HPE Instant On 10G SFP+ LC SR 300m OM3 MMF Transceiver

The HPE Instant On 10G SFP+ LC SR 300m OM3 MMF Transceiver is designed to deliver dependable, high-speed connectivity for modern data centers and enterprise networks. Engineered for optical networking applications, this 10GBASE-SR transceiver uses VCSEL technology to provide reliable short-range communication over multimode fiber (MMF) with LC duplex connectors. Built to meet industry standards and optimized for HPE Perfect for Instant On environments, it combines ease of deployment with robust performance to support growing bandwidth demands, backbone uplinks, and server-to-switch links. Whether you’re upgrading an aging infrastructure or implementing a new, scalable network, this transceiver offers a cost-effective, energy-efficient solution that minimizes downtime and simplifies maintenance while maximizing uptime.

• High-performance 10 Gigabit Ethernet transceiver designed for 850 nm signaling over multimode fiber, ensuring fast, reliable data transfer across data centers and enterprise networks.
• Supports short-range links up to 300 meters on OM3 MMF, making it ideal for rack-to-rack, cabinet-to-cabinet, and switch-to-switch connections within data centers.
• LC duplex optical connector for straightforward plug-and-play installation with standard SFP+ slots, enabling quick swaps and easy field upgrades.
• MSA-compliant, hot-pluggable SFP+ form factor that integrates seamlessly with a wide range of network hardware, including HPE Instant On switches and compatible 10G equipment.
• Energy-efficient design combines reliable performance with lower power consumption, helping you reduce operating costs while supporting high-density networks.

Technical Details of HPE Instant On 10G SFP+ LC SR 300m OM3 MMF Transceiver

• Product type: SFP+ transceiver module for 10GBASE-SR applications
• Wavelength: 850 nm VCSEL transmission
• Fiber type: Multimode OM3 optical fiber
• Reach: Up to 300 meters on OM3 MMF
• Connector: LC duplex (LC/LC) optical interface
• Data rate: 10 Gbps (10GBASE-SR)
• Form factor: SFP+ hot-pluggable module designed for network switches and routers with SFP+ ports
• Standards and compatibility: MSA-compliant; designed for compatibility with HPE Instant On products and other 10G-enabled equipment
• Operating conditions: Typical environmental specifications aligned with standard data center requirements; consult device documentation for exact temperature and humidity guidelines
• Power specifications: Low power consumption suitable for dense deployments (exact figures vary by vendor and platform)
• RoHS compliance: Yes, compliant with current environmental and safety standards

How to Install HPE Instant On 10G SFP+ LC SR 300m OM3 MMF Transceiver

• Verify compatibility: Ensure your switch, router, or network interface card supports 10GBASE-SR SFP+ modules and has an available SFP+ slot. Confirm that OM3 MMF fiber with LC duplex connectors is installed and terminated correctly.
• Prepare the fiber: Clean the LC connectors with a proper fiber cleaning kit to remove dust, oil, and residues. Inspect connectors for any damage or contamination that could degrade signal integrity.
• Insert the transceiver: Gently insert the HPE Instant On 10G SFP+ LC SR module into an appropriate SFP+ slot until it seats securely. Avoid excessive force; if the module does not seat, remove and reinsert with the latch engaged.
• Connect fiber: Attach the OM3 MMF LC duplex fiber to the transceiver, ensuring proper alignment and polarity. Secure the fiber ends to minimize movement and strain on the connectors.
• Power and configure: If the device supports auto-negotiation, enable 10G speed on the corresponding port. If necessary, apply the vendor-specific settings to activate the 10GBASE-SR mode and confirm link status.
• Test and validate: Check link lights on the switch and perform basic connectivity tests, such as pinging across the link or running a throughput test to verify stable performance at 10 Gbps.

Frequently asked questions

• What is the HPE Instant On 10G SFP+ LC SR 300m OM3 MMF Transceiver best for? This transceiver is ideal for short-range, high-speed links within data centers and enterprise networks, enabling fast uplinks between switches, servers, and storage devices over OM3 MMF fiber.
• What type of fiber does it require? It uses multimode OM3 fiber with LC duplex connectors, optimized for 850 nm signaling in 10GBASE-SR applications.
• What is the maximum reach on OM3 fiber? Up to 300 meters, making it suitable for intra-data-center connections and rack-to-rack deployments within standard building footprints.
• Is this transceiver compatible with non-HPE devices? Yes. As an MSA-compliant SFP+ module, it is designed to work with a wide range of 10G-capable switches and routers that support SFP+ SR optics; however, always verify vendor compatibility with your specific hardware model.
• Do I need special tools to install it? Generally no special tools are required beyond standard fiber cleaning supplies and typical IP/network configuration steps. Use care when handling fiber to avoid damaging connectors and always follow equipment manufacturer guidelines.
• Can I use this transceiver in live networks? Yes, it is designed to be hot-pluggable in compatible devices. For best results, ensure networks are configured correctly for 10G SR operation and perform installation during a maintenance window if possible.