Kingston 64GB DDR5 SDRAM Memory Module

Experience next-gen speed and reliability with the Kingston 64GB DDR5 SDRAM memory module. Built for servers, workstations, and high-performance desktops, this single-module memory sticks delivers a blazing DDR5-4800 speed, ECC for error correction, and registered buffering to support demanding workloads. With 64 GB of capacity per DIMM, it enables vast memory pools required for virtualization, large-scale databases, real-time analytics, and memory-intensive applications. The 288-pin DIMM form factor houses a dual-rank design that balances performance and reliability while maintaining compatibility with a wide range of server motherboards that support DDR5 ECC RDIMM modules. Operating at a modest 1.10 V, this Kingston module blends energy efficiency with thermal stability, helping to reduce overall system power consumption while maintaining peak performance under heavy load. If you are upgrading servers, workstations, or mission-critical environments, this Kingston 64GB DDR5 module offers the stability, capacity, and bandwidth needed to keep workloads smooth and responsive.

• Unmatched capacity for heavy workloads: With 64 GB of DDR5 memory per module, you gain substantial headroom for virtualization, databases, in-memory analytics, large-scale simulations, and multi-user environments. The generous capacity reduces paging and enhances your system’s ability to run multiple memory-hungry applications concurrently, delivering consistent performance even under peak demand.
• DDR5-4800 speed for faster data throughput: This module operates at DDR5-4800 (PC5-38400) speeds, delivering higher bandwidth and improved data throughput compared to previous generations. Expect snappier boot times, swifter application launches, and accelerated data processing across simulations, design workflows, and streaming workloads.
• ECC and Registered reliability: Engineered for servers and workstations, the ECC (Error-Correcting Code) and registered (buffered) design protect against data corruption and stabilize memory signals across large memory configurations. This results in enhanced system reliability, fewer silent failures, and improved uptime—essential for data centers and enterprise environments.
• Dual-rank, 288-pin DIMM format: The dual-rank organization optimizes interleaving for better performance and efficiency, while the standard 288-pin DIMM format ensures broad compatibility with DDR5-enabled server motherboards that support RDIMM modules. This balance of rank, capacity, and form factor is ideal for maximizing memory bandwidth in multi-channel configurations.
• Low voltage and efficiency: Operating at 1.10 V, this Kingston memory module helps reduce overall system power draw and thermal output. Lower voltage translates into cooler operation and potential energy savings in dense server environments, which is especially valuable in data centers and high-performance computing clusters.

Technical Details of Kingston 64GB DDR5 SDRAM Memory Module

• Capacity: 64 GB per module
• Memory Type: DDR5 SDRAM
• Speed: DDR5-4800 (PC5-38400)
• CAS Latency: CL40
• Form Factor: 288-pin DIMM
• Rank: Dual-rank
• Voltage: 1.10 V
• ECC: Yes
• Registered: Yes
• Module Type: RDIMM (Registered DIMM) for servers/workstations
• Compatibility: Designed for DDR5-enabled servers and professional workstations that support ECC RDIMM memory

How to install Kingston 64GB DDR5 SDRAM Memory Module

• Prepare your workspace: Power down the server or workstation, unplug all cables, and discharge any static electricity. Wear an anti-static wrist strap if available to protect sensitive components.
• Open the chassis: Remove side panels or access panels as required to expose the motherboard and memory slots. Refer to your system manual for specific instructions on access and safety.
• Identify the correct slots: Locate the DDR5 RAM slots on your motherboard that are designated for RDIMM modules. If upgrading, consult the motherboard’s memory population guidelines to determine the proper slot order and channels for optimal performance.
• Align and insert: Hold the Kingston 64GB DDR5 memory module by the edges, align the notch with the key in the slot, and press firmly and evenly until the module seats completely. You should hear a click as the latches snap into place.
• Repeat if necessary and verify: If installing multiple modules, repeat the process for each module, ensuring modules are seated in the correct slots according to your multi-channel configuration. Close the chassis, reattach power, and boot the system.
• BIOS/UEFI check: Enter the BIOS/UEFI during startup and verify that the memory is detected at the correct capacity and speed. If needed, enable any specific memory profiles or SPD settings recommended by the motherboard manufacturer.
• Post-install testing: After the system boots, run memory diagnostics or stress tests to confirm stability under load. Monitor temperatures and system performance to ensure reliability in sustained workloads.

Frequently asked questions

• Q: What is DDR5 ECC RDIMM memory? A: DDR5 ECC RDIMM memory combines error-correcting code (ECC) for data integrity with Registered buffering to improve signal stability in systems with large memory configurations. It is intended for servers and workstations requiring high reliability and uptime.
• Q: Is this Kingston memory compatible with consumer desktops? A: This module is designed for DDR5 ECC RDIMM-enabled servers and workstations. Many consumer desktop systems do not support RDIMM or ECC memory, so compatibility depends on your motherboard’s specifications. Always check the motherboard’s memory compatibility list before purchasing.
• Q: What does CL40 mean? A: CL40 is the CAS latency, measured in clock cycles. A lower CL generally reduces memory access time, contributing to faster data retrieval. In DDR5-4800 memory, CL40 is typical for stability and reliability at the rated speed in server-grade configurations.
• Q: Does Kingston offer a warranty on this memory? A: Kingston memory modules typically come with a limited lifetime warranty and dependable technical support. Warranty terms can vary by region and product line, so verify the exact coverage with Kingston’s regional documentation or your supplier.
• Q: How can I ensure memory stability after installation? A: Use the motherboard’s memory diagnostics and stress tests to verify stability. Enable XMP/Extreme Memory Profiles if supported, ensure proper cooling and airflow, and confirm proper seating of each module. Running sustained workloads and monitoring for errors helps ensure long-term reliability.
• Q: What workloads benefit most from 64 GB per module? A: Virtualization, large-scale databases, in-memory analytics, enterprise workloads, and multi-user environments benefit greatly from 64 GB per module by reducing paging, enabling larger datasets in memory, and improving overall throughput under load.