Intellinet 16-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports

The Intellinet 16-Port Gigabit Ethernet PoE+ Switch with 2 SFP Ports is the ultimate networking solution for businesses and home users looking to enhance their network capabilities. This advanced switch not only provides power over Ethernet (PoE) but also ensures high-speed connectivity for various devices, including IP cameras, VoIP phones, and wireless access points. With features like VLAN support and PoE Extend Mode, this unmanaged switch is designed to deliver seamless performance while simplifying your network setup.

Key Features of the Intellinet 16-Port Gigabit Ethernet PoE+ Switch:

• Power over Ethernet (PoE) Support: This switch complies with the IEEE 802.3at standard, allowing it to deliver up to 30 watts of power per port. Say goodbye to messy power adapters and electrical rewiring!
• Self-Healing Network: Equipped with a Powered Device Monitor (PDM), this switch automatically restarts unresponsive PoE devices, reducing service calls and streamlining network management.
• Enhanced Network Performance: With 16 Gigabit Ethernet ports and two SFP slots, enjoy a total bandwidth of up to 36 Gbps, eliminating bottlenecks and providing fast connectivity for all your devices.
• PoE Extend Mode: Easily activate the PoE Extend Mode to extend your PoE range up to 250 meters (820 feet), perfect for installations requiring longer cable runs.
• Manual VLAN Configuration: Isolate ports 1 to 16 from each other while allowing them to communicate through the SFP uplink ports, enhancing your network's security and efficiency.

Technical Details of the Product:

• Power Output: Up to 30 watts per port
• PoE Power Budget: 250 watts
• Number of Ports: 16 RJ45 Gigabit Ethernet ports and 2 SFP module slots
• Switch Fabric: 36 Gbps
• Protocol Compliance: IEEE 802.3at and IEEE 802.3af

How to Install the Intellinet 16-Port Gigabit Ethernet PoE+ Switch:

1. Connect your network devices to the RJ45 ports using Cat5e or Cat6 cables.
2. If using fiber connectivity, insert the appropriate SFP modules into the SFP slots.
3. Plug the switch into a power outlet using the supplied power cable.
4. Power on the switch and ensure that the LED indicators are functioning correctly.
5. For PoE Extend Mode, use the slide switch on the front panel to activate this feature as needed.

Frequently Asked Questions:

1. What devices are compatible with the Intellinet 16-Port Gigabit Ethernet PoE+ Switch?

This switch is compatible with any IEEE 802.3at or IEEE 802.3af compliant devices, such as IP cameras, VoIP phones, and wireless access points.

2. Can I use non-PoE devices with this switch?

Yes, the Intellinet switch supports a mix of PoE and non-PoE devices. Non-PoE devices can be connected without any issues.

3. How does the self-healing feature work?

The Powered Device Monitor (PDM) feature continuously monitors connected PoE devices. If a device stops responding, the switch will automatically restart it to ensure uninterrupted service.

4. What is the maximum distance for PoE with this switch?

In standard mode, the maximum distance for PoE is up to 100 meters (328 feet). However, with the PoE Extend Mode activated, it can extend the range up to 250 meters (820 feet).

5. Is VLAN configuration difficult?

No, the VLAN configuration is manual and can be easily adjusted using the slide switch on the front panel to isolate ports as needed.