EpsonNet Type B Internal Ethernet Print Server

The EpsonNet Type B Internal Ethernet Print Server is a compact, plug‑and‑play solution designed to bring your Epson impact printer onto a modern network. This internal module sits inside the printer and acts as a bridge between the device’s native parallel interface and an Ethernet network, enabling fast, reliable, shared printing across offices, warehouses, and production environments. By delegating print routing to a dedicated network server, it reduces bottlenecks, simplifies administration, and supports efficient job queues for high‑volume printing tasks. If you rely on impact printers for invoices, forms, receipts, or continuous feed tasks, this internal print server helps you streamline workflows and get more value from your existing hardware.

• Seamless network integration for Epson impact printers: This internal Ethernet print server enables a direct link between your printer and a wired network, allowing multiple users to submit print jobs from any connected workstation without leaving the printer’s control panel or requiring a PC‑based print server. The result is faster job turnaround, easier device management, and reduced IT overhead in busy environments where paper forms and labels are in constant use.
• Flexible network configuration for reliable access: The Type B module supports both dynamic (DHCP) and fixed IP addressing, giving you the flexibility to fit your network design. Whether you manage a small office with a single printer or a large facility with multiple devices, you can assign stable IPs to ensure consistent printing, easy tracking, and straightforward integration with your existing print queues and management tools.
• Enhanced reliability and performance for high‑volume tasks: By moving print processing away from end‑user workstations to a dedicated network server, you minimize delays caused by busy PC resources or intermittent client connections. This can improve throughput for large batches of forms, labels, and multi‑page documents, while maintaining predictable print times and queued jobs even during peak periods.
• Broad compatibility with standard TCP/IP printing: The EpsonNet Type B is designed to work with common network printing protocols used across Windows, macOS, and Linux environments. When combined with the printer’s built‑in capabilities, this setup supports LPR/LPD and RAW (Port 9100) printing, enabling straightforward integration with existing print workflows and standard driver configurations.
• Simple deployment, low maintenance, and scalable use: Because it is an internal module, there’s no external device to manage or connect. It sits directly in the printer, reduces cable clutter, and provides centralized network access for the printer fleet. As your printing needs grow, you can reuse the same approach across multiple Epson impact printers, enabling a scalable, enterprise‑grade solution without a costly upgrade path.

Technical Details of EpsonNet Type B Internal Ethernet Print Server

• Form factor: Internal Type B Ethernet print server module designed to install inside compatible Epson printers.
• Network interface: 10/100Base‑T Ethernet connection for fast, reliable LAN access.
• Printing protocols: Supports standard TCP/IP printing protocols, including LPR/LPD and RAW (Port 9100).
• IP addressing: DHCP and static IP configuration options to fit diverse network setups.
• Power: Powered by the printer; no separate power supply required.

How to install EpsonNet Type B Internal Ethernet Print Server

• Power down the printer and disconnect it from any network connections before starting installation to prevent any electrical or data line issues.
• Open the printer’s service or access panel to locate the Type B slot where the internal Ethernet print server module is designed to fit. Confirm compatibility with your specific Epson model to ensure a proper fit.
• Gently insert the Type B module into the slot until it seats securely. Some models may require a latch or connector alignment; follow your printer’s service guide for exact alignment instructions.
• Reconnect the printer to the network via an Ethernet switch or directly to a network port using a standard CAT5e/CAT6 cable. Ensure the network port is active and reachable from your IT environment.
• Power on the printer and access its onboard settings or the printer’s control panel to configure network options. Assign a static IP address or enable DHCP as preferred, and verify that the printer appears on the network by printing a configuration page or using a network discovery tool.
• On the workstation or server, add the printer using the standard TCP/IP port, selecting LPR or RAW as the protocol based on your network setup. If needed, specify a queue name (for LPR) or the RAW port (9100) and complete the driver installation according to your operating system’s guidelines.
• Print a test page from a client computer to verify successful communication, correct queue handling, and correct form alignment. If the test page prints successfully, your networked Epson impact printer is ready for everyday use.

Frequently asked questions

• What is the EpsonNet Type B Internal Ethernet Print Server? It is an internal network module designed to connect Epson impact printers directly to a wired Ethernet network, enabling shared printing without needing a separate PC‑based print server.
• Which printers are compatible with this Type B module? The module is intended for Epson printers that support the Type B internal print server interface. Check your printer’s service or user guide to confirm compatibility before purchasing.
• Do I need drivers to print over the network with this unit? In most cases, standard TCP/IP printing through LPR or RAW protocols works with minimal driver requirements. You will typically install the printer on client computers using the manufacturer’s driver, or use a generic driver with the appropriate TCP/IP port settings.
• Can I use DHCP, or do I need a static IP for my printer? Both options are supported. DHCP can simplify onboarding devices, while a static IP provides predictable addressing and easier queue management in production environments.
• Is there a web interface or management tool for this print server? As an internal module, configuration is typically performed via the printer’s built‑in controls and the local network’s print setup. Some models may offer basic configuration options through the printer’s control panel or a remote management page accessible through the printer’s IP address.