Kingston FURY Beast 32GB DDR5 RAM Kit — 2 x 16GB, 5600MHz

Power your gaming rig and creative workstation with Kingston FURY Beast DDR5 memory. This 32GB kit (2 x 16GB) delivers blazing DDR5-5600 speed, excellent bandwidth, and efficient performance for multitasking, content creation, and fast-loading games. Designed for modern motherboards that support DDR5, the kit provides reliable, plug-and-play performance with a low CL40 latency and a stable 1.25V operating voltage. Engineered for enthusiasts who demand speed, responsiveness, and headroom for future upgrades, the Kingston FURY Beast DDR5 kit is built to deliver a smoother, more immersive computing experience with lifetime-backed reliability.

• Extreme speed and multitasking power: A 32GB (2 x 16GB) DDR5 memory kit rated at DDR5-5600 MHz (PC5-44800) delivers higher bandwidth and faster responsiveness for gaming, video editing, and heavy multitasking, enabling smoother frame rates and quicker load times in demanding applications.
• Low latency and efficient operation: With a CL40 latency and a modest 1.25V operating voltage, this memory kit balances speed and efficiency to minimize delays while keeping power use in check—ideal for long gaming sessions and professional workloads alike.
• Ready for modern platforms: Designed for motherboards that support DDR5 and dual-channel configurations, this 2x16GB kit works across a wide range of Intel and AMD systems. It’s optimized for plug‑and‑play compatibility with XMP 3.0 profiles for effortless overclocking to the rated speed where supported.
• Durability and warranty you can trust: Kingston FURY products are backed by a limited Lifetime Warranty, with extensive testing to ensure reliable performance across a broad range of system configurations and thermal environments.
• Ideal for builders and upgraders: The 32GB total capacity provides substantial headroom for modern games, content creation, virtualization, and heavy multitasking, while maintaining excellent dual‑channel performance to maximize your system’s potential.

Technical Details of Kingston FURY Beast 32GB DDR5 Memory Kit

• Memory Type: DDR5 SDRAM
• Kit Capacity: 32GB (2 x 16GB)
• Speed: DDR5-5600 (PC5-44800)
• Latency: CL40
• Voltage: 1.25V
• Pins: 288-pin DIMM
• ECC: Non-ECC
• Registered/Unbuffered: Unbuffered
• Rank: Single-rank
• Form Factor: DIMM
• Warranty: Limited Lifetime Warranty
• Compatibility: Intel and AMD platforms that support DDR5; XMP 3.0 ready where applicable

How to install Kingston FURY Beast 32GB DDR5 Memory Kit

• Power down your PC, unplug the power cord, and discharge any residual energy by touching a grounded metal surface.
• Open the computer case and locate the memory slots on the motherboard. DDR5 modules use 288-pin DIMM slots and must be aligned with the notches in the module edge connector.
• Consult your motherboard manual to identify the recommended DIMM slots for dual-channel operation (commonly the second pair of slots, such as A2 and B2). If you’re upgrading from a smaller kit, remove existing modules only if necessary and keep track of any prior configurations.
• Gently insert the first 16GB module into the correct slot at the proper angle. Apply even pressure on both ends until the latches click and seal the module into place. Repeat for the second module in the paired slot.
• Reconnect power and boot the system. Enter the BIOS/UEFI to confirm that both modules are detected and running in dual-channel mode. If you want to run at the rated DDR5-5600 speed, enable an XMP profile (XMP 3.0) in the memory or overclocking section of the BIOS, then save and exit.
• Boot into your operating system and run a memory diagnostic to verify stability. If you encounter instability at the rated speed, revert to the default profile or adjust the memory voltage if your board supports it, always following the manufacturer’s guidelines.
• For best results, keep your system cool and ensure adequate airflow around the memory modules. Regularly update your motherboard BIOS to maximize DDR5 compatibility and stability.

Frequently asked questions

• Q: What speed is Kingston FURY Beast DDR5 memory kit rated for?
  A: The kit is DDR5-5600 (5600 MT/s) with an effective bandwidth suitable for modern gaming and productivity tasks. It supports automatic performance profiles via XMP 3.0 where your motherboard supports it.
• Q: Is this memory compatible with both Intel and AMD systems?
  A: Yes. It’s designed for modern platforms that support DDR5 memory and dual-channel operation, including current Intel and AMD desktop systems. Always check your motherboard QVL and BIOS support for DDR5.
• Q: How much memory do I get in this kit?
  A: The kit includes 32GB total, composed of 2 x 16GB DDR5 modules, ideal for multitasking, gaming, and content creation with ample headroom for demanding workloads.
• Q: Do I need to update my BIOS to use DDR5 memory?
  A: Most modern motherboards with DDR5 support will recognize DDR5 memory without a BIOS update. If you encounter detection or stability issues, a BIOS update may help improve compatibility and enable higher performance profiles.
• Q: What warranty comes with Kingston FURY memory?
  A: Kingston FURY memory kits come with a Limited Lifetime Warranty, reflecting Kingston’s commitment to reliability and ongoing product support.
• Q: Can I overclock this memory beyond the rated speed?
  A: While some systems allow manual overclocking beyond the rated speed, the kit is tested and validated to operate at DDR5-5600 with XMP 3.0 on supported platforms. Overclocking results can vary based on motherboard, CPU, and cooling, and may affect warranty temperatures.