Extreme Networks Summit X670-G2-48x-4q Layer 3 Switch

Extreme NetworksSKU: 7194318

Price:
Sale price$29,556.03

Description

Extreme Networks Summit X670-G2-48x-4q Layer 3 Switch

The Extreme Networks Summit X670-G2-48x-4q Layer 3 Switch is engineered to deliver exceptional density, performance, and reliability for modern data centers, enterprise campuses, and cloud-ready networks. Built in a compact 1U form factor, this switch brings together high-capacity 10 Gigabit Ethernet and 40 Gigabit Ethernet connectivity with robust Layer 2 and Layer 3 features. Designed to minimize latency and maximize throughput, the Summit X670-G2-48x-4q is ideal for deployments that demand scalable routing, rapid packet forwarding, and efficient traffic management. Whether you’re consolidating workloads, expanding a private cloud, or building a resilient campus core, this switch provides the foundation for flexible, future-proof networking. Its IPv4 and IPv6 unicast routing capabilities, along with smart QoS and security controls, help ensure predictable performance for mission-critical applications and services.

  • High-density port configuration with 48 front-panel ports and four high-speed uplink ports, delivering 10 GbE and 40 GbE connectivity in a compact 1U chassis.
  • Low-latency, cut-through forwarding that minimizes forwarding delays and supports real-time applications, big data workflows, and analytics platforms.
  • Full Layer 2 and Layer 3 capabilities, including IPv4 and IPv6 unicast routing for efficient inter-VLAN routing and scalable network design.
  • Advanced traffic management with quality of service (QoS), ACLs, and policy-driven routing to protect critical workloads and optimize application performance.
  • Flexible deployment options for data centers, cloud-enabled environments, and campus networks, with a design focused on scalability and future growth.

Technical Details of Extreme Networks Summit X670-G2-48x-4q Layer 3 Switch

  • Port density: 48 front-panel ports capable of high-density 10 GbE and 40 GbE connectivity, plus 4 uplink ports for aggregation and inter-switch links.
  • Form factor: 1U rack-mountable switch designed for dense data center and campus core deployments.
  • Forwarding: Low-latency, cut-through switching intended to accelerate traffic paths and improve time-sensitive application performance.
  • Routing: Layer 2 and Layer 3 switching with IPv4 and IPv6 unicast routing support for scalable network segmentation and efficient inter-network communication.
  • Management and automation: Built to integrate with standard network management frameworks and automation workflows, enabling streamlined provisioning and ongoing operations.
  • Deployment flexibility: Suitable for a range of environments from small-to-mid size data centers to large-scale enterprise networks, with a design that supports growth and evolving workloads.

how to install Extreme Networks Summit X670-G2-48x-4q Layer 3 Switch

To install the Summit X670-G2-48x-4q and begin delivering high-performance networking, follow a structured setup that ensures proper cabling, management access, and secure operation. Start with a clear rack-plan and a cooling assessment to maintain optimal operating temperatures in your data center or network room. The following steps provide a practical, high-level installation guide that aligns with common deployment workflows while avoiding vendor-specific command syntax.

  • Rack and physically mount: Place the switch in a standard 19-inch rack, securing it with the provided rails and hardware. Ensure there is adequate clearance around the chassis for airflow and maintenance access.
  • Power and environmental readiness: Connect the power supply to a reliable power source and verify that the ambient temperature and airflow meet the switch’s operational requirements.
  • Management access configuration: Connect a management interface or console to establish initial network access. Configure a management IP address, subnet mask, and gateway so administrators can reach the device remotely.
  • Network cabling: Attach the 48 front-panel ports to the appropriate network fabrics using suitable copper or fiber transceivers, following your design for leaf-spine, aggregation, or edge connections. Connect the four uplink ports to core or distribution switches as required.
  • Initial software and basic configuration: Boot the switch and perform any recommended firmware updates to the latest stable version. Apply a baseline configuration that defines management IPs, VLANs, routing preferences, and security policies. Validate connectivity by testing inter-VLAN routing and key paths across the fabric.
  • Security and monitoring: Enable essential security features, configure access controls and authentication mechanisms, and establish monitoring through your preferred management tools. Set up logging, SNMP traps if desired, and baseline performance checks to confirm the environment meets SLA targets.
  • Operational handoff: Document the final configuration, backups, and failover considerations. Schedule regular maintenance windows for firmware updates and periodic health checks to keep the network performing at peak levels.

Frequently asked questions

  • What is the Summit X670-G2-48x-4q? It is a high-density, Layer 3 switch from Extreme Networks designed for data centers and campus networks, featuring a 1U form factor with 48 front-panel ports and four high-speed uplink ports to support dense 10 GbE and 40 GbE connectivity, low-latency forwarding, and IPv4/IPv6 routing capabilities.
  • What are the primary use cases? The switch is suited for data center spine/leaf deployments, campus core aggregation, private cloud networks, and any environment that requires scalable Layer 2/3 switching with high port density and efficient routing.
  • Does it support IPv6? Yes. The device includes IPv4 and IPv6 unicast routing support, enabling modern, dual-stack networks and proper inter-network communication in multi-vendor environments.
  • What form factor and density does it offer? It comes in a compact 1U chassis with 48 front-panel ports and four uplink ports, delivering high-density connectivity without occupying excessive rack space.
  • How do I install and configure it? A typical process includes mounting the switch in a rack, connecting management interfaces, cabling front-panel ports to the network, performing firmware updates, and applying an initial configuration that covers management IPs, VLANs, and routing settings. Ongoing administration is handled through standard management tools and automation approaches.
  • What features enhance performance and security? The switch provides low-latency forwarding, Layer 2/3 routing with IPv4/IPv6 support, advanced QoS, and policy-based controls to optimize critical workloads while maintaining security and segmentation across the network.

Customer reviews

(0)

0 Out of 5 Stars


5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0


Showing - Of Reviews


You may also like

Recently viewed