HPE StoreEasy 1GbE 2-Port 332T Adptr – PCIe Gigabit Ethernet Adapter

Meet the HPE StoreEasy 1GbE 2-Port 332T Adptr, a compact and reliable dual-port Gigabit Ethernet PCIe adapter designed to upgrade your StoreEasy storage environment and other PCIe-equipped servers. Built on the PCI Express 2.0 x1 bus, this plug-in card delivers fast 10/100/1000Base-T connections over copper twisted-pair cabling, offering flexible networking options for data transfers, backups, and remote management. With two independent RJ-45 ports, you can connect two networks or dedicate paths for separate traffic streams without compromising performance. The 332T adapter is engineered for straightforward installation in a standard PCIe slot, enabling seamless integration into existing systems with minimal downtime. Whether you’re expanding network reach in a rack-mount setup or adding a cost-effective, reliable network interface to a standalone server, this card provides a dependable, plug-and-play solution that scales with your needs.

• Two RJ-45 Gigabit Ethernet ports supporting 10/100/1000Base-T for flexible network connectivity.
• PCI Express 2.0 x1 interface delivering efficient, high-speed data transfer with broad compatibility.
• Plug-in card form factor that fits standard PCIe slots in servers and workstations for easy upgrades.
• Copper twisted-pair cabling via RJ-45 connectors ensures cost-effective, widely available network cabling.
• Designed to support fast network access for StoreEasy storage environments and other PCIe-enabled systems.

Technical Details of HPE StoreEasy 1GbE 2-Port 332T Adptr

• Interface: PCI Express 2.0 x1
• Ports: 2 x 10/100/1000Base-T Gigabit Ethernet (RJ-45)
• Function: Dual-port Ethernet adapter
• Form factor: Plug-in PCIe card
• Cabling: Twisted Pair copper cabling
• Data rate: Up to 1 Gbps per port; PCIe 2.0 x1 bus provides up to ~500 MB/s theoretical throughput on the bus
• Category: Network interface card for store and server connectivity

how to install HPE StoreEasy 1GbE 2-Port 332T Adptr

Installing this dual-port Ethernet adapter is designed to be straightforward and low-disruption. Follow these steps to upgrade your system’s networking capabilities quickly and safely:

• Power down your server or workstation and unplug the power cord to prevent electrical shock or data loss.
• Open the chassis to access the motherboard and locate an available PCI Express slot (preferably a PCIe x1 slot for this card).
• Remove any slot cover from the chassis I/O panel corresponding to the chosen PCIe slot.
• Gently align the HPE StoreEasy 1GbE 2-Port 332T Adptr with the PCIe slot and press until it is firmly seated in the slot.
• Secure the card with the appropriate mounting screw to ensure a stable connection and prevent movement during operation.
• Close the chassis, reconnect power, and boot the system. The operating system should recognize the new adapters; install any required drivers if prompted by the OS or management software.
• Connect your network cables to the two RJ-45 ports and configure the network settings according to your deployment needs (e.g., management network, data transfer network).

Frequently asked questions

• Q: What is the HPE StoreEasy 1GbE 2-Port 332T Adptr? A: It is a dual-port Gigabit Ethernet PCIe plug-in adapter that provides two independent 10/100/1000Base-T Ethernet connections for StoreEasy and compatible systems.
• Q: How many ports does it have? A: It has two Gigabit Ethernet ports.
• Q: What interface does it use? A: It uses a PCI Express 2.0 x1 interface for connection to the host motherboard.
• Q: What type of cabling does it require? A: It uses copper twisted-pair cabling with RJ-45 connectors (10/100/1000Base-T).
• Q: Is this a plug-in card or a standalone device? A: It is a plug-in PCIe card designed to be installed into a PCIe slot inside a compatible server or workstation.