GefenGTV-DIGAUDT-141 GefenTV Digital Audio Translator

The GefenTV Digital Audio Translator is a compact, high-fidelity digital audio bridge designed to simplify complex AV setups. It accepts a digital audio signal from sources that use either coaxial S/PDIF or optical TOSLINK, and it passes that signal to two destinations at the same time. Whether you’re upgrading a home theater, integrating a gaming rig with a sound system, or aligning legacy gear with modern receivers, this small box delivers a clean, reliable digital audio path without requiring complicated configuration or drivers. Its dual-output design ensures you can drive a high-quality AV receiver, a dedicated DAC, a soundbar, or a secondary speaker setup from a single source, all while preserving the integrity of the original digital signal. In short, it’s the practical, plug-and-play solution you need to unify coaxial and optical ecosystems in one streamlined device.

• The GefenTV Digital Audio Translator offers flexible input and dual-output functionality, letting you pull digital audio from a source using either coaxial S/PDIF or optical TOSLINK and then split the signal to two destinations. This makes it ideal for users who need to connect devices that may only support a single interface, without sacrificing audio fidelity or requiring multiple adapters. Its compact footprint makes it easy to tuck into an AV rack or behind a TV setup, so it stays out of sight while delivering big-performance results.
• Dual simultaneous outputs ensure your audio can be delivered to two destinations at once: one coaxial (RCA) and one optical (TOSLINK). This is perfect for feeding an AV receiver while also routing the same digital signal to another device like a DAC or soundbar that accepts the alternative interface. By maintaining synchronous output on both paths, you get consistent audio timing and alignment across your gear, which is especially valuable for movie playback and immersive gaming experiences.
• Built for reliability and signal integrity, the GefenTV Digital Audio Translator preserves the digital signal as it travels from source to destinations. Built with a dedicated, hardware-based path, it minimizes jitter and preserves the original data stream, so you experience accurate tone, dynamic range, and clean detail. This makes it an excellent choice for demanding audio setups where clarity and fidelity are paramount, from cinematic soundtracks to fast-paced game audio.
• Versatility meets simplicity in a plug-and-play design. There are no drivers to install and no complicated setup required. Connect a source via coaxial or optical, connect two destination devices via the respective outputs, power the unit, and you’re ready to go. The translator is compatible with a wide range of digital audio formats supported by S/PDIF and TOSLINK infrastructures, so you can enjoy broad compatibility across Blu-ray players, game consoles, streaming boxes, PCs, and other digital audio sources.
• Targeted for home theaters, multi-room audio systems, and professional AV displays, the GefenTV Digital Audio Translator provides a practical bridge between disparate components. Whether you’re upgrading an older receiver that only has coaxial inputs, or you want to feed a modern DAC and a traditional AV receiver at the same time, this device keeps your signal clean, synchronized, and ready for the next step in your audio journey.

Technical Details of Gefen GTV-DIGAUDT-141

• Model: GefenTV Digital Audio Translator (GTV-DIGAUDT-141)
• Inputs: Coaxial S/PDIF or Optical TOSLINK
• Outputs: Coaxial (RCA) and Optical (TOSLINK), both active simultaneously
• Function: Digital audio translator and repeater/bridge
• Form factor: Compact, plug-and-play housing suitable for home theaters and professional setups
• Brand: Gefen
• SKU: GTV-DIGAUDT-141

How to install Gefen GTV-DIGAUDT-141

Setting up the GefenTV Digital Audio Translator is straightforward and designed to be as painless as possible. Start by selecting your digital source—this can be a Blu-ray player, game console, streaming device, or media player—that outputs digital audio via coaxial S/PDIF or optical TOSLINK. Connect the chosen cable to the corresponding input on the translator. Next, decide where you want the audio to go: connect one device to the coaxial output and another to the optical output, or use a single destination if that’s your preference. The dual outputs will carry the same digital signal in parallel, so you can pair a traditional AV receiver with a separate DAC or a soundbar that prefers the optical interface without reconfiguring your source. Finally, ensure all devices are powered and set to receive digital audio on the appropriate input. Because this is a hardware-based, plug-and-play solution, no software or drivers are required—simply connect, power, and enjoy high-fidelity digital audio transmission with synchronized output.

Tips for optimal performance: use high-quality cables to minimize potential interference on longer runs, keep cables away from power cords to reduce noise, and verify that your source is configured to output digital audio in a compatible format for both connected destinations. If you experience lip-sync concerns or discontinuities, check the source settings and ensure the two output devices are configured to accept the same audio format. The GefenTV Digital Audio Translator is designed to be highly reliable across common home theater configurations and is an excellent companion for complex audio paths where interface compatibility is a bottleneck.

Frequently asked questions

• Q: What does the GefenTV Digital Audio Translator do?

  A: It accepts digital audio input via coaxial S/PDIF or optical TOSLINK and outputs the signal through both coaxial and optical connections simultaneously, acting as a translator and repeater when needed.

• Q: Can it pass multi-channel audio?

  A: It passes digital audio signals; whether multi-channel audio is supported depends on the source and destination devices. It serves as a bridge rather than a decoder or renderer.

• Q: Does it require software or drivers?

  A: No software or drivers are required; it is a plug-and-play, hardware-based digital audio converter.

• Q: Can I use it to extend the distance of my audio signal?

  A: Yes. The unit can function as an audio repeater, enabling longer cable runs between source and destination devices while preserving signal fidelity.

• Q: What devices is it suitable for?

  A: It’s ideal for home theaters, gaming rigs, PCs, Blu-ray players, streaming devices, DACs, soundbars, and AV receivers that support coaxial or optical digital inputs/outputs.