Epson ELPLP82 Replacement Projector Lamp (Dual) – Ultra High Efficiency for PowerLite Pro Z Series

The genuine Epson ELPLP82 replacement projector lamp (dual unit set) is engineered to restore peak performance for the Epson PowerLite Pro Z series. When you choose a dual-lamp configuration, you’re selecting reliability, redundancy, and sustained brightness that professionals rely on for meetings, classrooms, and large-screen presentations. This lamp is built to deliver the same color accuracy, luminance, and white balance as the original lamp, ensuring that every slide, video, and image is projected with Epson-quality clarity. For institutions and event venues that require minimal downtime, the ELPLP82 dual lamp set optimizes uptime, reduces maintenance interruptions, and keeps your projection system in peak condition over the long term. As a genuine Epson replacement, you benefit from factory-tested performance, consistent color fidelity, and compatibility with the original ballast and projector housing for a seamless, worry-free replacement experience.

• Genuine Epson ELPLP82 dual lamp set: This is not an aftermarket substitute. The ELPLP82 dual unit delivers authentic brightness, color accuracy, and reliability that matches the original Epson lamp, helping protect investment in your PowerLite Pro Z series projector over years of use.
• Ultra High Efficiency (UHE) design: The UHE technology behind ELPLP82 prioritizes efficient light production, delivering strong brightness while conserving energy. This translates to lower power consumption per lumen and a longer span between service intervals, helping reduce total cost of ownership for high-demand environments.
• Dual-lamp redundancy for mission-critical environments: The dual lamp configuration provides an extra layer of reliability. If one lamp needs replacement, the setup enables continued operation with the remaining lamp, minimizing downtime during important presentations or live events.
• Broad compatibility with PowerLite Pro Z models: Specifically engineered for the Z10000UNL, Z10005UNL, Z9870UNL, Z9750UNL, Z11000WNL, Z9900WNL, and Z980 projectors, this lamp is a straightforward, drop-in replacement that preserves image quality, color accuracy, and brightness consistency across compatible devices.
• Simple, manufacturer-grade installation and maintenance: Designed to work with the original Epson ballast and housing, the ELPLP82 lamp is straightforward to install with minimal risk when following standard replacement procedures. Reliable performance after installation means you can focus on delivering engaging content rather than maintenance concerns.

Technicial Details of Epson ELPLP82 Replacement Projector Lamp (Dual)

• Product type: Replacement projector lamp (dual unit set)
• Brand: Epson
• Model: ELPLP82
• Lamp type: Ultra High Efficiency (UHE)
• Configuration: Dual lamp unit
• Compatible models: Epson PowerLite Pro Z10000UNL, Z10005UNL, Z9870UNL, Z9750UNL, Z11000WNL, Z9900WNL, Z980

How to install Epson ELPLP82 Replacement Projector Lamp (Dual)

• Power off the projector and unplug it from the wall outlet. Allow the unit to cool completely before handling the lamp module to prevent burns and avoid damage to internal components.
• Access the lamp compartment following the projector’s service manual. Remove any protective covers or screws as instructed, using the proper screwdriver and handling tools to avoid stripping fasteners.
• Carefully disconnect the lamp connector and extract the old lamp module from the housing. Hold the lamp by its base, not by the glass surface, to prevent fingerprints or damage that could affect light output.
• Insert the new ELPLP82 dual lamp into the housing, ensuring it seats securely in the guide slots and aligns with any alignment pins. Reconnect the lamp connector if applicable, and verify that the module is firmly seated.
• Secure the lamp unit with screws, replace the lamp cover, and reattach any protective panels. Reconnect power and allow the projector to initialize before full usage. Some projector models require a warm-up period to reach peak brightness and color stability; consult your user manual for exact guidelines.

Frequently asked questions

• Q: Is the ELPLP82 compatible with my PowerLite Pro Z series projector?
• A: The ELPLP82 dual lamp set is designed for Epson PowerLite Pro Z10000UNL, Z10005UNL, Z9870UNL, Z9750UNL, Z11000WNL, Z9900WNL, and Z980 models. If your projector is one of these models, this lamp should be a compatible replacement.
• Q: What does UHE mean and why is it important?
• A: UHE stands for Ultra High Efficiency. It denotes improved brightness per watt and longer lamp life, delivering more consistent performance while reducing energy consumption and maintenance needs over time.
• Q: Can I replace only one lamp in a dual-lamp set?
• A: If your projector supports independent lamp operation or requires single-lamp replacements, follow the manufacturer’s guidance for dual-lamp configurations and maintenance. In many installations, dual lamps are designed to be replaced as a pair to preserve uniform brightness and color balance.
• Q: Will installing a genuine Epson lamp affect image quality?
• A: Yes. A genuine Epson ELPLP82 replacement lamp is engineered to restore original image brightness, color fidelity, and sharpness when installed correctly, ensuring consistent projection identical to the projector’s initial performance.
• Q: How long does the ELPLP82 lamp last?
• A: Lamp life varies with usage, projector settings, and operating conditions. As with other high-quality Epson projection lamps, lifespan is optimized for longevity in typical projection workloads, with performance maintained through proper installation, handling, and adherence to the projector’s care guidelines.