Kingston 16GB (1 x 16GB) DDR5-6000 MT/s CL30 FURY Beast White RGB EXPO

Meet Kingston FURY Beast White RGB EXPO, a high-performance DDR5 memory module built to elevate gaming, streaming, and content creation. This 16GB single-stick module runs at a blistering 6000 MT/s with CL30 latency, delivering rapid responsiveness and smooth multitasking for today’s demanding workloads. Engineered for easy tuning, it supports both AMD EXPO v1.1 and Intel XMP 3.0 profiles, making it simple to enable optimized performance with a single click. The white RGB heat spreader not only looks striking in white-built systems but also helps dissipate heat to maintain stability during intense gaming sessions or heavy workloads. With Kingston’s renowned reliability and a lifetime warranty, this memory module is designed to stand up to long hours of use while keeping your system performing at its best.

• Blazing DDR5-6000 CL30 performance: Delivers rapid data access and improved frame rates in modern titles, plus snappier system responsiveness for multitasking, content creation, and heavy workloads.
• White RGB heat spreader aesthetic: A premium white finish with customizable RGB lighting that adds a high-end look to builds featuring white or light-colored themes, while the heat spreader helps keep temperatures in check during overclocking or extended gaming sessions.
• AMD EXPO v1.1 and Intel XMP 3.0 ready: Easily apply optimized memory profiles for supported platforms with one-click overclocking, simplifying performance tuning for Ryzen and Intel systems alike.
• 16GB single module (1 x 16GB) in a 1Rx8 configuration: A compact, single-stick design that provides ample capacity for gaming, creative apps, and heavy multitasking without crowding the memory slots on compact builds.
• Reliability and warranty you can count on: Kingston FURY memory is backed by a lifetime warranty and rigorous testing, ensuring consistent performance and long-term stability.

Technical Details of Kingston 16GB DDR5-6000 MT/s CL30 FURY Beast White RGB EXPO

• Capacity: 16GB (1 x 16GB)
• Module configuration: 1Rx8
• Type: DDR5 SDRAM
• Speed: DDR5-6000 MT/s
• CAS Latency (CL): CL30
• Voltage: 1.35V (XMP/EXPO profile supported)
• Heat spreader finish: White with built-in RGB lighting
• RGB compatibility: Kingston FURY RGB with software compatibility across leading motherboard RGB ecosystems
• Profiles supported: AMD EXPO v1.1 and Intel XMP 3.0
• Warranty: Lifetime warranty

How to Install Kingston 16GB DDR5-6000 CL30 FURY Beast White RGB EXPO

Installing Kingston FURY DDR5 memory is straightforward and quick, with plug-and-play compatibility for DDR5-enabled motherboards. Follow these steps to get your 16GB module up and running:

1. Power down your PC and unplug the power cable. Ground yourself to avoid static discharge, or use an anti-static wrist strap.
2. Open the computer case and locate the memory (DIMM) slots on the motherboard. If you are replacing existing modules, remove them first by releasing the securing clips on either side.
3. Handle the Kingston FURY module by the edges; avoid touching the gold contacts. Align the notch on the module with the slot key to ensure proper orientation.
4. Insert the module evenly into the primary DIMM slot, applying steady downward pressure until the latches click into place. A gentle click on both sides indicates a secure fit.
5. If you are installing more than one module, ensure they are seated in the correct slots according to your motherboard’s manual for optimal dual-channel or single-channel configuration.
6. Power on the system. Enter the BIOS/UEFI setup during boot (commonly by pressing Del, F2, or another key shown at startup). Enable the memory profile: select XMP (Intel boards) or EXPO (AMD boards) to apply the rated DDR5-6000 CL30 settings. Save and exit the BIOS, then let the system reboot.
7. Once the OS loads, you can verify the memory speed and timings in your system information tool or BIOS to confirm the 6000 MT/s operation. If needed, re-enter the BIOS to tweak timings or voltage, respecting the motherboard’s guidelines for stability.

Tips for best results:

• Keep your system within a balanced temperature range; ensure adequate case airflow to maintain stable DDR5 operation at higher speeds.
• When pairing with other memory modules, verify compatibility and recommended configurations in your motherboard manual to maximize stability and performance.
• If you want to customize RGB lighting, use Kingston FURY CTRL software or your motherboard’s RGB utility to synchronize effects with other components in your build.

Frequently asked questions

• Q: Is this a single 16GB module? A: Yes. The Kingston 16GB DDR5-6000 kit is a single 16GB DIMM (1 x 16GB).
• Q: What platforms are supported? A: The memory supports AMD EXPO v1.1 and Intel XMP 3.0 profiles, making it compatible with modern Ryzen and Intel-based systems that support DDR5 RAM.
• Q: Do I need to enable XMP/EXPO? A: Enabling XMP (Intel) or EXPO (AMD) in the BIOS is recommended to reach the rated 6000 MT/s speed. Without enabling these profiles, the RAM may run at a default lower speed.
• Q: Will this memory fit in my white-themed build? A: The module features a white heat spreader with RGB lighting designed to complement white and light-colored PC builds for a cohesive aesthetic.
• Q: Is there warranty coverage? A: Yes. Kingston FURY memory modules come with a lifetime warranty, reflecting Kingston’s commitment to reliability and support.
• Q: Can I use this RAM with RGB software? A: Yes. The RGB lighting is compatible with major RGB ecosystems and can be controlled via Kingston FURY CTRL or supported motherboard utilities for synchronized lighting effects.
• Q: What performance benefits should I expect? A: You’ll experience faster data access, reduced latency in demanding applications, smoother multitasking, and improved frame rates in many modern games when paired with a suitable motherboard and a DDR5-enabled system.