Kingston FURY Beast 32GB (2 x 16GB) DDR5 SDRAM Memory Kit

KingstonSKU: 7306169

Price:
Sale price$143.80

Description

Kingston FURY Beast 32GB DDR5 Memory Kit — 2x16GB, DDR5-5200

Upgrade your gaming rig or creator workstation with the Kingston FURY Beast 32GB DDR5 memory kit. This high-performance dual-channel kit pairs two 16GB modules to deliver a total of 32GB of fast, efficient RAM designed for modern DDR5 platforms. With DDR5-5200 speed, low 1.25V operation, and tight CL36 latency, this kit helps you push brighter frame rates, faster load times, and smoother multitasking when running demanding titles, streaming software, and resource-intensive applications. Built for reliability and tested for compatibility, Kingston FURY Beast memory is a popular choice for gamers and professionals seeking dependable performance from their motherboard’s memory subsystem.

  • Blazing DDR5 speed and ample capacity: 32GB total capacity (2 x 16GB) in DDR5-5200 speed delivers higher bandwidth and improved multitasking efficiency for today’s multi‑threaded games and workloads.
  • Efficient, stable operation: Designed to run at 1.25V with optimized timings (CL36), delivering sustained performance with lower heat and power consumption compared to older generations.
  • Premium build for compatibility and durability: Non-ECC, unbuffered, 288-pin DIMMs in a compact, stylish heat-spreader design that fits a wide range of modern motherboards and chassis setups.
  • Dual‑rank, single‑kit protection: Single‑rank memory within a 2×16GB kit, engineered for dependable performance and flawless dual‑channel operation on supported platforms.
  • Lifetime warranty and tested reliability: Kingston backs the FURY Beast with a lifetime warranty, signifying confidence in its longevity and compatibility across popular motherboards.

Technical Details of Kingston FURY Beast 32GB DDR5 Memory Kit

  • Product Type: DDR5 SDRAM Memory Kit
  • Capacity: 32GB total (2 x 16GB)
  • Speed: DDR5-5200 (PC5-41600)
  • CAS Latency (CL): CL36
  • Voltage: 1.25V
  • Memory Rank: Single-rank
  • ECC: Non-ECC
  • Buffered: Unbuffered
  • Pin Count: 288-pin DIMM
  • Form Factor: DIMM
  • Heat Spreader: Included (Beast design for improved cooling and aesthetics)
  • Warranty: Lifetime
  • Compatibility: Optimized for DDR5-ready motherboards and modern platforms

How to Install Kingston FURY Beast 32GB DDR5 Memory Kit

Installing this Kingston FURY Beast kit is straightforward on DDR5–ready motherboards. Follow these steps to ensure proper seating and stable operation:

Step 1: Verify compatibility and prepare your system. Confirm that your motherboard supports DDR5 memory and has available DIMM slots. If you have a recent BIOS, consider checking for updates to optimize memory compatibility and XMP performance.

Step 2: Power down and ground yourself. Unplug the system, disconnect power, and touch a grounded metal surface to discharge any static electricity before handling modules.

Step 3: Open the memory slots. Release the retention clips at the ends of the DIMM slots to wide open positions so the modules can slide in smoothly.

Step 4: Align and insert the modules. Hold each Kingston FURY Beast module by the edges, align the notch on the module with the key in the slot, and press straight down until the clips click into place. For best dual-channel performance, install the two modules in the recommended slots indicated by your motherboard manual (typically color‑coded). Do not force the modules; if they don’t seat easily, remove and re-seat with even pressure.

Step 5: power up and verify. Reassemble the case, reconnect power, and boot the system. Enter the BIOS/UEFI to confirm the memory is detected at the rated speed. If your workload requires it, enable XMP/DOCP profiles to reach DDR5-5200 in supported boards. Save settings and boot into your operating system to confirm stability by running memory‑intensive tasks or a stress test.

Frequently asked questions

Q: What does 32GB (2x16GB) mean for performance?

A: A 32GB total capacity in a dual‑channel 2×16GB configuration provides ample room for modern games, streaming, and multitasking. It enables smoother multitasking, reduces stutter in memory-heavy titles, and supports demanding workflows without needing to swap to disk as often as smaller kits.

Q: What speed is this memory designed to run at, and do I need to enable XMP?

A: This kit is rated DDR5-5200 (PC5-41600). To achieve the rated speed, enable the XMP profile in your motherboard’s BIOS/UEFI if your platform supports it. Enabling XMP typically delivers the advertised speed and timings, though actual results may vary with motherboard, CPU, and system load.

Q: Are these modules ECC or unbuffered?

A: These Kingston FURY Beast modules are Non-ECC and Unbuffered, which is standard for consumer DDR5 memory designed for mainstream desktops and gaming PCs.

Q: Will this kit fit in my system with a compact case or small form factor build?

A: Yes. The kit uses standard 288-pin DIMMs with a slim heat spreader design suitable for most ATX, Micro-ATX, and small form factor builds. Always check your motherboard’s DIMM clearance and the physical space around the memory slots in your chassis.

Q: How durable is Kingston memory, and is there a warranty?

A: Kingston FURY memory is built for reliability, with stringent testing and a lifetime warranty backed by Kingston. This coverage provides peace of mind for long-term use in gaming rigs, workstations, and creative production systems.

Q: Can I use this kit on Intel and AMD platforms?

A: DDR5 memory is designed to be broadly compatible with modern Intel and AMD platforms that support DDR5. Always consult your motherboard’s qualified memory list (QVL) or the manufacturer’s compatibility guidance to ensure optimal performance with your specific CPU and motherboard combination.


Customer reviews

(0)

0 Out of 5 Stars


5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0


Showing - Of Reviews


You may also like

Recently viewed