HPE SFP Module

The HPE SFP Module is a compact, high-efficiency transceiver designed to deliver reliable Fast Ethernet connectivity over fiber. Engineered for seamless integration with HPE networking gear, this 1 x LC 100Base-BX SFP provides a cost-effective solution for extending your network to conference rooms, edge locations, and remote workspaces without compromising performance. With its industry-leading build quality and proven HPE reliability, this SFP module helps you maximize bandwidth, minimize downtime, and future-proof your network for evolving fiber deployments.

• The HPE SFP Module utilizes 100Base-BX technology to deliver up to 100 Mbps data transfer over optical fiber. This BiDi (bi-directional) approach allows both transmit and receive signals to share a single fiber strand, maximizing fiber usage and simplifying cable plant in small to mid-size networks. Ideal for connecting conference rooms, distribution closets, and edge devices to the core network, it provides a straightforward upgrade path from copper to fiber where longer reach and electromagnetic immunity matter most.
• Designed with a compact LC duplex connector, this SFP transceiver drops into any SFP-enabled switch, router, or media converter. Its plug-and-play design means minimal configuration is required—simply insert the module, connect the LC fiber patch cord, and let the link come to life. The module’s reliable optical interface supports quick active links, helping to reduce installation time and avoid disruptions to critical business applications.
• Optimized for office and enterprise deployments, the HPE SFP Module is ideal for extending Fast Ethernet services to conference rooms, training spaces, or remote work hubs. The small form factor and low power consumption make it suitable for dense equipment racks and edge devices, while ensuring stable performance for video conferencing, whiteboard collaboration, and real-time presentation streaming across dispersed teams.
• Built to the high standards you expect from HPE, this SFP module offers robust compatibility with HPE switching architectures and compatible third-party devices that support SFP transceivers. Expect dependable link integrity, steady performance under load, and predictable behavior in mixed-vendor environments. The module is engineered with quality components to resist environmental stress and deliver consistent operation in day-to-day networking tasks.
• Energy-efficient design and thermal stability help minimize heat generation in crowded equipment rooms. This SFP module is engineered for long-term reliability, low bit-error rates, and steady operation in various temperatures and workloads. By reducing power draw and waste heat, it contributes to lower total cost of ownership while helping you maintain enterprise-grade performance across fiber links.

Technical Details of HPE SFP Module

• Product type: SFP transceiver
• Standard: 100Base-BX Fast Ethernet over optical fiber
• Connector: LC duplex
• Wavelengths: Transmit 1310 nm / Receive 1550 nm (BiDi BX configuration)
• Data rate: Up to 100 Mbps

how to install HPE SFP Module

To install the HPE SFP Module, follow these steps to ensure a clean, reliable fiber connection:

1) Verify that your network device (switch, router, or media converter) has an available SFP port and supports 100Base-BX operation. Confirm that the device firmware or OS supports SFP transceivers and the BX mode.

2) If your equipment supports hot-swapping, you can insert the SFP module with the system powered on; otherwise, power down the device before installation. Hold the module by its edges and align it with the SFP slot, then insert firmly until it seats with a click. Do not force the module, and avoid touching the optical interfaces.

3) Connect a high-quality LC fiber patch cord to the LC duplex connector on the SFP module. Ensure you are using the correct fiber type (single-mode is typically used for BX deployments) and observe proper polarity. Route cables neatly to avoid strain or bending that could degrade signal quality.

4) Connect the opposite end of the fiber to the target device or fiber distribution system. Verify that the link partner supports BX operation and is configured for a matching data rate.

5) Power on the device (if required) and check the link status indicators on both the SFP module and the host device. On most switches, the port will negotiate to 100 Mbps automatically if auto-negotiation is enabled. If necessary, configure the port speed to 100 Mbps Full Duplex to maximize performance and minimize collision domains.

Frequently asked questions

• What is the HPE SFP Module used for? It provides a fiber-based 100Base-BX uplink or extension for network connections, enabling reliable Fast Ethernet coverage over optical fiber to connect distant devices such as conference rooms and edge locations.
• Is this SFP module compatible with non-HPE devices? The module is designed for HPE networking gear and SFP ports. Compatibility with third-party devices can vary; always verify interoperability with your vendor and check the device’s SFP compatibility list before purchase.
• What kind of fiber do I need? Use appropriate single-mode fiber and an LC duplex patch cord for BX links. Confirm fiber type, distance, and connector polish requirements with your network design and vendor recommendations.
• Can I hot-swap this SFP? In many HPE devices, SFP modules are hot-swappable, allowing replacement or upgrades without powering down the system where the platform supports it. Refer to your device’s maintenance guide for exact procedures.
• What warranty or support comes with the module? Warranties vary by seller and region. Check the specific terms with your supplier for coverage, return policies, and RMA procedures related to this HPE SFP Module.