Description
Finisar 10Gb/s, 2/10km Single Mode, Multi-Rate SFP+ Transceiver
Upgrade your high-speed network with Finisar’s FTLX1472M3BCL 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceiver. Engineered for reliability and versatility, this module delivers seamless 10 Gigabit performance across multi-rate links, supporting links up to 10 kilometers on G.652 single-mode fiber. Built to meet rigorous industry standards, it’s a robust choice for data centers, campus networks, and telecom backbones that demand scalable, future-ready fiber connectivity.
- High-performance 10 Gb/s capability with multi-rate flexibility enables smooth integration into existing 10G networks and future upgrades, reducing the need for expensive overhauls while preserving investment. This transceiver is designed to accommodate evolving traffic patterns, making it ideal for data centers that must adapt to changing workloads without compromising link quality.
- Long-reach capability up to 10 km on standard G.652 single-mode fiber gives you a reliable, future-proof solution for inter-building connections, campus backbones, and remote data-center links. The extended reach helps minimize the need for repeaters or intermediate regeneration, simplifying network design and maintenance.
- Compact SFP+ form factor ensures broad compatibility with a wide range of network switches, routers, and multiplexer platforms. The hot-swappable module design reduces downtime during maintenance or upgrades and supports scalable, modular deployments in dense rack environments.
- Comprehensive compliance with multiple industry standards — SFF-8431, SFF-8432, ITU-T G.693 VSR2000-2R1, SDH I-64.1, and OTN P1I1-2D1 (up to 2 km) — guarantees interoperability across vendor ecosystems and adherence to network engineering best practices, easing integration into existing transport and hierarchical networks.
- Designed for reliability in carrier-grade networks, the Finisar transceiver emphasizes robust optical performance, thermal stability, and consistent operation across a range of environments. This makes it well-suited for data centers, enterprise networks, and service-provider backbones that require precision timing and dependable data delivery at scale.
Technical Details of Finisar 10Gb/s, 2/10km SFP+ Transceiver
- Product: Finisar FTLX1472M3BCL 10 Gb/s Enhanced SFP+ Transceiver
- Data rate: 10 Gb/s
- Reach: Up to 10 km over G.652 single-mode fiber (SMF)
- Fiber type: Single-mode fiber (SMF)
- Form factor: SFP+ hot-swappable transceiver
- Wavelength: Nominally aligned with standard 10 Gb/s single-mode optics (typical 1310 nm LR/SR families); exact wavelength is optimized for compatibility with 10GBASE-LR/LR multi-rate ecosystems
- Compliance: SFF-8431, SFF-8432; ITU-T G.693 VSR2000-2R1; SDH I-64.1; OTN P1I1-2D1 (up to 2 km)
- Manufacturer: Finisar
- Package: SFP+ transceiver module designed for standard fiber-optic networking hardware
- Intended use: Multi-rate 10G links for data centers, enterprise networks, campus networks, and service-provider infrastructure
How to Install Finisar 10Gb/s SFP+ Transceiver
- Confirm compatibility: Verify that your switch, router, or network device supports SFP+ modules and 10 Gb/s operation, and that the device’s firmware is up to date for optimal interoperability with Finisar FTLX1472M3BCL.
- Power down or follow hot-swap procedures: If your equipment supports hot-swapping, you may insert or remove the SFP+ module without powering down the chassis. If hot-swap is not supported, power down the device before installation.
- Insert the transceiver: Gently insert the Finisar FTLX1472M3BCL into an available SFP+ slot in the network device. Ensure it seats firmly with a positive click and that the module’s latch is secured, preventing accidental removal.
- Connect the fiber: Attach the single-mode fiber cable with the appropriate LC connector to the transceiver. Verify correct polarity (Tx to Rx) and be mindful of connection cleanliness. Use an optical cleaning kit if necessary to ensure a pristine optical surface for optimal signal integrity.
- Power on and verify link: Power up the network device (or monitor the link status if hot-swapping). Check the device management interface for an active link status, negotiated data rate, and SFP+ recognition. Run a basic throughput test or loopback check to confirm proper operation.
- Troubleshoot if needed: If the link does not come up, recheck the SFP+ compatibility, fiber polarity, and connectors. Confirm that the correct SR/LR mode is being used by both ends of the link and consult device logs for any diagnostic codes or mismatch notifications.
Frequently asked questions
- Q: What is the maximum reach of this transceiver on standard fiber? A: It supports multi-rate links up to a maximum of 10 kilometers over G.652 single-mode fiber, enabling long-haul connections between data centers and network nodes with minimal equipment.
- Q: Which standards does the Finisar FTLX1472M3BCL comply with? A: It is compliant with SFF-8431 and SFF-8432 specifications, ITU-T G.693 VSR2000-2R1, SDH I-64.1, and OTN P1I1-2D1 (up to 2 km for certain OTN configurations), ensuring broad interoperability and adherence to industry best practices.
- Q: Is this transceiver backward compatible with older 10G equipment? A: Yes, the Finisar FTLX1472M3BCL is designed to work in standard 10GBASE-LR/LR-like multi-rate environments when used with compatible SFP+ capable devices and proper firmware support.
- Q: What fiber type should be used with this transceiver? A: Single-mode fiber (G.652) is required to achieve the stated reach and performance. Ensure proper fiber cleanliness and connector quality for reliable operation.
- Q: How do I know if the installation was successful? A: Look for an active link indicator, a negotiated 10 Gb/s data rate, and stable optical performance in your device’s management interface. If issues arise, verify compatibility, swap fiber ends, and confirm the transmitter/receiver pair is appropriate for the desired link.
- Q: Can this module be used for OTN or SDH networking beyond basic Ethernet? A: Yes, the module is compatible with SDH and OTN configurations as outlined in the supporting standards, enabling integration into multi-service networks that require layered transport capabilities.
Customer reviews
Showing - Of Reviews