ENET Cisco Compatible GLC-T-10G: 10GBASE-T Copper SFP+ for Cat6A/Cat7 RJ-45 (30m) – TAA Compliant

Experience true 10 Gigabit Ethernet over copper with ENET’s GLC-T-10G SFP+ transceiver. This Cisco-compatible, TAA-compliant module delivers reliable 10GBASE-T connectivity through standard RJ-45 ports on Cat6a/Cat7 cabling. It’s the functionally identical alternative to Cisco’s GLC-T, engineered for interoperability, value, and seamless deployment across a wide range of switches and routers. Perfect for data centers, enterprise networks, and edge deployments, the ENET GLC-T-10G combines enterprise-grade reliability with a cost-effective upgrade path from 1G copper links to 10G copper backbones.

Designed to fit any standard SFP+ slot, this copper-based transceiver provides a straightforward upgrade path without rewiring fiber keeps. The compact, rugged enclosure is built to withstand the demands of 24/7 operations in a busy data center or campus environment, while delivering a consistent 10 Gbps link over copper up to 30 meters on Cat6a/Cat7 cabling. The GLC-T-10G supports auto-negotiation and plug-and-play installation, reducing downtime during migrations and ensuring compatibility with a broad ecosystem of network devices. As a TAA-compliant and RoHS-compliant product, it aligns with enterprise procurement policies and sustainability standards while offering reliable performance you can depend on.

• 10GBASE-T copper in a compact SFP+ form factor — upgrade switches/routers with 10G over copper, no fiber changes required.
• Maximum reach up to 30 meters on Cat6a or Cat7 cabling, enabling high-speed links across racks, cabinets, and data centers.
• Cisco compatibility — functionally identical to Cisco GLC-T and broadly tested for interoperability across multiple vendors and firmware versions.
• Plug-and-play installation — hot-swappable in SFP+ ports with auto-negotiation, auto-MDIX, and minimal downtime during deployment or upgrades.
• Compliance and reliability — TAA compliant, RoHS compliant, and backed by ENET’s support and quality assurance for enterprise environments.

Technical Details of ENET Cisco Compatible GLC-T-10G SFP+ (10G Version of GLC-T)

• Form Factor: SFP+ copper transceiver
• Data Rate: 10 Gbps (10GBASE-T)
• Interface: RJ-45 copper interface through SFP+ footprint
• Max Distance: Up to 30 meters on Cat6a/Cat7 cabling
• Compatibility: Cisco GLC-T compatible; ENET functionally identical; tested interoperability with various switches/routers
• Compliance: TAA compliant; RoHS compliant; ENET Quality Assurance tested

How to Install ENET GLC-T-10G

• Power down or suspend network device if required by your maintenance policy, then locate an available SFP+ port on your switch or router.
• Insert the ENET GLC-T-10G module into the SFP+ slot until it seats securely. Do not force; ensure the latch engages and the module locks into place.
• Connect a Cat6a or Cat7 RJ-45 patch cable from the switch/router port to your network device. For optimal 10G performance, use certified copper cabling with proper shielding and terminations.
• Power up the device or resume operations. The port should auto-negotiate to 10 Gbps if the connected device supports 10GBASE-T; verify link status via the switch’s interface status indicators.
• Configure any necessary switch port settings (for example, speed/duplex as auto-negotiation or 10GBASE-T mode) and confirm a stable link with nominal error-free transmission tests.
• Monitor performance and throughput after installation. If interoperability issues arise, consult compatibility guides, update firmware on both devices, or contact ENET support for guidance.

Frequently Asked Questions

• Q: Is the ENET GLC-T-10G truly Cisco compatible? A: Yes. It is designed to be functionally identical to Cisco’s GLC-T, with broad interoperability across many Cisco and non-Cisco devices. It passes standard validation for 10GBASE-T operation on RJ-45 copper networks.
• Q: What cables are required for 10GBASE-T using this transceiver? A: You should use shielded Cat6a or Cat7 copper cables to achieve reliable 10 Gbps performance up to 30 meters. Unshielded variants may work but are not guaranteed to meet the 10G requirements over longer distances.
• Q: What is the warranty and support scope for ENET GLC-T-10G? A: ENET provides standard vendor warranty and technical support. This includes compatibility guidance, troubleshooting, and replacement options within the terms of the warranty policy.
• Q: Can this module operate across different vendor switches? A: Yes. It is designed for broad interoperability, including use with non-Cisco devices, as long as the device supports 10GBASE-T SFP+ copper transceivers and copper RJ-45 connections.
• Q: Is this module suitable for data centers or enterprise campuses? A: Absolutely. The GLC-T-10G is intended for enterprise-grade deployments requiring 10G copper links over short-to-mid distances, with a compact form factor and reliability appropriate for data centers, server rooms, and edge deployments.
• Q: Does this transceiver require any special configuration? A: In most cases, it operates in a plug-and-play manner with auto-negotiation. For optimal performance, ensure the connected devices support 10GBASE-T and that cabling meets the relevant CAT standards. If issues occur, a firmware update or compatibility check may be advised.