Description
Upgrade your desktop with the Kingston FURY Beast 16GB DDR3 Memory Kit (2x8GB). Built for performance-minded gamers and power users, this memory kit delivers fast, reliable DDR3 performance on systems based on Intel’s 100 Series chipset. With the ability to auto-overclock up to 1866MHz on compatible boards, you’ll notice snappier game launches, smoother multitasking, and quicker application loads without the hassle of manual tuning. The bold, asymmetric aluminum heat spreader not only cools under load but also adds a distinctive, high-end look to your motherboard and case—so your rig looks as fast as it runs.
- Blazing performance with automatic overclocking to 1866MHz on supported Intel 100 Series systems—no manual tuning required, delivering immediate improvements in frame rates and responsiveness.
- Generous 16GB total capacity (2x8GB) to handle modern gaming, streaming, and multitasking workloads with plenty of headroom for productivity and content creation.
- Dual-channel architecture maximizes bandwidth and data throughput, resulting in smoother texture streaming, faster task switching, and improved overall system snappiness.
- Rugged aluminum heat spreader with an aggressive, modern design that not only helps dissipate heat under heavy workloads but also enhances the visual appeal of any build.
- Plug-and-play memory with broad compatibility across a wide range of motherboards; non-ECC, unbuffered design designed for straightforward upgrades and Kingston’s lifetime warranty for long-term reliability.
Technical Details of Kingston Fury Beast DDR3 Memory Kit
- Memory Type: DDR3 SDRAM
- Capacity: 16GB total (2x8GB)
- Speed: 1600MHz rated (base); automatic overclock to up to 1866MHz on compatible Intel 100 Series systems
- Memory Architecture: Dual-channel
- Module Configuration: 2x8GB DIMMs
- Form Factor: Desktop DIMM
- ECC/Buffered: Non-ECC, Unbuffered
- Heat Spreader: Asymmetric aluminum heat spreader for enhanced cooling and aesthetics
- Warranty: Lifetime warranty
How to install Kingston Fury Beast DDR3 Memory Kit
- Power down your PC and unplug the power cable; ground yourself to discharge any static electricity before handling components.
- Open the computer case to access the memory slots on the motherboard.
- Identify the correct DIMM slots for dual-channel operation (often the slots farther from the CPU; refer to your motherboard manual for the exact configuration).
- Align the notch on each memory module with the key in the slot, then evenly press the module straight down until the retainer clips click into place.
- Install both 8GB modules in the appropriate slots to enable dual-channel operation, ensuring a secure, level seating for each module.
- Close the case, reconnect power, and boot the system. The motherboard BIOS/UEFI should recognize the new memory automatically. If you’re aiming for the higher 1866MHz speed, enable XMP (if available) in the BIOS to apply the profile; on many Intel 100 Series systems, the memory will run at the rated speed with XMP enabled.
- Once the system boots, verify the new total memory and speed in your operating system’s system information or the BIOS/UEFI memory settings to confirm the upgrade is functioning as intended.
Frequently asked questions
-
Q: What is the total capacity of this Kingston FURY Beast kit?
A: The kit delivers 16GB of memory, comprised of two 8GB modules (2x8GB). -
Q: What speeds does it run at out of the box, and can it reach higher speeds?
A: The kit is designed for 1600MHz operation and can automatically clock up to 1866MHz on compatible Intel 100 Series motherboards without manual tuning; enabling XMP may be required to reach the higher speed. -
Q: Is this memory ECC or buffered?
A: No. It is non-ECC and unbuffered, which makes it suitable for mainstream consumer desktops and easier compatibility with most consumer motherboards. -
Q: Is it compatible with non-Intel systems or AMD platforms?
A: This kit is optimized for Intel 100 Series-based systems, with broad compatibility across a wide range of motherboards. For non-Intel or non-100 Series systems, check your motherboard’s memory compatibility and supported speeds before upgrading. -
Q: Do I need to adjust BIOS settings to use this memory?
A: In most cases, no manual tuning is required. The kit supports plug-and-play with XMP-ready profiles; simply enable XMP in the BIOS to reach the higher speed, if your motherboard supports it. -
Q: What kind of warranty comes with this memory?
A: Kingston FURY products include a lifetime warranty, providing long-term assurance for your memory investment. -
Q: Will this kit improve gaming performance?
A: Yes. The 16GB dual-channel configuration, combined with high-speed DDR3 memory and automatic overclocking, improves frame rates, reduces texture streaming pauses, and speeds up load times, especially in modern titles and multitasking scenarios.
Customer reviews
Showing - Of Reviews
