ENET NetApp Compatible X6596-R6 Tri-rate SFP+ 14.025 Gb/s Fibre Channel 850nm LC Connector

Introducing an essential upgrade for data centers and Fibre Channel networks: the ENET NetApp Compatible X6596-R6 Tri-rate SFP+ transceiver. This high-performance optical module is designed to deliver dependable, plug-and-play connectivity across NetApp storage environments and other Fibre Channel deployments. With tri-rate capability at 4.25, 8.5, and 14.025 Gb/s, it provides flexible bandwidth options to match evolving storage workloads, while the 850 nm optics and LC connector deliver reliable, clean signal transmission over multimode fiber. Built to be functionally identical to the NetApp X6596-R6, this ENET transceiver combines compatibility with cost-effective operation and rigorous reliability. It is engineered for modern data centers that require seamless integration with existing NetApp ecosystems, while offering the performance you need for high-speed storage networking, Ethernet LAN backbones, and data-intensive applications. The module is designed to support 16GBase-SW technology in compatible environments, helping ensure broad compatibility with the latest storage and switch fabrics. With this ENET SFP+ transceiver, you gain a trusted, enterprise-grade solution that reduces procurement complexity and simplifies operational logistics—without sacrificing performance, lead time, or serviceability.

• Tri-rate flexibility: Operates at 4.25 Gb/s, 8.5 Gb/s, and 14.025 Gb/s, enabling you to adapt bandwidth to varying traffic patterns and storage workloads without swapping modules.
• 850 nm optics with LC connector: Optimized for multimode fiber, delivering robust link integrity and reliable performance in high-density data-center deployments.
• NetApp compatibility and X6596-R6 equivalence: Functionally identical to the NetApp X6596-R6, ensuring smooth integration with NetApp storage systems and familiar diagnostics.
• Fibre Channel ready: Specifically engineered for Fibre Channel environments, delivering compatibility and dependable data transport for storage networks.
• TAA compliant and enterprise-ready: Meets procurement and compliance requirements for government and enterprise deployment, with a focus on long-term availability and support.

Technical Details of ENET NetApp Compatible X6596-R6

• Form factor: SFP+ Transceiver
• Data rates: Tri-rate: 4.25 Gb/s / 8.5 Gb/s / 14.025 Gb/s
• Wavelength: 850 nm
• Fiber type / Connector: Multimode fiber with LC connector
• Applications: Fibre Channel and Ethernet LAN backbones in data centers
• Compatibility: NetApp compatible; functionally identical to X6596-R6
• Compliance: TAA compliant
• Technology notes: Supports multi-rate operation and reliable long-haul connections within standard data-center fabrics

How to install ENET NetApp Compatible X6596-R6

• Verify compatibility: Confirm that your switches, hosts, and NetApp storage systems support SFP+ modules and the tri-rate operation at the specified speeds.
• Power down (when required): If your hardware requires a power-down procedure for hot-swapping, follow the vendor guidelines before removing any existing module.
• Insert the module: Align the ENET X6596-R6 transceiver with the SFP+ slot and firmly seat it until it clicks into place. Ensure the handle or latch, if present, remains secured.
• Connect fiber cables: Attach LC-LC fiber patch cables to the 850 nm LC connectors. Verify fiber type, mode (MMF), and link length according to your network design.
• Power up and verify: Restore power if you powered down. Check the link status LEDs on both ends; a solid or blinking link indicator typically confirms a healthy connection.
• Configure speed and mode: Through your network management interface, configure the port to operate at the desired rate (4.25, 8.5, or 14.025 Gb/s) if your equipment requires manual setting.
• Test the path: Run a basic connectivity test and, if possible, a throughput test to verify data integrity and performance across the path.
• Handle with care: Avoid touching optical connectors, and store unused modules in a protective environment to prevent dust or ESD damage.
• Document the change: Record the replacement or installation details in your asset management system for future reference and compliance.

Frequently asked questions

• What is the ENET NetApp Compatible X6596-R6? It is a Tri-rate SFP+ optical transceiver designed for Fibre Channel and high-speed storage networking. It mirrors the NetApp X6596-R6 form and functionality while offering ENET’s compatible, cost-effective alternative.
• What speeds does it support? The module supports three data rates: 4.25 Gb/s, 8.5 Gb/s, and 14.025 Gb/s, enabling flexible bandwidth management to match workload requirements.
• Which fiber and connector are used? It uses 850 nm optics with an LC connector and is intended for multimode fiber, a common choice for data-center Fibre Channel deployments.
• Is it compatible with NetApp storage systems? Yes. The ENET X6596-R6 is designed to be functionally identical to the NetApp X6596-R6, providing a familiar, plug-and-play experience in NetApp environments.
• Is this product compliant with procurement standards? Yes. It is TAA compliant, meeting requirements for many government and enterprise purchasing programs.
• Can I hot-swap this module? In most compatible systems, SFP+ transceivers are hot-swappable. Always consult your hardware vendor’s guidelines and perform swaps with power on/off procedures as required by your equipment.
• How do I verify installation success? After insertion, check the link/activity LEDs on both ends, and perform a simple throughput test to confirm data transmission at the selected rate.