HPE PoE Injector - 60 W

Meet the HPE PoE Injector, a compact and dependable power solution designed to simplify deployments and maximize the reach of your network. Delivering up to 60 watts of PoE power over a single Ethernet cable, this injector is ideal for powering high-demand devices such as IP cameras, wireless access points, VoIP phones, and other PoE-enabled equipment. Built for enterprise use, it combines reliable power delivery with smart, plug-and-play operation, helping you reduce wiring complexity and keep critical devices online without needing a full PoE switch in every location. Whether you’re outfitting a small office, a campus, or a retail space, this injector provides scalable power to support growing networks with minimal footprint and maximum flexibility.

• The HPE PoE Injector delivers up to 60 W of PoE power on a single port, enabling high-demand devices to operate efficiently without an additional inline power supply. This capability is especially valuable for deploying higher-powered access points, bigger IP cameras, or multi-sensor devices where power needs exceed standard PoE limits. With robust power delivery, you can place devices where they are most effective—without compromise—and reduce the number of separate power adapters you need to manage.
• Broad compatibility with common PoE standards ensures flexible device support. The injector is designed to work with PoE-enabled equipment that requires power through Ethernet, supporting devices that negotiate power via standard PoE profiles. By automatically adjusting to the connected device’s needs, it protects both the powered device and the injector from over-powering while ensuring reliable performance across mixed-device deployments.
• Plug-and-play simplicity accelerates deployment. Connect the injector to a standard AC outlet, attach a CAT5e/CAT6 cable from the injector’s PoE output to your PoE device, and you’re ready to power and network your equipment. LED indicators provide quick, at-a-glance status for power and PoE activity, making it easier to diagnose placement or cabling issues in busy environments where rapid setup matters.
• Safety and reliability are built into the design. Expect protection against common power faults, including overcurrent, overvoltage, and short circuits, so powered devices stay safe even in challenging electrical conditions. The rugged construction and adherence to essential safety standards help ensure dependable operation in offices, classrooms, and small data centers alike, reducing downtime and maintenance needs.
• Compact, space-saving design for flexible deployments. This injector is engineered to fit behind routers, switches, or other network gear with a small footprint and minimal intrusion. Its unobtrusive form factor supports neat, organized cabling in racks or workspaces, helping maintain a clean, professional installation while still delivering reliable PoE power where it’s needed most.

Technical Details of HPE PoE Injector

• Power Output: Up to 60 W per PoE port
• PoE Standards: Compatible with IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) devices
• Input Power: 100–240 VAC, 50/60 Hz
• Output Interface: 1 x RJ-45 PoE output port
• Protection and Safety: Overcurrent protection, overvoltage protection, short-circuit protection; built-in safeguards to protect both injector and powered devices

How to install HPE PoE Injector

• 1. Choose a stable, ventilated location near a power source and your PoE device. Avoid placing the injector in enclosed spaces where heat can accumulate.
• 2. Connect the included power cord to the injector’s AC input and plug it into a standard 100–240 VAC outlet. Ensure the outlet is well within reach for easy serviceability.
• 3. Run a CAT5e or higher Ethernet cable from the injector’s PoE output port to the PoE-enabled device you intend to power (for example, a wireless access point or IP camera).
• 4. Power on the injector and the connected device. Check the LED indicators on the unit and the powered device to confirm power negotiation and functionality. If the device does not power on, verify cable quality, connector integrity, and device compatibility.
• 5. Route cables neatly to maintain a tidy installation, keeping runs within typical PoE limits (avoid tight bends and excessive length where not required) and ensuring the injector remains within a safe operating environment that meets temperature and humidity guidelines for the equipment.

Frequently asked questions

• Q: What devices can be powered with the HPE PoE Injector?

  A: The injector powers PoE-enabled devices such as IP cameras, wireless access points, VoIP phones, and other compatible network devices that draw power over Ethernet.

• Q: Do I need a PoE switch if I use this injector?

  A: No dedicated PoE switch is required, as this injector provides power directly to a single PoE device. It can be used alone for standalone deployments or in combination with PoE switches to extend power to devices in locations without nearby switching infrastructure.

• Q: Is the 60 W output per port or total?

  A: The injector is rated to deliver up to 60 W of PoE power to a connected device. Always verify the powered device’s power requirements to ensure compatibility and performance.

• Q: What cables should I use?

  A: Use Category 5e (Cat5e) or higher Ethernet cables to ensure reliable PoE power delivery and data transmission. For best results, maintain good cable quality and avoid long, unbroken runs beyond standard PoE distance limits unless you plan appropriately for power and data needs.

• Q: What safety features are included?

  A: The injector includes protection against overcurrent, overvoltage, and short circuits, with safeguards designed to protect both the injector and the powered device. It is built to support safe operation in typical office and campus environments.