HPE SFP+ Module - 10GBase-SR Optical Transceiver

The HPE SFP+ Module is a high-performance, plug-and-play transceiver designed for optical network and data networking environments. Built to deliver dependable 10 Gigabit Ethernet connections, this module uses 850 nm laser technology over multi‑mode fiber to support 10GBase-SR over LC duplex interfaces. It’s an ideal choice for data centers, enterprise networks, campus backbones, and high‑throughput storage links where reliable, scalable connectivity is essential. With a compact SFP+ form factor and hot‑swappable design, the HPE SFP+ Module makes it easy to upgrade network capacity without major downtime. Whether you are refreshing legacy infrastructure, expanding inter‑switch links, or enabling faster server-to-storage access, this transceiver provides the performance, compatibility, and value you need to keep data flowing smoothly.

• High‑speed 10GBASE-SR performance - Supports 10 Gigabit Ethernet (10G) over multi‑mode fiber using 850 nm VCSEL technology, delivering robust, low‑latency uplinks and interconnects for data centers, server farms, virtualization environments, and storage networks. This enables rapid data replication, high‑volume backup, and responsive application delivery across your network.
• Flexible fiber and LC duplex design - Features a single LC duplex optical interface and is compatible with common multi‑mode fiber categories (OM3/OM4). Distances extend to approximately 300 meters on OM3 and up to 400 meters on OM4, providing scalable reach for clustered servers, top-of-rack switches, and core network links without changing fiber infrastructure.
• Easy installation and hot‑swappable operation - The HPE SFP+ Module is a standard, hot‑pluggable transceiver that slides into any SFP+ port on supported switches, routers, and servers. Its plug‑and‑play nature minimizes downtime during upgrades and maintenance, preserving uptime for critical workloads in busy data centers.
• Rugged, dependable build for data center environments - Engineered to endure the rigors of dense data center deployments, the module uses a durable housing, EMI shielding, and reliable performance within typical data center temperature ranges. It delivers consistent throughput and reliability for continuous uptime and predictable service levels.
• Broad compatibility and streamlined management - Designed to work across a wide variety of SFP+ equipped devices, the module simplifies inventory and network design by enabling consistent performance with diverse vendors and platforms, reducing the need for multiple, vendor-specific transceivers while maintaining high throughput and low error rates.

Tecnical Details of HPE SFP+ Module

• Interface: 1 x LC duplex SFP+ transceiver, hot‑swappable
• Data rate: 10 Gbps
• Fiber type: Multi‑mode fiber (OM3/OM4 recommended)
• Wavelength: 850 nm
• Connector: LC duplex
• Distance: Up to 300 m on OM3; Up to 400 m on OM4
• Form factor: SFP+ hot‑pluggable transceiver
• MSA compliance: SFP+ MSA compliant
• Operating temperature: 0 to 70°C typical for data center deployments

How to install HPE SFP+ Module

• Power down the device or place the port in a maintenance window if your equipment requires it, and verify that you have a compatible SFP+ slot ready for a transceiver swap.
• Hold the HPE SFP+ Module by the shell and align it with the SFP+ port, then insert firmly until you hear or feel a click that indicates the module is seated securely.
• Connect the LC duplex fiber pair to the transceiver and the corresponding fiber adapter on the other end, ensuring the connectors are clean and fully seated to avoid light leakage or poor signal integrity.
• Power on the device (if you powered down) and monitor the port link status using your network management tool, CLI, or LEDs on the switch/router to confirm a stable 10G link.
• Verify throughput and perform basic traffic tests to ensure the transceiver operates at the expected rate. If necessary, adjust interface settings (speed/duplex) on the device to match the connected peer and fiber characteristics.

Frequently asked questions

• Q: What is 10GBase-SR? A: 10GBase-SR is a short-range, high‑speed transceiver for multi‑mode fiber that operates at 850 nm and supports up to 10 Gbps over distances typically up to 300 meters on OM3 and up to 400 meters on OM4, depending on fiber type and installation conditions.
• Q: Which fiber types does this transceiver support? A: This SFP+ module is designed for multi‑mode fiber, with OM3 or OM4 standard classes providing the best balance of distance and bandwidth for data-center and campus networks.
• Q: Is the SFP+ module hot‑swappable? A: Yes. The module is designed to be hot‑swappable in compatible devices, allowing maintenance and upgrades with minimal downtime in many configurations.
• Q: Is cross‑vendor compatibility guaranteed? A: SFP+ SR modules generally work with a broad range of switches, routers, and servers that support SFP+ transceivers. However, it is best to confirm compatibility with your specific device model, firmware version, and vendor guidelines before deployment.
• Q: What should I expect in terms of warranty and support? A: Warranty terms and support offerings vary by seller and region. Check the product listing or contact the vendor for the exact warranty period and service options for the HPE SFP+ Module.