Kingston FURY Renegade 32GB (2 x 16GB) DDR4 SDRAM Memory Kit

Power your desktop to new levels of speed and responsiveness with the Kingston FURY Renegade 32GB memory kit. This high-performance DDR4 RAM brings a formidable combination of capacity, speed, and reliability to gaming rigs, content creators, and multitaskers who push their systems to the limit. With a total of 32GB across two 16GB modules, you gain abundant headroom for modern titles, heavy multitasking, and memory-hungry workloads like video editing, 3D rendering, and virtual machines. The kit is built around a DDR4-4000 (PC4-32000) specification and CL19 latency, delivering snappy data access and smoother frame rates in demanding environments. Operating at a modest 1.35V, these modules balance performance with efficiency, helping to keep thermals in check during extended gaming sessions or productivity marathons. The Kingston FURY Renegade series is not only about speed—it also features a bold heat spreader design that adds a striking, premium aesthetic to showpiece builds and RGB-enabled systems. Designed for desktop use, this 288-pin DIMM kit is unbuffered and non-ECC, ensuring broad compatibility with a wide range of consumer motherboards while still offering excellent headroom for overclocking enthusiasts who want to explore higher speeds through XMP profiles. If you demand a memory kit that can handle modern games at high settings, multi-monitor setups, and heavy workloads without compromising stability, the Kingston FURY Renegade 32GB kit is engineered to deliver.

• High-speed DDR4-4000 (PC4-32000) memory with CL19 timing delivers rapid data access for faster game loading, smoother textures, and snappier desktop responsiveness.
• 32GB total capacity in a 2x16GB kit provides ample headroom for modern gaming, streaming, and content creation, enabling seamless multitasking without slowdowns.
• Dual-rank, unbuffered, non-ECC design ensures broad compatibility with a wide range of desktop motherboards while maintaining reliable performance under load.
• Efficient 1.35V operation reduces power consumption and heat output, helping maintain cooler system temperatures during extended gaming sessions and intense workloads.
• Stylish Kingston FURY Renegade heat spreader and aggressive aesthetics complement high-end builds, while XMP 2.0 readiness enables easy automatic overclocking on compatible boards.

Technical Details of Kingston FURY Renegade 32GB (2 x 16GB) DDR4 SDRAM Memory Kit

• Capacity: 32GB (2 x 16GB)
• Memory Type: DDR4 SDRAM
• Speed: DDR4-4000 (PC4-32000)
• CAS Latency: CL19
• Voltage: 1.35V
• Rank: Dual-rank
• Buffered/Unbuffered: Unbuffered
• ECC: Non-ECC
• Pin Count: 288-pin
• Form Factor: DIMM
• Heat Spreader: Aluminum Renegade heat spreader
• Recommended Use: Desktop systems; gaming, content creation, and multitasking

How to install Kingston FURY Renegade 32GB DDR4 SDRAM Memory Kit

Installing memory is a straightforward upgrade that most users can complete with the PC powered down. Here are practical steps to ensure proper seating, compatibility, and optimal performance:

• Power off the computer, unplug the power cord, and discharge any residual electricity by touching a grounded metal surface.
• Open the computer case and locate the motherboard memory slots. Consult your motherboard manual to identify the recommended dual-channel configuration for a 2x16GB kit.
• If you’re upgrading from existing modules, remove any old DIMMs first by gently pulling the locking tabs outward and lifting the modules straight up.
• Align the notch on each Kingston FURY Renegade DIMM with the slot key and insert at a slight angle. Press down evenly until the latches snap into place, securing the module.
• Install the second DIMM in the correct slot, ensuring both modules are seated firmly. Close the case, reconnect power, and boot the system.
• Enter the BIOS/UEFI and verify the memory is detected. Enable the appropriate XMP profile (XMP 2.0) to run the modules at DDR4-4000 if your motherboard supports it. Save changes and reboot.
• Once the system posts, you can use your operating system’s reporting tools or a hardware monitor to confirm the memory is running at the rated speed and timings.

Frequently Asked Questions

• Q: What is the total capacity of this Kingston memory kit?
  A: The kit provides 32GB of memory total, assembled as two 16GB modules (2 x 16GB).
• Q: At what speed does this kit operate?
  A: It is rated for DDR4-4000 (PC4-32000) with a CAS latency of CL19, optimized for high-speed desktop performance.
• Q: Is this memory ECC or buffered?
  A: No. It is Non-ECC and Unbuffered, designed for mainstream consumer desktops and easy compatibility with a wide range of motherboards.
• Q: Is the memory compatible with both Intel and AMD platforms?
  A: Yes. The Kingston FURY Renegade DDR4 memory is designed for use across modern Intel and AMD desktop platforms. To reach the rated speed on compatible boards, enable XMP in the BIOS/UEFI.
• Q: Does this kit support XMP for automatic overclocking?
  A: Yes, the memory supports XMP 2.0 on compatible motherboards, allowing automatic setting of the rated speed and timings for easy optimization.