Kingston FURY Renegade 16GB (2 x 8GB) DDR4 SDRAM Memory Kit – 3600MHz RGB

The Kingston FURY Renegade 16GB DDR4 memory kit is engineered for gamers, streamers, and power users who demand award‑winning speed, dramatic RGB flair, and rock‑solid stability. This kit ships as a 2x8GB pair, delivering a total of 16GB of high‑performance DDR4 memory designed to unlock faster data access, smoother multitasking, and improved frame rates in contemporary titles. With a bold heat spreader and vibrant RGB lighting, it’s not just about performance—it’s about style and reliability under load. Whether you’re building a new gaming rig, upgrading an existing setup, or pushing your system toward a higher overclock, Kingston FURY Renegade RAM is tuned to help you reach your performance targets without sacrificing compatibility.

• Blazing DDR4-3600MHz speed with CL16 timings: This memory kit runs at 3600 MT/s with CL16 latency, delivering faster data transfer, reduced stall cycles, and snappier system responsiveness for modern games, creative apps, and heavy multitasking. The 1.35V operation helps balance performance with power efficiency, helping keep thermals in check during long gaming sessions or intense workloads.
• RGB lighting and immersive customization: Kingston FURY RGB lighting brings your build to life with vibrant, programmable effects. The modules are designed to pair with motherboard RGB software and Kingston’s Fury CTRL software to synchronize lighting across compatible components, producing a cohesive and striking aesthetic for showpiece rigs or streaming setups alike.
• Intel XMP 2.0 ready for automatic tuning: With XMP 2.0 support, simply enable an approved profile in your motherboard BIOS to run the kit at its rated speed and timings. This makes it easier to achieve optimized performance without manual tuning, while maintaining system stability across a wide range of platforms.
• Reliable, compatible dual‑channel 16GB kit: The 2×8GB configuration provides 16GB of total memory in a dual‑channel setup, which helps maximize bandwidth and real‑world performance in modern games and multitasking environments. The modules use 288‑pin DIMM sockets, are non‑ECC, unbuffered, and single‑rank, designed for broad compatibility with most contemporary desktops and motherboard platforms.
• Durable build, performance you can rely on: The Renegade line is known for robust construction and long‑term reliability, backed by Kingston’s renowned engineering and a commitment to quality. The memory kit typically includes a limited lifetime warranty, giving you peace of mind as you push your system toward new performance frontiers.

Technical Details of Kingston FURY Renegade 16GB (2 x 8GB) DDR4 SDRAM Memory Kit

• Capacity: 16GB (2 x 8GB)
• Module Type: DDR4 SDRAM
• Speed: DDR4‑3600 (PC4‑28800)
• CAS Latency (CL): CL16
• Voltage: 1.35V
• Form Factor: 288‑pin DIMM
• Rank/Configuration: Single‑rank, Dual‑channel kit (2 x 8GB)
• ECC/Buffered: Non‑ECC, Unbuffered
• RGB: Yes, Kingston FURY RGB lighting
• Compatibility: Intel XMP 2.0 ready; broadly compatible with modern motherboards for Intel and AMD platforms

How to install Kingston FURY Renegade 16GB (2 x 8GB) DDR4 SDRAM Memory Kit

• Power down your PC, unplug the power cord, and ground yourself to prevent static discharge.
• Open the computer case and locate the memory DIMM slots on your motherboard. Ensure you are installing into the correct slots for dual‑channel operation (often labeled A2 and B2 on many boards).
• Align the memory module notches with the slot keys and press firmly and evenly until the modules click into place. Do not force the sticks; if they do not seat with moderate pressure, remove and reseat.
• Install both modules in the recommended slots to enable dual‑channel performance. Ensure both modules are properly seated and secured with the locking clips.
• Reconnect power and boot into your system. Enter the BIOS/UEFI and enable XMP 2.0 to run the memory at 3600MHz with CL16 timings. Save changes and reboot. If your system is unstable at XMP settings, try a lower speed or a manual adjustment within safe voltage ranges.

Frequently asked questions

• Q: Is this memory compatible with AMD Ryzen systems?

  A: Yes. The Kingston FURY Renegade 16GB kit is designed for modern desktops and works across a broad range of motherboards, including those built for AMD Ryzen processors, when used on compatible DDR4 slots and with appropriate BIOS settings.

• Q: What is the total capacity and module configuration?

  A: The kit provides 16GB total memory, consisting of 2 x 8GB DDR4 modules (2×8GB), configured for dual‑channel operation to maximize bandwidth and performance in everyday and gaming workloads.

• Q: What speed and timings does it use?

  A: The kit runs at DDR4‑3600MHz with CL16 timings at 1.35V. This combination delivers fast data transfers and responsive performance in multiplayer titles, creative software, and multitasking environments.

• Q: Does this RAM have RGB lighting?

  A: Yes. It features Kingston FURY RGB lighting, which can be controlled or synchronized using compatible motherboard software or Kingston’s Fury CTRL utility for customized effects.

• Q: Do I need to enable XMP to reach the advertised speed?

  A: For best results, enable an approved XMP 2.0 profile in your motherboard BIOS. This allows the memory to run at its rated 3600MHz with the listed latency. If XMP is unavailable or unstable on your system, you can run at a lower speed by adjusting settings manually or selecting a profile that your platform supports.

• Q: Is this kit non‑ECC and unbuffered?

  A: Yes. The Kingston FURY Renegade DDR4 kit is non‑ECC and unbuffered, designed for consumer desktop platforms and standard gaming builds without error‑correcting features.