HPE B-Series 16Gb SFP+SW Refurbished XCVR

Experience robust, cost-efficient fiber connectivity with the HPE B-Series 16Gb SFP+SW Refurbished XCVR. This high-performance transceiver is engineered for data networking and optical networks, delivering reliable fiber connectivity within HPE B-Series environments. Each unit is refurbished to OEM specifications, offering a smart solution for upgrades, spares, or capacity expansions without compromising network reliability.

• Designed for seamless HPE B-Series integration. This SFP+ SW transceiver is engineered to work harmoniously with Hewlett Packard Enterprise B-Series data networking gear. It supports interoperability across a wide range of HPE switches and optical networks, enabling straightforward upgrades and refresh cycles. The refurbished module has undergone meticulous testing to ensure signaling accuracy, electrical compatibility, and adherence to the original performance envelope, so your network maintains its reliability while you extend its life. Whether you’re refreshing an aging uplink, expanding a data center spine, or replacing a failed module, this XCVR is built to slot into place with minimal downtime.
• High-speed performance for modern data centers. With a 16Gb data-rate capability, this SFP+ transceiver is optimized for high-bandwidth workloads that require fast, reliable uplinks and inter-switch connectivity. It supports full-duplex transmission and low bit-error rates, delivering consistent throughput for storage area networks, virtualized workloads, and latency-sensitive applications. While exact fiber configurations and reach depend on your network design and the host equipment, you can count on dependable performance that aligns with enterprise-grade expectations for 16Gb SFP+ optical interfaces.
• Reliable refurbished hardware with OEM-grade testing. Refurbished by qualified technicians, this XCVR undergoes a thorough refurbishment workflow that includes cleaning, visual inspection, electrical testing, and optical testing to OEM standards. Each unit is restored to factory-like specifications where feasible, ensuring proper power handling, signal integrity, and compatibility with HP B-Series chassis. The refurbishment process is designed to provide a like-new experience at a fraction of the cost of a brand-new module, all while contributing to a more sustainable IT lifecycle by extending the usefulness of existing hardware.
• Flexibility and versatility for diverse deployments. This transceiver is suitable for a broad range of optical networks and data-center configurations. It supports common 16Gb fiber channel and high-speed Ethernet scenarios, enabling versatile uplinks, server-to-switch connections, and storage networking. The exact optical reach and fiber type requirements depend on the specific SKU and deployment context, but the module’s design emphasizes compatibility, ease of installation, and reliable operation across standard HP B-Series environments.
• Simple procurement, smart maintenance, and cost efficiency. By leveraging refurbished SFP+ transceivers, organizations can realize significant cost savings without sacrificing performance or reliability. The unit is ideal for project-based deployments, spare-part inventories, or routine hardware refresh cycles. It also helps reduce downtime and procurement lead times, particularly in large-scale data centers where maintaining a predictable maintenance budget is crucial. With good stock availability and compatibility within HPE ecosystems, you can plan upgrades with confidence and minimize disruption to critical services.

Technical Details of HPE B-Series 16Gb SFP+SW Refurbished XCVR

• Interface: SFP+ optical transceiver designed for 16Gb data-rate applications
• Data rate: Up to 16 Gbps (full-duplex operation within compatible host equipment)
• Compatibility: Optimized for HPE B-Series data networking gear; intended for use with compatible switches and routers
• Condition: Refurbished and tested to meet OEM performance standards
• Package contents: Transceiver module (model/SKU dependent); verify SKU details for any accessories or documentation

How to install HPE B-Series 16Gb SFP+SW Refurbished XCVR

Installing the HPE B-Series 16Gb SFP+SW Refurbished XCVR is designed to be straightforward in supported HP B-Series chassis. Before you begin, power down the affected device only if your chassis requires a cold swap; many HP SFP+ modules are hot-swappable, but always follow your equipment’s service manual. Steps to install typically include the following:

1) Prepare the work area: ensure you have a clean, static-free workspace and that you handle the module with proper ESD precautions. Keep fiber connectors clean to prevent contamination and minimize signal loss.

2) Locate the SFP+ slot: identify the correct console or uplink port on your HP B-Series switch or router that accepts a SFP+ module. Confirm that the chassis slot is available and that the module is the correct SKU for your device.

3) Align and insert: hold the transceiver by its edges, align the connector with the slot, and gently insert until it seats securely. Do not force the module; if it resists, remove and reinsert to ensure correct alignment and seating.

4) Connect fiber cable: attach the appropriate fiber optic cable to the transceiver, ensuring the connector is clean and the fiber is properly terminated. Avoid touching the ferrule tip, and use protective caps when connectors are not in use.

5) Verify link and configuration: power on the device (if required) and check the management interface or LED indicators for link activity and speed negotiation. Confirm the transceiver is recognized, the link is up, and the performance matches your expected 16Gb/s throughput. If a connection does not come up, reseat the module, inspect the fiber alignment, verify complementary hardware capabilities, and consult your vendor’s documentation for firmware compatibility and slot requirements.

Frequently asked questions

• Q: Is this a brand-new transceiver? A: No. It is a refurbished SFP+ SW XCVR that has been inspected, tested, and restored to meet OEM-like performance standards for cost-effective deployment in HPE B-Series networks.
• Q: What performance can I expect? A: The module supports high-speed data transfer up to 16 Gbps in compatible environments, delivering reliable uplinks, storage networking, and inter-switch connectivity for data centers and enterprise networks.
• Q: Which devices are compatible? A: It is designed for HPE B-Series data networking gear. Compatibility depends on the exact chassis model, firmware version, and the SKU. Always verify compatibility with your device’s documentation or vendor support matrix.
• Q: Do I need special tools to install? A: In most cases, no special tools are required beyond standard fiber optic cleaning supplies and ESD precautions. Modules are typically hot-swappable in supported chassis, but always follow the manufacturer’s installation guidelines.
• Q: What about warranty and returns? A: Warranty and return terms vary by seller. Please review the listing for the exact warranty period, coverage, and return policy before purchase.