Intellinet Gigabit Ethernet WDM Bi-Directional Single Mode Media Converter

The Intellinet Gigabit Ethernet WDM Bi-Directional Single Mode Media Converter is the strategic bridge between copper-based networks and modern fiber infrastructure. This compact, enterprise-grade device enables scalable, cost-efficient network upgrades by using bidirectional wavelength-division multiplexing (WDM) to carry full-duplex gigabit traffic over a single-mode fiber link. By marrying 10/100/1000Base-Tx copper connectivity with a 1000Base-Lx SC fiber interface, it supports seamless migrations to fiber backbones without the need for extensive rewiring or replacement of critical switches and routers. Designed for SMBs and large offices alike, this converter delivers reliable performance, simple deployment, and a path to future-proof network growth.

• Bi-Directional WDM Technology: This unit leverages Rx1550/Tx1310 wavelengths to enable simultaneous transmit and receive over a single-mode fiber, dramatically increasing fiber capacity while reducing fiber counts and costs. The result is a flexible link that scales with your network needs—ideal for connecting a copper Ethernet edge to a long-haul fiber backbone or campus link.
• Copper to Fiber Interface for Seamless Upgrades: With a 10/100/1000Base-Tx copper Ethernet port and a 1000Base-Lx fiber port (SC connector), the converter lets you connect legacy Ethernet devices to a modern fiber network. This enables higher throughput, lower latency, and the ability to extend distance without replacing existing switches or core equipment.
• Long-Distance Fiber Reach: Engineered for up to 20 kilometers on single-mode fiber, this media converter enables campus or remote office connectivity, centralized services, and resilient data paths without compromising signal integrity. The long-haul capability supports distributed data centers and disaster recovery strategies with minimal equipment and maintenance.
• Plug-and-Play Deployment with Included Power Adapter: Designed for quick setup, the device ships with a 2-pin Euro power adapter for fast power connection. Its compact profile fits IT closets, shelf spaces, or small cabinets, enabling straightforward, non-disruptive installation and easy management alongside existing network devices.
• Cost-Efficient Networking Solution: By consolidating copper-to-fiber connections into a single, bi-directional link, this media converter helps reduce fiber leasing, splicing, and management overhead. It delivers high-throughput gigabit performance while protecting your existing investments and simplifying network architecture for future upgrades.

Technical Details of Intellinet Gigabit Ethernet WDM Bi-Directional Single Mode Media Converter

• Interfaces: 10/100/1000Base-Tx copper Ethernet port (RJ-45) and 1000Base-Lx fiber interface with SC connector
• WDM Bi-Directional Operation: Simultaneous upstream and downstream transmission on a single-mode fiber using Rx1550/Tx1310 wavelengths
• Distance: Up to 20 kilometers on single-mode fiber
• Fiber Type: Single-mode fiber with SC connector
• Power Adapter: Includes a 2-pin Euro power adapter for convenient regional power compatibility
• Form Factor: Compact media converter suitable for rack-mount or shelf placement in standard IT environments

How to Install Intellinet Gigabit Ethernet WDM Bi-Directional Single Mode Media Converter

• Power the converter using the included 2-pin Euro power adapter and place it in a suitable network rack or shelf near your network edge.
• Connect the copper network device (switch, router, or server) to the 10/100/1000Base-Tx port using a standard Ethernet cable.
• Connect the single-mode fiber link to the 1000Base-Lx SC port with the appropriate SC fiber patch cable, ensuring a clean, secure connection.
• Power on the device and verify basic connectivity through your network management tools or by testing data transfer between connected devices.
• Document the fiber path and device placement for easy maintenance and future upgrades, and monitor performance through your existing monitoring systems to ensure consistent gigabit throughput.

Frequently asked questions

• What does this converter connect?
• Answer: It connects a copper 10/100/1000Base-Tx Ethernet segment to a single-mode fiber link (1000Base-Lx) using an SC connector, enabling bidirectional WDM on a single fiber strand.
• What is the maximum fiber distance supported?
• Answer: Up to 20 kilometers on single-mode fiber, allowing long-range campus or data-center interconnects without signal loss.
• What wavelengths are used for WDM?
• Answer: Bi-directional WDM uses Rx1550 and Tx1310 wavelengths to carry data in opposite directions over the same fiber.
• What power options are included?
• Answer: The unit ships with a 2-pin Euro power adapter for easy regional power compatibility.
• Is this suitable for upgrading existing networks?
• Answer: Yes. It provides a cost-effective path to fiber deployment by pairing copper Ethernet with long-haul fiber, helping preserve existing investments in switches and routers while expanding network reach.