GeoVision GV-POC0100 1-Port BNC PoE over Coaxial Extender

GeoVisionSKU: 5873122

Price:
Sale price$227.50

Description

GeoVision GV-POC0100 1-Port BNC PoE over Coaxial Extender

The GeoVision GV-POC0100 is a high-performance, compact solution engineered to power and network IP cameras over existing coaxial wiring. This 1-Port 10/100BaseT(X) PoE/PoE+ PD and 1-Port BNC PoE over Coax Extender Transmitter/Receiver enables you to extend Ethernet and deliver PoE across a RG1 coaxial cable up to 230 meters (754.6 feet). Perfect for retrofitting surveillance systems or deploying cameras in challenging locations where running new Ethernet cables would be costly or impractical, the GV-POC0100 combines reliable data transmission with flexible power delivery, all over a single coaxial run. By leveraging PoE over coax, installers can minimize cable clutter, reduce installation time, and maximize coverage without compromising performance or security. The device is designed to integrate smoothly with GeoVision ecosystems and a wide range of IP cameras that support PoE, delivering a robust, scalable solution for modern security deployments.

  • 1-Port 10/100BaseT(X) PoE/PoE+ PD capability on the Ethernet side, enabling power delivery to IP cameras and other PoE-enabled devices from a PoE switch or injector.
  • 1-Port BNC PoE over Coax Extender Transmitter/Receiver that utilizes existing RG1 coaxial cable to carry both data and power, reducing the need for new network cabling.
  • Extends IP Ethernet transmission and injects power over coaxial cable up to 230 meters (754.6 feet), making long-range camera placement feasible without compromising performance.
  • Supports PoE and PoE+ PD, delivering compatibility with a wide range of IP cameras and network devices, while maintaining stable data rates at 10/100 Mbps.
  • Simple, plug-and-play installation with minimal configuration, ideal for retrofits, expansion of existing surveillance systems, and scalable security infrastructure.

Technical Details of GeoVision GV-POC0100

  • Transmission: 10/100BaseT(X) PoE over coax with dedicated BNC extension port
  • Ports: 1 x RJ-45 PoE input; 1 x BNC coaxial extender port
  • PoE support: PoE/PoE+ PD capable on Ethernet side
  • Distance: Up to 230 m (754.6 ft) over RG1 coax
  • Coax type: RG1

How to install GeoVision GV-POC0100

  • Plan camera placement and verify that the coaxial run using RG1 supports a length up to 230 meters (754.6 feet) from the Transmitter to the Receiver.
  • Connect a PoE-enabled network source (switch or PoE injector) to the Transmitter’s 1-Port RJ-45 PoE input to supply data and power.
  • Run the RG1 coaxial cable from the Transmitter to the Receiver location, ensuring secure routing and protection from physical damage.
  • At the Receiver end, connect the IP camera to the Receiver’s Ethernet output port (the device will deliver PoE to the camera over the coax link).
  • Power on the system, configure network settings for the camera (IP address, gateway, DNS as required), and test video, power delivery, and stability across the extended link.

Frequently asked questions

  • Q: Can the GV-POC0100 extend IP cameras over existing coax? A: Yes. It is designed to transmit Ethernet data and PoE over RG1 coax, enabling remote camera placement up to 230 meters away.
  • Q: What is the maximum distance supported? A: Up to 230 meters (754.6 feet) over RG1 coax, depending on installation conditions and cable quality.
  • Q: Which PoE standards are supported? A: The device supports PoE/PoE+ PD on the Ethernet side, allowing compatibility with standard PoE power sources and cameras.
  • Q: Do I need an external power supply for the remote camera? A: No additional power supply is required on the remote end if your PoE switch or injector provides PoE power through the transmitter.
  • Q: Is the GV-POC0100 compatible with most IP cameras? A: It supports 10/100BaseT(X) PoE-enabled cameras and PD devices; verify your camera’s PoE requirements and network compatibility for best results.
  • Q: Can I use this extender for non-surveillance Ethernet devices? A: While designed for PoE-enabled IP devices, it can extend other compatible PoE devices within the 10/100 Mbps bandwidth constraints of the system.

With the GeoVision GV-POC0100, you gain a flexible, cost-effective path to expand your surveillance footprint without disrupting existing infrastructure. The combination of PoE over coax and BNC-based transmission makes it suitable for temporary deployments, retrofits to aging CCTV systems, or new installations where coax already runs to remote camera locations. This extender is engineered to deliver reliable performance in real-world environments, maintaining data integrity and consistent power delivery across the entire link. Whether upgrading a single camera or planning a broader network expansion, the GV-POC0100 provides a practical solution that aligns with modern IP security practices while leveraging the convenience of coaxial cabling you already have in place. Its design emphasizes compatibility, ease of installation, and straightforward maintenance, which translates into lower total cost of ownership and faster deployment times for security professionals.


Customer reviews

(0)

0 Out of 5 Stars


5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0


Showing - Of Reviews


You may also like

Recently viewed