Kingston FURY Renegade 16GB (2 x 8GB) DDR4 Memory Kit — DDR4-4600 CL19, 1.50V

Upgrade your desktop with the Kingston FURY Renegade 16GB (2 x 8GB) DDR4 memory kit and unlock peak performance for gaming, streaming, and creative workloads. This dual-channel kit pairs two 8GB modules to deliver a powerful 16GB total capacity, designed to maximize bandwidth and minimize latency across modern gaming rigs and productivity setups. Built for speed and reliability, the Renegade series is engineered to run at DDR4-4600 with CL19 timings, providing exceptional responsiveness when loading large textures, handling open-world environments, or multitasking between demanding applications. The 288-pin DIMMs operate at a conservative 1.50V, balancing speed with efficiency to keep thermals in check during extended gaming sessions. With its unbuffered, non-ECC design and single-rank configuration, this kit suits mainstream desktop platforms while offering plenty of headroom for overclocking on compatible motherboards. Kingston FURY Renegade memory is thoroughly tested to ensure compatibility across a wide range of Intel and AMD systems, making it a dependable choice for builders who want a straightforward upgrade path without sacrificing performance.

• High-speed DDR4-4600 performance delivers faster game loads, quicker texture streaming, and improved overall system responsiveness compared to standard DDR4 kits.
• 16GB total capacity (2 x 8GB) enables robust multitasking and smooth gameplay with modern titles, while maintaining efficient dual-channel bandwidth.
• Low voltage and optimized timings—1.50V with CL19—to balance performance and power efficiency for sustained gaming sessions and productivity tasks.
• Dual-channel, unbuffered, non-ECC memory designed for mainstream desktops, providing reliable performance on a wide range of motherboards without the complexity of ECC.
• XMP 2.0 ready for easy automatic overclocking on compatible motherboards, unlocking the advertised DDR4-4600 speed with minimal manual tuning.

Technical Details of Kingston FURY Renegade 16GB DDR4 SDRAM Memory Kit

• Capacity: 16 GB (2 x 8 GB)
• Module Type: 288-pin DIMM
• Memory Type: DDR4 SDRAM
• Speed: DDR4-4600 (PC4-36800)
• CAS Latency: CL19
• Voltage: 1.50 V
• ECC: Non-ECC
• Registered/Unbuffered: Unbuffered
• Rank: Single-rank

How to install Kingston FURY Renegade 16GB DDR4 Memory

• Power down your PC and unplug it. Ground yourself to avoid static discharge before handling memory modules.
• Open the computer case and locate the memory slots on the motherboard. Identify the recommended DIMM slots for dual-channel operation as specified by your motherboard manual.
• Align the notch in each DIMM with the key in the memory slot. Gently but firmly press the module straight down into the slot until the latches click into place on both sides.
• Install both 8GB modules (2 x 8GB) in the correct slots to enable dual-channel performance. Ensure they are fully seated and latched.
• Close the case, reconnect power, and boot into BIOS/UEFI. Enable XMP 2.0 to set the memory to its rated speed (DDR4-4600) if your motherboard supports it. If automatic XMP isn’t available, you may manually adjust the memory frequency, timings, and voltage to the specifications (1.50V, CL19).
• Save changes and reboot. If you experience instability, try reseating the modules or testing one module at a time to verify compatibility with your motherboard.

Frequently asked questions

• Q: What speed does Kingston FURY Renegade memory run at? A: The kit is rated DDR4-4600 (PC4-36800), with XMP 2.0 support on compatible boards to enable the rated speed.
• Q: Is this memory ECC or registered? A: No. It is Non-ECC and Unbuffered, intended for mainstream desktops and consumer platforms.
• Q: How much capacity does this kit provide? A: The kit provides 16GB total, composed of two 8GB modules (2 x 8GB).
• Q: Will this memory work with my motherboard? A: It should be compatible with most DDR4-enabled desktops that support 16GB kits and DDR4-4600 speeds; check your motherboard’s QVL (Qualified Vendors List) and BIOS support for XMP profiles.
• Q: Do I need to enable XMP to reach the advertised speed? A: Yes. Enabling XMP 2.0 in the BIOS is typically required to run the memory at its rated DDR4-4600 speed on compatible systems.
• Q: Is Kingston FURY Renegade suitable for gaming and content creation? A: Absolutely. The 16GB dual-channel kit provides ample capacity and high frequencies that benefit gaming frame rates, texture streaming, and multitasking workloads such as video editing and streaming alongside gaming.