Intellinet Gigabit Ethernet Single-Mode Media Converter

The Intellinet Gigabit Ethernet Single-Mode Media Converter is designed for network designers and IT professionals who need a reliable, seamless bridge between copper Ethernet and fiber optics. This high-performance device simplifies network expansion and migration by allowing you to extend your copper-based infrastructure onto a fiber backbone without replacing existing equipment. With plug-and-play operation, robust metal housing, and support for standard gigabit Ethernet protocols, this media converter delivers stable, scalable performance for campuses, data centers, and remote sites. Whether you’re upgrading a single office or building a multi-building network, this converter provides a cost-effective, future-proof path to higher bandwidths and longer reach while preserving your current investments in copper switches, routers, and cabling.

• Unified Gigabit performance: bridges copper Ethernet to fiber at full 1 Gbps throughput, preserving your copper investments while enabling high‑speed, low‑latency communication across mixed media segments; supports full‑duplex operation and seamless traffic forwarding between the copper and fiber sides.
• Long-distance fiber reach: designed for single‑mode fiber, enabling links across multiple kilometers and connecting buildings or campuses without repeaters; delivers reliable data transmission with low signal loss and strong immunity to electromagnetic interference.
• Flexible copper port and auto-setup: features a 10/100/1000BASE‑T RJ‑45 copper port with auto‑negotiation and auto MDI/MDIX, allowing immediate, hassle-free connectivity with a wide range of Ethernet devices such as switches, routers, and servers.
• Fiber connector and reliability: uses a durable LC duplex fiber port for stable, precise connections; housed in a compact, rugged metal enclosure designed for desktop or rack‑mount installation with quiet, fanless operation.
• Easy deployment and management: plug‑and‑play with clear LED indicators for power, link, and activity; compact form factor and sturdy construction simplify installation in tight spaces and across multiple sites.

Technical Details of Intellinet Gigabit Ethernet Single-Mode Media Converter

• Standards: 1000BASE-T copper side and 1000BASE-LX fiber side (single‑mode)
• Fiber type and connector: single‑mode fiber, LC duplex connector
• Wavelength: 1310 nm typical for LX operation
• Interfaces: 1 x 10/100/1000BASE‑T RJ‑45 copper port; 1 x 1000BASE‑LX fiber port
• Power: external 5V DC power adapter
• Enclosure: compact metal housing suitable for desktop or rack‑mount installation; fanless design for silent operation

how to install Intellinet Gigabit Ethernet Single-Mode Media Converter

• Plan the placement: select a cool, well-ventilated location near the devices you’ll connect, with a clear path for the copper and fiber cables.
• Connect the copper side: plug a Cat5e/6 patch cord into the RJ‑45 port on the device you’re linking and connect the other end to your switch, router, or NIC; ensure the connected device is configured for gigabit operation if possible.
• Connect the fiber side: insert the LC duplex fiber patch cord into the fiber port, aligning TX to RX as required by your network topology; verify you’re using the correct single‑mode fiber type for your distance.
• Power up: connect the included 5V DC power adapter and verify the power LED is lit; check the link/activity LEDs on both copper and fiber sides after connections are complete.
• Test and validate: perform basic connectivity tests (ping, throughput, or file transfers) to confirm end‑to‑end communication; inspect status indicators to ensure stable links and monitor for any error conditions.

Frequently asked questions

What is the primary purpose of the Intellinet Gigabit Ethernet Single-Mode Media Converter?

The converter is designed to bridge copper Ethernet networks to a fiber backbone, enabling long‑distance connections and straightforward network migrations. It allows you to extend reach from a copper switch or device to a fiber segment without replacing existing equipment, supporting gradual upgrades and scalable network growth.

Which interfaces are supported on this device?

It includes one 10/100/1000BASE‑T RJ‑45 copper port and one 1000BASE‑LX single‑mode fiber port with an LC duplex connector, enabling a straightforward copper-to-fiber transition at gigabit speeds.

Does the copper port support auto‑negotiation and auto MDI/MDIX?

Yes. The copper port automatically negotiates the best speed and duplex and detects MDI/MDIX, simplifying setup and ensuring compatibility with a wide range of Ethernet devices.

What kind of distance can I achieve with single‑mode fiber?

Distances depend on the fiber specification, optical budget, and installation environment. Single‑mode LX links typically span multiple kilometers, making this converter suitable for inter‑building connections and campus deployments while maintaining high data integrity.

How do I install and maintain this device?

The device is designed for plug‑and‑play operation with a 5V DC power adapter. For installation, place the unit in a suitable location, connect copper and fiber cables correctly, power on, and verify link indicators. Regularly check LEDs to monitor link status, and perform routine throughput tests to ensure consistent performance.