors on the fly, helping prevent silent data corruption and unexpected downtime. Registered (buffered) memory further reduces the electrical load on the memory controller, which is especially beneficial in servers and workstations that rely on stable, sustained performance. If you’re upgrading aging servers, virtualization hosts, or high-demand workstations, this EDGE kit provides the robust foundation you need for consistent performance and uptime.

• Bullet 1: ECC memory with registered buffering for enhanced reliability and data integrity in mission-critical systems.
• Bullet 2: 4GB total capacity delivered as a dual-channel 2x2GB kit, ideal for balanced performance and easy upgrade paths.
• Bullet 3: 240-pin DIMMs designed for servers and workstations that support DDR2 ECC Registered memory, enabling broad compatibility with enterprise-class boards.
• Bullet 4: PC26400 speed grade (DDR2-333) provides solid bandwidth suitable for memory-intensive workloads, virtual machines, databases, and multitasking environments.
• Bullet 5: A trusted EDGE Memory product backed by decades of industry presence and support, aimed at delivering dependable performance in business-critical systems.

Technical Details of EDGE 4GB DDR2 ECC Registered 240-Pin Kit

• Capacity: 4GB total (2x2GB)
• Memory Type: DDR2 SDRAM
• Speed: PC2-26400 (DDR2-333)
• ECC: Yes
• Registered/Buffered: Registered
• Form Factor: 240-pin DIMM
• Voltage: 1.8V (standard DDR2 memory voltage)
• Rank: Typically Registered (R) memory for server-grade stability
• Applications: Designed for servers and workstations that require ECC and buffered memory
• Manufacturer: EDGE Memory

How to install EDGE 4GB DDR2 ECC Registered 240-Pin Kit

• Power down the computer or server, unplug the power connector, and ground yourself to prevent static discharge.
• Open the system chassis and locate the motherboard memory slots. Confirm that your board supports DDR2 ECC Registered memory, as not all DDR2 slots are configured for ECC or registered modules.
• If you are replacing existing modules, remove them carefully by releasing the module latches and sliding the DIMMs out of their sockets. If you’re adding to existing memory, identify open DDR2 slots suitable for your motherboard’s dual-channel configuration.
• Align the DIMM’s notch with the key in the socket, and press straight down evenly until the latches click into place. Do not tilt the module or apply excess force.
• Install the modules in the recommended slots for dual-channel operation (refer to your motherboard manual for the exact slot layout). If your board uses color-coded slots, place the modules in matching color pairs to optimize dual-channel performance.
• Close the chassis, reconnect power, and boot the system. Enter BIOS/UEFI to verify that the memory is detected and ECC is enabled if your motherboard exposes this option. Save changes and reboot.
• Run a memory diagnostic or stress test after startup to ensure stability. If any errors appear, reseat the modules or test each module individually to isolate a potential faulty module.

Frequently asked questions

• Q: Is this memory ECC and registered?
  A: Yes. The kit features ECC and registered (buffered) DDR2 memory designed for improved reliability in servers and workstations.
• Q: What systems is this kit compatible with?
  A: It is intended for servers and workstations that support DDR2 ECC Registered 240-pin DIMMs. Always verify motherboard or system vendor specifications for ECC/registered support and DDR2 compatibility.
• Q: What is the configuration and capacity?
  A: The kit provides 4GB total capacity in a 2x2GB configuration, optimized for dual-channel operation where supported by the motherboard.
• Q: What voltage does this memory use?
  A: The standard DDR2 memory voltage is 1.8V; check your motherboard’s specifications for exact timing and voltage requirements.
• Q: Does this kit come with any heat spreaders?
  A: EDGE memory kits vary by model; some modules include heat spreaders while others come with OEM-style components. Refer to the product listing for specifics on heat dissipation features.