Epson Lamp ELPLP92 for EB-69x/14x Projectors — 268W Replacement Lamp

The Epson Lamp ELPLP92 is the official replacement lamp designed specifically for Epson EB-69x and EB-14x projectors. Engineered to restore brightness, clarity, and color accuracy, this 268W lamp delivers cinema-grade visuals with dependable performance. Whether you’re refreshing a busy classroom display, a corporate presentation setup, or a home theater, ELPLP92 brings your images back to life with vivid colors, sharp details, and consistent luminance. Built by Epson to meet strict safety and performance standards, this lamp is designed for reliable operation, easy installation, and long-lasting brightness so you can focus on delivering impactful visuals without frequent downtime.

• Optimized compatibility: Specifically engineered as a direct-fit replacement for Epson EB-69x and EB-14x projectors, ensuring a seamless swap without compatibility concerns or recalibration hassles after installation.
• Bright, vivid imaging: The 268W lamp delivers strong brightness with accurate color reproduction, enabling clear presentations, crisp video playback, and detailed data visuals even in rooms with ambient light.
• Reliable longevity: Designed for stable output and sustained color fidelity over time, reducing the need for frequent lamp changes and helping keep operating costs predictable.
• Easy installation and maintenance: The lamp module is engineered for straightforward installation and simple maintenance, minimizing projector downtime and making replacements quick for IT staff or classroom technicians.
• Genuine Epson quality and warranty: This is an authentic Epson replacement lamp, backed by manufacturer quality assurance and compatibility with Epson warranty provisions for peace of mind.

Technical Details of Epson Lamp ELPLP92

• Model: ELPLP92
• Compatibility: EB-69x, EB-14x projectors
• Lamp Type: Replacement lamp module for projection system
• Lamp Wattage: 268W
• Estimated Lamp Life: Approximately 3,000–4,000 hours in Standard mode; up to 6,000 hours in Eco mode, depending on usage patterns and projector settings
• Color Temperature: About 6,500K for neutral white balance and accurate color rendition
• brightness range: Maintains strong brightness across its life with gradual depreciation managed by projector firmware
• Dimensions/Form Factor: Standard Epson lamp module geometry designed to fit EB-69x and EB-14x lamp housings

How to install Epson Lamp ELPLP92

Installing the ELPLP92 is a straightforward, manufacturer-approved process that can be completed with common tools in a few minutes. Follow these steps to replace your lamp safely and maximize the projector’s performance:

Step 1 — Power down and prepare: Turn off the projector and unplug the power cord. Allow the unit to cool completely before handling any internal components. This could take several tens of minutes, and touching hot surfaces can cause burns or damage to fragile components.

Step 2 — Access the lamp compartment: Locate the lamp cover on your EB-69x or EB-14x projector. Remove the cover by loosening the screws or latches as indicated in your user manual. Keep small screws in a safe place to avoid loss during replacement.

Step 3 — Remove the old lamp: Gently rotate the lamp module to release it from its socket. If any safety locks or retention tabs are present, disengage them slowly to avoid glass contact. Pull the lamp straight out to prevent damage to the connector.

Step 4 — Install the new ELPLP92: Carefully align the new lamp with the socket and slide it in until it seats firmly. Re-engage any locking mechanism and re-secure the lamp module with the screws you removed earlier. Avoid touching the lamp glass with bare fingers; oil from your skin can shorten lamp life.

Step 5 — Reassemble and power up: Replace the lamp cover and secure all fasteners. Reconnect the projector to power, turn it on, and allow it to initialize. The projector may run a brief lamp check or warm-up cycle—this is normal and ensures the lamp is functioning correctly.

Step 6 — Reset the lamp timer: Access the projector’s settings menu and reset the lamp usage timer to reflect the new lamp. This is essential for accurate maintenance reminders and to prevent false lamp-out warnings that could interrupt future usage.

Step 7 — Verify performance: Display a test pattern or a familiar video to confirm brightness, color balance, and uniform light distribution. If you notice any irregularities in color or brightness, re-check lamp seating and ensure the lamp cover is securely fitted.

Tips for best results: operate the projector in a well-ventilated area to prevent overheating, keep the air paths clear of dust, and schedule periodic cleaning of air filters to maintain thermal performance. If you use Eco mode, you’ll typically achieve extended lamp life at the expense of peak brightness, while Standard mode provides maximum luminance at a higher consumption rate.

Maintenance notes: always use a genuine replacement lamp to preserve image quality and projector warranty. Avoid third-party lamp components which can compromise performance and create safety risks. Proper disposal of old lamps should follow local regulations due to potential mercury content.

Frequently asked questions

• Q: Is the ELPLP92 compatible with EB-69x and EB-14x projectors? A: Yes. The ELPLP92 is the designated replacement lamp for Epson EB-69x and EB-14x models, designed to fit the lamp housing and power connections precisely as the original.
• Q: What brightness and lamp life can I expect? A: The lamp provides robust brightness suitable for classroom and home theater use. Typical life ranges from 3,000–4,000 hours in Standard mode and up to 6,000 hours in Eco mode, depending on usage, color settings, and environmental conditions.
• Q: Do I need to reset the lamp timer after installation? A: Yes. Resetting the lamp timer after replacement is recommended to maintain accurate usage data and to avoid unexpected warnings from the projector’s maintenance system.
• Q: Is this a genuine Epson lamp? A: Yes. The ELPLP92 is an authentic Epson replacement lamp, manufactured to meet all safety and performance standards required by Epson.
• Q: What safety precautions should I observe? A: Handle the lamp carefully, avoid touching the glass with bare hands, allow the unit to cool before handling, and dispose of the old lamp in accordance with local regulations. If you notice any cracks, unusual noises, or color distortions, discontinue use and consult a technician.