Kingston FURY Renegade 32GB (2 x 16GB) DDR4 SDRAM Memory Kit

Power your gaming rig, creator workstation, or multitasking desktop with the Kingston FURY Renegade 32GB DDR4 memory kit. This high-performance 32 GB kit ships as two 16 GB modules engineered for fast, stable operation under load. With a blazing 3600 MHz data rate and a tight CL16 latency, it delivers snappy responsiveness for modern titles, streaming, video editing, and heavy multitasking. Operating at a modest 1.35 V, these DIMMs balance speed and efficiency, helping your system stay cool and energy-efficient even during long sessions. The Kingston FURY Renegade family is built around a robust 288-pin DIMM design with dual-rank memory that maximizes bandwidth while maintaining broad compatibility with a wide range of contemporary motherboards. This non-ECC, unbuffered kit is designed for plug-and-play upgrades, delivering reliable performance right out of the box and backed by a lifetime warranty for lasting peace of mind.

• 32 GB total capacity (2 x 16 GB) designed for heavy multitasking, content creation, and modern gaming without bottlenecks.
• DDR4-3600 speed (PC4-28800) with CL16 latency for fast data access, smoother frame delivery, and reduced load times.
• Dual-rank memory architecture in a 288-pin DIMM form factor supports higher bandwidth and efficient data flow on supported platforms.
• Low power consumption at 1.35 V, helping to keep system temperatures in check while delivering top-tier performance.
• Non-ECC, unbuffered design with broad motherboard compatibility and a lifetime warranty for dependable, long-term use.

Technical Details of Kingston FURY Renegade 32GB (2 x 16GB) DDR4 SDRAM Memory Kit

• Capacity: 32 GB (2 x 16 GB)
• Type: DDR4 SDRAM
• Speed: DDR4-3600 (PC4-28800)
• Latency: CL16
• Voltage: 1.35V
• Pins/Form Factor: 288-pin DIMM
• ECC: Non-ECC
• Buffered: Unbuffered
• Rank: Dual-rank
• Warranty: Lifetime

How to install Kingston FURY Renegade 32GB DDR4 Memory Kit

Installing the Kingston FURY Renegade memory kit is a straightforward upgrade that can yield noticeable improvements in system responsiveness and multitasking capability. Before you begin, ensure your PC is powered off and disconnected from power. Ground yourself to prevent static discharge, and open the case to access the memory slots. If you are upgrading an existing system, you may remove old modules to install your new kit, but you can also slot the new modules alongside existing ones if the motherboard supports dual-channel operation and you have compatible slots available.

• Identify the correct memory slots on your motherboard. For best results, consult your motherboard’s manual or the QVL to confirm supported configurations and slot ordering for dual-channel operation.
• Hold the memory modules by the edges and align the notch on the DIMMs with the key in the slots. Seats are designed to accept the module in only one orientation to prevent damage.
• Firmly press the modules straight down into the slots until the latches click into place and the modules are fully seated. Ensure even pressure on both ends so the modules are secure.
• Reassemble your case, reconnect power, and boot the system. Enter BIOS/UEFI to enable the XMP (or DOCP/EOCP, depending on your platform) profile to run the memory at its rated 3600 MHz speed. Save changes and reboot.
• Once the system posts, run a memory stress test or diagnostic tool to confirm stability. If you encounter boot issues, reseat the modules, try a different slot combination, or reset BIOS to defaults before re-enabling XMP.

Frequently asked questions

• Q: Is Kingston FURY Renegade memory compatible with my motherboard?

  A: Kingston FURY Renegade DDR4 memory is designed for broad compatibility with modern consumer platforms. It is non-ECC and unbuffered, using a standard 288-pin DIMM form factor. For the best results, check your motherboard’s memory QVL (Qualified Vendors List) and ensure that the board supports DDR4-3600 and dual-channel configurations. Enabling XMP in the BIOS will typically allow the kit to run at its rated speed on supported systems.

• Q: What kind of performance can I expect from this kit in gaming and multitasking?

  A: The 32 GB kit (2x16 GB) paired with DDR4-3600 CL16 memory provides substantial bandwidth and low-latency access, translating to smoother game loading, faster level streaming, quicker texture loading, and improved multitasking when you’re running multiple applications such as games, streaming software, and productivity tools simultaneously. The dual-rank configuration helps maximize memory bandwidth on compatible motherboards, contributing to snappier overall system responsiveness.

• Q: Do I need to adjust BIOS settings to run at 3600 MHz?

  A: Yes. To achieve the rated 3600 MHz speed, enable the XMP (Intel) or DOCP/EOCP (AMD) profile in your motherboard BIOS. If you encounter instability, ensure your cooling is adequate, voltage is set correctly, and your system does not exceed your motherboard’s or CPU’s memory supported limits. If needed, start with a lower speed and gradually increase to the rated specification while testing stability.

• Q: What warranty coverage comes with Kingston FURY Renegade memory?

  A: The kit is backed by Kingston’s lifetime warranty, reflecting the brand’s commitment to reliability and long-term support. This warranty covers manufacturing defects and provides peace of mind for your investment in high-performance memory.