Kingston FURY Renegade 32GB (4 x 8GB) DDR4 SDRAM Memory Kit

Upgrade your gaming rig or creative workstation with Kingston FURY Renegade 32GB DDR4 memory kit. This four-module kit (4 x 8GB) is engineered for high-speed performance, delivering ample headroom for multitasking, streaming, content creation, and the most demanding titles. With DDR4-3200 memory, low CL16 latency, and a sleek heat-spreader, you’ll experience snappier system responsiveness, faster load times, and smoother gameplay. The Kingston FURY Renegade line is designed to provide reliability and headroom for enthusiasts who crave both power and style, making it a top pick for PC builders who want to push their rigs further without compromising stability. The RGB-enabled modules add a vivid, customizable glow to your build, while the 1.35V operation offers efficiency and broad compatibility with modern motherboards. Whether you’re building a new rig or upgrading an existing one, this kit is optimized for performance on contemporary platforms and is compatible with a wide range of motherboards that support DDR4 memory.

• High-capacity quad-channel kit: 32GB total (4 x 8GB) designed for heavy multitasking, content creation, and modern gaming. The four modules reduce density per DIMM, helping maintain stability on many consumer motherboards while delivering ample memory for demanding workloads.
• DDR4-3200MHz speed with CL16 latency: Provides fast memory bandwidth and responsive performance for games, applications, and productivity tasks. The CL16 timing helps minimize latency, translating to quicker data access and smoother system operation during intense sessions.
• RGB lighting with heat spreader: Kingston FURY RGB lighting adds a dynamic aesthetic to your build. The robust heat spreader manages heat during extended gaming sessions and overclocking, helping maintain performance and longevity in hot environments.
• Unbuffered, non-ECC 288-pin DIMMs at 1.35V: Standard desktop DDR4 format ensures broad compatibility with mainstream motherboards while delivering energy-efficient performance and reliable operation under load.
• XMP-ready for simple overclocking and broad compatibility: Profiles that simplify enabling rated speeds on compatible Intel-based systems, with flexible tuning options for enthusiasts who want that extra boost—without complex manual configuration.

Technical Details of Kingston FURY Renegade 32GB (4 x 8GB) DDR4 SDRAM Memory Kit

• Capacity: 32GB (4 x 8GB)
• Type: DDR4 SDRAM Memory Kit
• Speed: DDR4-3200 (PC4-25600)
• Latency (CAS): CL16
• Voltage: 1.35V
• Form Factor: 288-pin DIMM
• Configuration: Non-ECC, Unbuffered
• Rank: Single-rank memory
• RGB: Kingston FURY RGB lighting with customizable effects
• Heat Spreader: Yes, for improved cooling and longevity
• Compatibility: Optimized for modern desktops; supports Intel XMP 2.0 profiles for straightforward overclocking on supported systems

How to Install Kingston FURY Renegade 32GB (4 x 8GB) DDR4 SDRAM Memory Kit

• Power down your PC, unplug the power cord, and discharge any static build-up by touching a grounded metal surface.
• Open your computer case and locate the motherboard memory slots. If you’re upgrading, remove existing modules with care by releasing the retaining clips on both ends of each slot.
• Consult your motherboard manual to identify the optimal memory slots for a 4-DIMM configuration. In most systems, popular slots are color-coded; install modules in the recommended first slots to enable dual- or quad-channel operation.
• Align the notch on each memory module with the slot key and firmly press straight down until the latches click into place. Do not force the modules; if you feel resistance, reseat and try again.
• Reconnect power and boot into the BIOS/UEFI. If your motherboard supports Intel XMP 2.0, enable the appropriate profile to run at 3200MHz (or adjust manually to the rated timings and voltage if needed). Save changes and exit to boot into your operating system.

Frequently asked questions

Is this memory kit compatible with both Intel and AMD systems?

Yes. The Kingston FURY Renegade 32GB DDR4 kit is designed for mainstream desktops that accept DDR4 memory. For best performance, enable the rated speed via the motherboard’s BIOS using an XMP 2.0 profile on Intel-based systems or DOCP/EOCP equivalents on AMD platforms where available. Always check your motherboard’s QVL (Qualified Vendors List) and BIOS for compatibility with higher-speed memory.

Do I need to enable XMP to run at 3200MHz?

Enabling XMP (Intel XMP 2.0 or equivalent on AMD platforms) is typically required to reach the rated 3200MHz speed with the provided timings. If XMP isn’t available or supported by your motherboard, you can run the kit at a safe, lower default speed with standard timings, but performance may be reduced compared to the rated speed.

Can I synchronize the RGB lighting with my motherboard software?

Yes. Kingston FURY RGB lighting is designed to work with popular motherboard RGB control software where supported by the platform. This includes software from major motherboard manufacturers, and you can also customize lighting effects using Kingston’s own software where applicable. Compatibility varies by motherboard and BIOS, so check your motherboard’s lighting software support for the best experience.

What warranty does Kingston offer for this memory kit?

Kingston generally backs FURY memory with a limited lifetime warranty and toll-free technical support. Warranty terms can vary by region, so confirm coverage for your country at the time of purchase or with your retailer.

What should I do if I experience instability or POST issues after installation?

Start with reseating all modules and verifying that you installed them in the correct slots for quad-channel operation. Check BIOS/UEFI settings to ensure the correct speed, timings, and voltage. Run a memory diagnostic tool (such as Windows Memory Diagnostic or MemTest86) to identify potential issues. If instability persists, try reducing the memory speed to a lower profile or loosen timing slightly, then test stability. If problems continue, contact Kingston support for guidance and warranty options.

Kingston FURY Renegade memory combines high-capacity, high-speed DDR4 with bold aesthetics and robust cooling to deliver a balanced upgrade for gaming rigs and productivity workstations. The four 8GB modules provide enough headroom for modern multitasking workloads, photo and video editing, streaming, and modern titles that demand fast memory access. The CL16 latency paired with 3200MHz performance helps minimize lag in fast-paced applications and reduces bottlenecks when your system handles data-heavy tasks. The RGB lighting adds a personal touch to your build, letting you tailor color schemes and effects to your setup or team branding, while the heat spreader helps keep temperatures in check during intense gaming sessions or rendering tasks. For builders seeking reliability, straightforward setup, and a memory kit that blends style with performance, Kingston FURY Renegade 32GB (4 x 8GB) DDR4 SDRAM Memory Kit stands out as a compelling option.