Extreme Networks Summit X460-G2 VIM-2ss: 2x RJ-45 10GBase-T Stacking Module

Engineered for performance, reliability, and scalable data networking, the Extreme Networks Summit X460-G2 VIM-2ss is a purpose-built Virtual Interface Module designed to enhance stacking and inter-switch connectivity in Summit X460-G2 deployments. This 2-port copper module leverages 10GBase-T technology to deliver fast, flexible interconnects using standard RJ-45 twisted-pair cabling. Ideal for enterprise campuses, data centers, and distributed networks, the VIM-2ss helps you maximize uplink bandwidth, simplify management, and optimize rack space without sacrificing reliability.

• Two 10GBase-T copper ports: The VIM-2ss provides two RJ-45 10GBase-T interfaces, delivering up to 10 Gbps of full-duplex bandwidth per port. This enables high-speed interconnects between Summit X460-G2 switches, supporting rapid data transfer, low latency, and efficient trunking across stacked devices. With copper cabling, you gain cost-effective, familiar infrastructure that scales with your network demands.
• Stacking-ready design for Summit X460-G2: Built specifically for the X460-G2 family, the VIM-2ss integrates seamlessly into stacking architectures. It enhances inter-switch connectivity, improves management visibility across a stack, and supports resilient, scalable network topologies suitable for edge, campus, and data-center applications.
• Low latency and high performance: By delivering dedicated 10GBase-T links between switches, this module helps minimize inter-switch latency while maximizing throughput. The VIM-2ss is designed to support bandwidth-intensive workloads, virtualization scenarios, and clustering requirements where predictable performance matters for service levels.
• Hot-swappable, maintenance-friendly design: The VIM-2ss is designed for non-disruptive maintenance in many configurations. It can be replaced or upgraded with minimal downtime, enabling you to keep critical networks online while performing routine hardware maintenance or capacity upgrades.
• Compact form factor for high-density deployments: The VIM-2ss occupies a compact slot in the Summit X460-G2 chassis, optimizing rack density and reducing the physical footprint of your network. This space efficiency is especially valuable in data centers and distributed environments where every rack unit counts.

Technical Details of Extreme Networks Summit X460-G2 VIM-2ss

• Specifications are available from the official Synnex product listing using the UPC or SKU as reference. For exact data such as power requirements, compatibility notes, and environmental operating ranges, please consult the specifications section on the Synnex site corresponding to your product SKU.

how to install Extreme Networks Summit X460-G2 VIM-2ss

Install the VIM-2ss module with attention to safety, ESD precautions, and proper chassis procedures. The steps below outline a typical installation path for a Summit X460-G2 chassis equipped with VIM slots. Always refer to your organization’s change control and vendor documentation for model-specific guidance.

• Step 1: Power down procedures and safety — If your environment permits, enable maintenance mode or schedule a controlled outage. Power down the chassis according to your data center’s electrical safety guidelines to protect personnel and equipment.
• Step 2: Access the chassis and locate the VIM slots — Identify the slot dedicated to the Summit X460-G2 VIM-2ss module. Check the chassis backplane and interconnect alignments to ensure proper seating of the module.
• Step 3: Align and insert the VIM-2ss — With care, align the module’s edge connectors with the slot, ensuring even pressure and a full seating without bending pins. Push gently until the module is firmly seated and the retention mechanism (if present) latches securely.
• Step 4: Secure and verify — If the chassis requires screws or retention hardware, fasten them following the chassis manual. Reinstall any covers, reconnect power, and allow the system to complete POST or health checks.
• Step 5: Configure the interfaces — After the device boots, access the management interface to verify port status, enable 10GBase-T interfaces if needed, and configure stacking or link aggregation as required by your network design. Confirm that both RJ-45 ports are up and functioning as intended.

Frequently asked questions

• What is the Extreme Networks Summit X460-G2 VIM-2ss? It is a dual 10GBase-T interface module designed for the Summit X460-G2 chassis family, enabling high-speed copper interconnects between stacked switches with 2 x RJ-45 ports.
• How many ports does the VIM-2ss provide? The module provides two 10GBase-T ports, allowing high-bandwidth copper links between X460-G2 switches and supporting flexible network topologies.
• Is the VIM-2ss hot-swappable? Yes. The VIM-2ss is designed for hot-swapping in compatible chassis configurations, enabling maintenance without complete system downtime in many scenarios. Always follow your maintenance procedures and vendor guidance.
• Can the VIM-2ss be used for non-stacking uplinks? The VIM-2ss is optimized for stacking interconnects within the Summit X460-G2 ecosystem, but it can be configured for direct inter-switch links or specific topologies as part of your data-network design. Verify compatibility with your topology and switch management policies.