Electro-Voice EVC-1082-96W 8-Inch Indoor Wall Mountable Speaker

The Electro-Voice EVC-1082-96W is a premium 8-inch, two-way indoor loudspeaker engineered for wall-mount installations in commercial spaces, churches, schools, retail environments, gyms, and hospitality venues. Built to deliver clear speech and immersive music with dependable performance, this model combines robust construction, precise coverage, and flexible mounting options to meet the demands of modern sound systems. With a rotatable waveguide for flexible orientation, a 90° x 60° constant directivity pattern, and a high power handling capability, the EVC-1082-96W is a versatile choice for installers seeking reliable, intelligible sound that stays consistent across listening zones. The white, discreet enclosure blends with interiors while maintaining formidable sonic output, making it ideal for permanent wall installations where aesthetics and performance must coexist. This speaker is a passive system, designed to be driven by a suitable amplifier or processor, allowing you to tailor amplification and system processing to the specific acoustic characteristics of your space. Whether you’re delivering clear vocal presentations, background music, or paging, the EVC-1082-96W provides the fidelity and headroom needed to keep audiences engaged and informed. The combination of an 8-inch woofer, a two-way design, and Electro-Voice’s reputation for rugged engineering ensures reliable daily use and minimal maintenance in demanding environments.

• Powerful, clean sound with an 8-inch woofer and two-way design, optimized for clear dialog and musical content across indoor spaces.
• Rotatable waveguide and 90° x 60° constant directivity deliver consistent coverage, letting you tailor vertical/horizontal dispersion to room geometry.
• Durable indoor wall-mountable enclosure in a pristine white finish, featuring gland nut cover and stainless steel grille on PI versions for enhanced protection and longevity.
• High power handling: 200 W continuous (800 W peak) with 91 dB sensitivity and up to 120 dB maximum SPL, providing ample headroom for speech and music in medium to large rooms.
• Passive system with optional high-quality transformer and patented Automatic Saturation Control, offering flexible integration with a range of amplifiers and signal processing solutions.

Technical Details of Electro-Voice EVC-1082-96W

• Type: 2-way indoor wall-mountable loudspeaker
• Woofer: 8 inches
• Coverage: 90° x 60° constant directivity
• Waveguide: Rotatable
• Power handling: 200 W continuous, 800 W peak
• Sensitivity: 91 dB (1W @ 1m)
• Maximum SPL: 120 dB
• Enclosure color: White
• Grille: Stainless steel grille on PI versions; gland nut cover
• Mounting: Indoor wall-mountable
• Transformer: Optional high-quality transformer
• Protection/Control: Patented Automatic Saturation Control
• Notes: Passive speaker requiring external amplification and processing

How to install Electro-Voice EVC-1082-96W

Installing the EVC-1082-96W is straightforward for a professional AV technician or a capable installer. Start with careful planning of placement to achieve the intended coverage and intelligibility across the listening area. Consider seating rows, room geometry, and potential reflective surfaces that could affect sound distribution. Position the speaker at an appropriate height on the wall to align the vertical dispersion with the audience’s ear level and to minimize glare and obstructions. Ensure that the mounting surface can support the weight of the speaker and any hardware used for the wall mount.

• Prepare the mounting location: locate studs or use appropriate wall anchors; verify there is access to power and signal routing where needed, and plan cable routing to keep lines neat and secure.
• Attach the wall-mount bracket or enclosure bracket to the wall using hardware suitable for the surface. Tighten fasteners to a secure torque, ensuring the bracket is level and plumb for accurate aiming.
• Route the speaker cable from your amplifier or processing equipment to the mounting location. Maintain proper polarity (positive to positive, negative to negative) to preserve phase alignment with other loudspeakers in the system.
• Mount the EVC-1082-96W onto the bracket. If the design includes a tilt or swivel mechanism, adjust the angle to achieve the desired coverage pattern. Rotate the waveguide if needed to optimize horizontal dispersion for the room layout.
• Connect the speaker to your amplifier or DSP with the appropriate impedance and spectral processing settings. Power up at a low level, verify the signal path, and gradually increase to the intended operating level. Check for distortion, reflections, and coverage uniformity; fine-tune orientation and any equalization or delay settings as required.
• Securely seal and tidy all cabling; install any grilles or protective covers; document the installation for future maintenance and space reconfiguration. Conduct a final sound-check with typical content to confirm intelligibility and balance across seating areas.

Frequently asked questions

Q: What is the power rating of the Electro-Voice EVC-1082-96W?
A: The speaker is designed for 200 W continuous (RMS) power handling with up to 800 W peak power, providing ample headroom for speech and music in medium to large indoor spaces.

Q: What coverage does this speaker provide?
A: It offers 90° x 60° constant directivity, with a rotatable waveguide that allows you to tailor horizontal and vertical dispersion to the room layout for even sound distribution.

Q: Is the EVC-1082-96W suitable for wall mounting?
A: Yes. It is specifically designed as an indoor wall-mountable speaker, providing a discreet, space-saving installation while delivering strong performance.

Q: What color is the enclosure?
A: The standard enclosure is white, which blends well with most interiors and commercial environments.

Q: Does it require an amplifier?
A: Indeed. As a passive system, it requires an external amplifier or processor. The speaker can be paired with a transformer option and benefits from the patented Automatic Saturation Control for optimized performance with various amplifiers and signal chain configurations.

Q: Are there any distinctive protective features?
A: On PI versions, the speaker features a gland nut cover and a stainless steel grille for added durability and protection in more demanding settings. The design emphasizes reliability in busy environments while maintaining a clean appearance.

Q: What applications is this speaker best suited for?
A: The EVC-1082-96W excels in professional venues requiring clear speech intelligibility and music playback, such as classrooms, houses of worship, conference rooms, retail spaces, fitness centers, and hospitality areas. Its robust coverage and headroom make it a versatile choice for distributed audio systems.

Q: Can I adjust the dispersion after installation?
A: Yes. The rotatable waveguide and adjustable mounting provide flexibility to optimize coverage after installation. It’s advisable to test coverage with representative content and adjust angles to achieve uniform listening levels across seating zones.