Kingston ValueRAM 16GB DDR5 Memory Kit (2x8GB)

Upgrade your system with Kingston ValueRAM DDR5 memory that blends reliability, speed, and value. This 16GB kit comprises two 8GB DDR5 modules designed to deliver a balanced performance boost for modern desktops and workstations. Whether you’re multitasking with dozens of browser tabs, editing high-resolution media, or gaming with demanding titles, this kit is built to help your PC respond quicker and run more smoothly. Engineered for compatibility and tested for reliability, it’s an excellent choice for users who demand solid, cost-effective memory upgrades without compromising stability or warranty coverage.

• High-capacity 16GB (2x8GB) kit tailored for heavy multitasking, resource-intensive apps, and modern games, delivering smoother window switching and reduced stutter across everyday workloads and creative workflows.
• DDR5-5600 (PC5-44800) bandwidth uplift provides significant performance gains in content creation, virtual machines, and data-heavy tasks, enhancing overall system responsiveness during memory-intensive workloads.
• Single-rank, 288-pin DIMMs, unbuffered, and non-ECC — designed for broad compatibility with mainstream desktop motherboards, enabling straightforward upgrades without specialized ECC configurations.
• Low operating voltage of 1.10V reduces heat output and power draw, contributing to cooler system operation during extended gaming sessions, video editing, or long-running simulations.
• Backed by Kingston ValueRAM’s lifetime warranty, combining dependable performance with long-term value and peace of mind for your home or office PC builds.

Technical Details of Kingston ValueRAM 16GB (2 x 8GB) DDR5 SDRAM Memory Kit

• Memory Type: DDR5 SDRAM
• Capacity: 16GB (2 x 8GB)
• Speed: DDR5-5600
• Bandwidth: PC5-44800
• CAS Latency: CL46
• Voltage: 1.10V
• Module Type: 288-pin DIMM
• Configuration: Dual-channel capable; unbuffered
• Rank: Single-rank
• ECC: Non-ECC
• Timing: 46-46-46 (tRCD-tRP-tRAS) typical for CL46 at 5600 MT/s
• Warranty: Lifetime
• Form Factor: Desktop memory module, designed for standard ATX/mATX cases

How to install Kingston ValueRAM DDR5 16GB Kit

Installing Kingston ValueRAM DDR5 memory is straightforward, but following proper static-safe handling and seating procedures helps prevent damage and ensures optimal performance. Below is a thorough guide to help you install with confidence and maximize compatibility.

• Prepare your workstation: Power down the computer completely, unplug the power cord, and ground yourself to discharge any static electricity. Consider using an anti-static wrist strap if available.
• Open the case and locate memory slots: Remove the side panel to access the motherboard and locate the DDR5 DIMM slots. If you are replacing existing modules, carefully release the retention clips on both sides of the slot(s) before removing old RAM.
• Check motherboard compatibility: Confirm that your motherboard supports DDR5 memory, 288-pin DIMMs, and the rated speed (DDR5-5600). Consult the motherboard manual or the manufacturer’s QVL for compatibility notes and supported profiles.
• Align and insert: Hold each memory module by its edges, align the notch with the slot keying, and seat the module straight into the slot. Apply even, firm pressure on the module’s edges until the retention clips click into place on both sides. Do not wiggle or force the module.
• Install in the correct configuration: If you are installing a two-module kit (2x8GB), insert them into the recommended primary memory channels as specified by your motherboard’s manual to enable dual-channel operation for optimal bandwidth.
• Power-on and verify: Reassemble the case, plug in the system, and power on. Enter the BIOS/UEFI to verify the memory is recognized at the expected speed (DDR5-5600). If your board supports XMP/DOCP, enable the profile to run the memory at its rated speed and timings.
• Boot and test stability: Boot into your operating system and run memory diagnostics or a stress test to ensure stability. If you encounter errors, reseat the modules, reseat the CPU and motherboard power connections, or test modules individually to identify a potential faulty stick.
• Optimize for performance: After confirming stability, you may enable XMP/DOCP profiles and verify that the system operates at the correct voltage and timing. Keep firmware and motherboard BIOS up to date for best compatibility with newer DDR5 memory kits.

Frequently asked questions

• Q: Is Kingston ValueRAM DDR5-5600 compatible with my motherboard? A: It is designed for DDR5-enabled desktop motherboards with 288-pin DIMMs. Always check your motherboard’s memory compatibility list and manual to confirm support for DDR5-5600 and unbuffered non-ECC modules. If available, enable the XMP/DOCP profile in the BIOS to run the memory at its rated speed.
• Q: Do I need to enable XMP/DOCP to achieve DDR5-5600 speeds? A: Yes. To reach the rated 5600 MT/s, your motherboard must support and be configured to use the XMP or DOCP memory profile. Without enabling this profile, memory often runs at a standard JEDEC speed, which is lower than the advertised rating.
• Q: Is this memory suitable for laptops or notebook PCs? A: This Kingston ValueRAM kit is a desktop memory solution with 288-pin DIMMs. Laptop memory uses smaller SO-DIMM modules, so be sure you choose the correct form factor for your device before purchase.
• Q: What is the warranty on Kingston ValueRAM? A: Kingston provides a lifetime warranty on ValueRAM, covering manufacturing defects and ensuring long-term reliability with proper installation and usage. Be sure to register your product if required by your region.
• Q: Can I mix these modules with existing RAM? A: In many cases you can, but for best performance and stability pair modules of the same speed, capacity, and rank from the same kit. Mixing different DRAM generations or speeds may reduce performance or cause compatibility issues. Always run memory tests after installation.