Kingston 64GB (2x32GB) DDR5-6000 MT/s CL30 FURY Beast White EXPO

Power your most demanding workflows with Kingston FURY Beast memory. This 64GB kit (2x32GB) of DDR5-6000 CL30 modules is built for speed, stability, and striking aesthetics. The white FURY Beast heat spreader not only looks sleek in a premium build, it also helps keep temperatures in check during intense gaming, streaming, or content-creation sessions. Designed to unlock performance on modern motherboards, this kit supports AMD EXPO v1.1 and Intel XMP 3.0, making it easier than ever to enable high-speed profiles with compatible platforms. Whether you’re a competitive gamer, a 3D/video editor, or a multitasking power user, this Kingston FURY kit is engineered to deliver exceptional bandwidth, low latency, and reliable excellence across workloads.

• High-capacity, high-bandwidth memory: 64GB total (2x32GB) of DDR5 memory delivers abundant headroom for photo/video editing, 4K/8K workflows, virtual machines, and heavy multitasking while maintaining fast, responsive system performance.
• DDR5-6000 MT/s with CL30 latency: Experience dramatically improved memory bandwidth and lower latency compared to older generations, helping games load faster, assets stream smoothly, and applications respond with greater immediacy.
• 2Rx8 configuration for dense workloads: The 2R x8 configuration provides robust memory interleaving and bandwidth to support modern multi-threaded applications, large datasets, and memory-hungry software suites on compatible platforms.
• EXPO v1.1 & Intel XMP 3.0 ready: Designed to integrate with AMD EXPO v1.1 and Intel XMP 3.0 profiles, allowing you to apply optimized timings and speeds with a simple BIOS profile on supported motherboards.
• Stylish white FURY Beast heat spreader: The white aluminum/steel heat spreader combines visual appeal with practical thermal performance, helping maintain stability during extended gaming sessions and intensive workloads.

Technical Details of Kingston 64GB (2x32GB) DDR5-6000 CL30 FURY Beast White EXPO

• Memory Type: DDR5 SDRAM
• Module Configuration: 2x32GB (64GB kit), 2Rx8
• Speed: 6000 MT/s
• Latency: CL30
• Kit Capacity: 64GB (2x32GB)
• Heat Spreader: White FURY Beast design for enhanced cooling and aesthetics
• Profile Support: AMD EXPO v1.1 and Intel XMP 3.0 compatible

How to install Kingston 64GB DDR5-6000 CL30 FURY Beast White EXPO

Installing Kingston FURY DDR5 memory is straightforward on a compatible motherboard. Follow these steps to ensure optimal performance and stability:

1) Power down the PC, unplug it, and ground yourself to prevent static discharge. Open the case to access the motherboard and memory slots.

2) Verify motherboard compatibility with DDR5 and confirm support for high-speed profiles (EXPO/XMP) in the BIOS. Check the motherboard’s manual for recommended slots to use for dual-channel operation with a 2‑DIMM kit.

3) Align the memory module notch with the slot key and insert the modules firmly into the appropriate DIMM slots. Apply even pressure on both ends until the latches click, ensuring the modules are seated properly.

4) Reinstall the case panels, reconnect power, and power on the system. Enter the BIOS/UEFI. If your motherboard supports EXPO (for AMD) or XMP (for Intel), enable the corresponding profile to apply the rated speed (6000 MT/s) and timings (CL30). If prompted, you may also adjust memory voltage or SOC settings to improve stability, but this is usually not required on well-matched kits.

5) Save changes and reboot. Once the system posts, run a memory diagnostic (such as Windows Memory Diagnostic or MemTest86) to verify stability across the installed modules. For best results, stress-test under typical workloads to ensure long-term reliability.

6) If instability occurs, rollback to a lower speed or timings and re-run tests. In some cases, updating the motherboard BIOS to the latest version can improve compatibility with DDR5 kits and enable smoother EXPO/XMP operation.

With the Kingston 64GB DDR5-6000 CL30 FURY Beast White EXPO kit installed, you’ll notice more responsive multitasking, faster data access for large files, and smoother performance when running memory-heavy applications. The combination of high capacity, fast speed, and advanced EXPO/XMP profiles makes this kit particularly appealing for users building a high-end gaming rig, a content-creation workstation, or a streaming/production setup that demands consistent, peak memory performance.

Frequently asked questions

• What is the total capacity of this memory kit? The kit comprises 64GB total memory in a 2x32GB configuration (2x32GB modules).
• What speed and latency does it offer? It operates at 6000 MT/s with a CL30 latency rating for optimized bandwidth and responsiveness.
• Is this kit compatible with AMD and Intel platforms? Yes. The modules are designed to support AMD EXPO v1.1 and Intel XMP 3.0 profiles, providing a straightforward path to running at rated speeds on compatible motherboards.
• Do I need to manually tune every setting? In many cases, enabling the appropriate EXPO/XMP profile in your BIOS automatically sets the memory to its rated speed and timings. Some systems may require minor voltage adjustments for stability, but many users will simply enable the profile and boot.
• Who is Kingston FURY for? This kit is ideal for gamers seeking high frame rates and quick asset loading, video editors and 3D artists handling large projects, and power users who run multiple applications and virtual machines simultaneously.
• Will I notice a difference in real-world performance? Yes. DDR5-6000 CL30 memory with a 64GB capacity improves multitasking responsiveness, reduces texture and asset streaming bottlenecks in modern games, and speeds up memory-heavy workloads like rendering, virtualization, and large datasets.