HPE 1.8TB SAS 10K SFF DS HDD — Enterprise 2.5-Inch Storage

Meet the Hewlett Packard Enterprise HPE 1.8TB SAS 10K SFF DS HDD, a robust enterprise hard disk drive designed for demanding data center workloads. Built to deliver reliable performance in server backplanes and storage arrays, this 2.5-inch SAS HDD combines a high 1.8 TB capacity with a 10,000 RPM spindle speed to accelerate I/O operations, reduce latency, and improve overall system throughput. Optimized for virtualization, databases, large-scale backups, and mission-critical applications, this drive is engineered to sustain steady workflow under heavy read/write demands while maintaining consistent service levels in multi-user environments.

• High-capacity, high-speed performance: With 1.8 TB of storage and a 10,000 RPM spindle speed, this HDD is designed to deliver faster random I/O and sustained throughput for leading-edge data center workloads, helping you meet tight SLAs and reduce bottlenecks in virtualized environments.
• Enterprise-grade reliability and endurance: Built for 24/7 operation in enterprise servers and storage systems, this drive emphasizes robust reliability, steady seek times, and long-term endurance to support continuous operation in demanding data-center ecosystems.
• 2.5-inch SFF form factor for dense deployments: The compact 2.5-inch Small Form Factor (SFF) design allows greater rack density and easier integration into blade servers, backplanes, and hot-swap drive bays, maximizing your storage footprint without sacrificing capacity.
• SAS interface with 512e sector size: Serial Attached SCSI (SAS) provides high-speed, dual-port ready connectivity with a 512e sector size, enabling compatibility with modern enterprise backplanes and optimized data transfer in enterprise workloads.
• Seamless integration with HPE ecosystems: Designed to work with Hewlett Packard Enterprise servers and storage solutions, this HDD enhances the reliability and performance of HPE environments, backed by professional support and service options from HPE for peace of mind in production settings.

Technical Details of Hewlett Packard Enterprise Hpe 1.8tb Sas 10k Sff Sc 512e Ds Hdd

• Capacity: 1.8 TB
• Interface: SAS (Serial Attached SCSI)
• Form Factor: 2.5 inch Small Form Factor (SFF)
• Rotation Speed: 10,000 RPM
• Sector Size: 512e
• Drive Type: Enterprise Hard Disk Drive (HDD)

how to install Hewlett Packard Enterprise Hpe 1.8tb Sas 10k Sff Sc 512e Ds Hdd

Installing this enterprise HDD is straightforward when you follow standard server maintenance procedures. Before handling the drive, power down the host system, unplug from power, and discharge any static. Use proper anti-static precautions and wear a grounded wrist strap if available. Remove the server chassis cover or open the drive bay cage to access the backplane or hot-swap tray. Align the drive with the backplane connector inside the drive bay, ensuring that the SAS interface engages fully and the drive seats securely in the cage or sled. If your system uses tool-less drive trays, slide the HDD into the bay until it latches; if screws are required, secure the drive using the appropriate screws provided with your drive cage. Reattach the drive bay cover and reconnect power and data cables. Power on the system and enter the server’s management interface or BIOS to confirm the drive is detected, then initialize or format the disk as needed for your workload. For hot-swap capable systems, this drive can be replaced without powering down the entire server, minimizing downtime in production environments. After installation, run SMART checks and verify health status through your server management tools to ensure optimal operation and to catch early signs of wear or failure. If you’re integrating into a RAID array, configure the desired RAID level and verify rebuild times and parity health as part of routine maintenance. Finally, document the drive’s serial information and capacity in your asset management system to maintain accurate inventory for service and support.

Frequently asked questions

• Q: What is the capacity of this drive? A: It offers 1.8 TB of storage, suitable for dense data storage requirements in enterprise environments.
• Q: What interface does the drive use? A: The drive uses a SAS interface, which is common in data-center backplanes and enterprise servers for high throughput and reliability.
• Q: What form factor is the HDD? A: It is a 2.5-inch Small Form Factor (SFF) drive, designed for compact, high-density server and storage deployments.
• Q: What is the rotational speed? A: The drive spins at 10,000 RPM to deliver faster read/write operations and lower latency compared with lower RPM HDDs.
• Q: Is the sector size compatible with modern systems? A: Yes, the 512e sector size is designed to be compatible with modern operating systems and storage backplanes that support 4K sector addressing, providing efficient data management and performance.