HPE 2930F 48G PoE+ 4SFP+ 740W Switch

The Aruba HPE 2930F Switch Series delivers powerful, scalable connectivity designed for modern digital workplaces where mobility and collaboration drive productivity. This 48-port PoE+ switch combines enterprise-grade Layer 3 features with simple plug‑and‑play deployment, robust security, and centralized management options. Built to support a growing network of IP phones, wireless access points, cameras, and edge devices, the 2930F 48G PoE+ 4SFP+ 740W Switch is the backbone for clean campus networks, branch offices, and high-density deployments. With ArubaOS-Switch at its core, it blends easy administration with advanced policy controls, ensuring reliable performance for today’s mobile users and tomorrow’s expanding IoT footprint. Whether you’re upgrading an aging campus switch or building a new digital workplace, this switch provides the power, speed, and security you need to keep users connected, productive, and secure.

• High‑density PoE+ power for today’s devices: 48 Gigabit Ethernet ports with IEEE 802.3af/at PoE+ support and a total PoE budget up to 740W. Run IP phones, security cameras, wireless access points, and other PoE devices directly from the switch, simplifying cabling and powering your edge devices from a single, centralized location.
• 4 SFP+ uplink ports for fast, scalable aggregation: Four 1G/10G SFP+ uplinks give you flexible aggregation to the core network or to high‑speed servers. Configure link aggregation (LACP) for increased bandwidth and redundancy, or dedicate uplinks for critical data paths to ensure consistent performance under load.
• Layer 3 capabilities for smarter routing at the edge: Built-in Layer 3 static routing with optional dynamic routing support, IPv6/IPv4 routing, and a rich set of routing and ACL features. This enables efficient inter‑VLAN routing, scalable network segmentation, and improved traffic control at the access layer.
• Security and policy integration for enterprise-grade protection: Advanced security features including 802.1X authentication, DHCP snooping, IP source guard, and robust ACLs help defend against common network threats. When paired with Aruba ClearPass and Aruba Central, you gain centralized policy management and secure onboarding for all edge devices.
• Management simplicity with Aruba’s cloud and on‑prem solutions: Seamless integration with Aruba AirWave for on‑prem monitoring, Aruba Central for cloud‑based management, and compatibility with Aruba’s policy and security ecosystem (ClearPass, Central, AirWave), delivering unified visibility, easy firmware updates, and proactive network health insight.

Technical Details of HPE 2930F 48G PoE+ 4SFP+ 740W Switch

• Ports and PoE: 48 x 10/100/1000 (RJ-45) Ethernet ports with PoE+ (IEEE 802.3af/at) to power IP phones, cameras, and wireless APs; total PoE budget up to 740W.
• Uplinks: 4 x SFP+ ports for high‑speed uplink/aggregation (supporting 1G/10G fiber transceivers and linking to core or distribution switches).
• Performance and routing: Layer 3 capable with static routing and support for dynamic routing protocols (as implemented by the platform), IPv4 and IPv6; robust ACLs, QoS, and traffic management to optimize performance for business apps and voice/video workloads.
• Security features: Enterprise‑grade security including 802.1X, DHCP snooping, IP source guard, port security, and access control lists to segment traffic and enforce policies at the edge.
• Management and interoperability: Managed through ArubaOS‑Switch with compatibility for Aruba AirWave (on‑prem) and Aruba Central (cloud). Supports centralized monitoring, configuration backup, firmware updates, and policy-driven management across the campus.
• Form factor and power: Rack‑mountable 1U chassis with a 740W PoE budget; designed for reliable operation in typical data center or campus distributions, with an emphasis on energy efficiency and quiet operation in office environments.

how to install HPE 2930F 48G PoE+ 4SFP+ 740W Switch

Installing the HPE 2930F switch is a straightforward process that minimizes downtime and gets your network ready for immediate use. Start with proper planning to ensure optimal placement, cabling discipline, and future growth alignment.

• Plan and prepare: Determine the switch’s location in a well-ventilated equipment rack with stable power. Identify the PoE devices (phones, cameras, APs) that will connect to the switch and estimate total PoE consumption to verify the 740W budget will cover current and near‑term needs. Prepare the core network topology and decide which VLANs and routing policies will be configured at the edge.
• Physical installation: Mount the switch securely in a standard 19-inch rack. Verify clearance for airflow and ensure cable management supports easy maintenance. Connect to a dedicated, reliable power source to support PoE loads and system boot‑up stability.
• Initial network configuration: Connect a management workstation to the switch’s management interface or a dedicated management VLAN. Set a strong administrator password, configure a management IP address, and verify reachability from the network. Enable basic features like VLANs, PoE settings per port, and basic security policies.
• Uplinks and routing: Connect the SFP+ uplinks to the distribution or core network, then configure the desired routing behavior (static routes or dynamic routing if supported). Create appropriate VLANs for edge devices and assign ports accordingly. Configure QoS policies to prioritize voice and critical business applications as needed.
• Monitoring, security, and ongoing care: Enable monitoring through Aruba AirWave orCentral, set up syslog/ SNMP traps, and implement security policies (802.1X, DHCP snooping, IP source guard). Schedule firmware updates to maintain security and performance, and plan for periodic audits of port usage and PoE budgets to prevent over‑consumption.

Frequently asked questions

• Q: Does the HPE 2930F 48G PoE+ switch support PoE on all ports?

  A: The switch provides PoE+ support across its 48 Ethernet ports with a total PoE budget of up to 740W, allowing deployment of multiple PoE devices without separate power injectors. The exact PoE per-port power depends on device requirements and power management settings configured in the switch.

• Q: What uplink options are available?

  A: The switch includes 4 x SFP+ uplink ports, enabling flexible 1G/10G fiber connectivity. These uplinks can be used in standalone mode or aggregated with LACP for higher bandwidth and redundancy to the core or distribution layer.

• Q: Is Layer 3 routing supported?

  A: Yes. The HPE 2930F supports Layer 3 routing features, including static routing and IPv4/IPv6 routing. Depending on the specific model and firmware, you may also have access to dynamic routing protocols and ACLs for traffic control at the edge.

• Q: What management options are available for this switch?

  A: Aruba AirWave provides on‑prem management and visibility, while Aruba Central offers cloud‑based management for centralized configuration, monitoring, and policy enforcement. The switch integrates with Aruba’s security ecosystem (ClearPass) for policy‑driven onboarding and access control.

• Q: What security features can I rely on?

  A: The switch includes 802.1X authentication, DHCP snooping, IP source guard, and ACLs to protect against unauthorized access and malicious traffic. These features help maintain a secure edge suitable for mixed environments with VoIP, video conferencing, and IoT devices.

• Q: What kind of environments is the HPE 2930F best suited for?

  A: It's ideal for mid‑to‑large offices, digital campuses, and deployments where mobile workers, cloud applications, and IoT devices demand reliable, scalable edge switching with centralized management and robust security.